Highly sensitive differential fiber-optic SPR sensor in telecom band

Differential Refractive Index Sensor Based on Coupled Plasmon Waveguide Resonance in the C-Band

We proposed a differential fiber-optic refractive index sensor based on coupled plasmon waveguide resonance (CPWR) in the C-band. The sensor head is a BK7 prism coated with ITO/Au/ITO/TiO₂ film. CPWR is excited on the film by the S-polarized components of an incident light. The narrow absorption peak of CPWR makes it possible to realize dual-wavelength differential intensity (DI) interrogation by using only one incident point. To implement DI interrogation, we used a DWDM component to sample the lights with central wavelengths of 1529.55 and 1561.42 nm from the lights reflected back by the sensor head. The intensities of the dual-wavelength lights varied oppositely within the measurement range of refractive index, thus, a steep slope was produced as the refractive index of the sample increased. The experimental results show that the sensitivity is 32.15/RIUs within the measurement range from 1.3584 to 1.3689 and the resolution reaches 9.3 × 10⁻⁶ RIUs. Benefiting from the single incident point scheme, the proposed sensor would be easier to calibrate in bio-chemical sensing applications. Moreover, this sensing method is expected to be applied to retro-reflecting SPR sensors with tapered fiber tip to achieve better resolution than wavelength interrogation.

2D material assisted SMF-MCF-MMF-SMF based LSPR sensor for creatinine detection

The purpose of this work is to propose a simple, portable, and sensitive biosensor structure based on singlemode fiber-multicore fiber-multimode fiber-singlemode fiber (SMF-MCF-MMF-SMF) for the detection of creatinine in the human body. Chemical etching has been used to modify the diameter of the sensing probe to approximately 90 μm in order to generate strong evanescent waves (EWs). The sensor probe is functionalized with graphene oxide (GO), gold nanoparticles (AuNPs), molybdenum disulfide nanoparticles (MoS₂-NPs), and creatininase (CA) enzyme. The concentration of creatinine is determined using fiber optic localized surface plasmon resonance (LSPR). While EWs are used to enhance the LSPR effect of AuNPs, two-dimensional (2D) materials (GO and MoS₂-NPs) are used to increase biocompatibility, and CA is used to increase probe specificity. Additionally, HR-TEM and UV-visible spectroscopy are used to characterize and measure the nanoparticle (NP) morphology and absorption spectrum, respectively. SEM is used to characterize the NPs immobilized on the surface of the fiber probe. The sensor probe's reusability, reproducibility, stability, selectivity, and pH test results are also tested to verify the sensor performance. The sensitivity of proposed sensor is 0.0025 nm/μM, has a standard deviation of 0.107, and has a limit of detection of 128.4 μM over a linear detection range of 0 - 2000 μM.