Performance scaling of a 10-GHz solid-state laser enabling self-referenced CEO frequency detection without amplification

Ultrafast Yb:YAG laser oscillator with gigahertz repetition rate

We present a SESAM modelocked Yb:YAG solid-state laser providing low-noise narrowband pulses with a pulse duration of 606 fs at a 1.09-GHz repetition rate, delivering up to 2.5 W of average output power. This laser provides access to a new parameter space that could previously not be reached by solid-state lasers and, to the best of our knowledge, is the first modelocked solid-state Yb:YAG laser in the gigahertz regime. This is achieved by introducing a single additional intracavity element, specifically a nonlinear birefringent YVO4 crystal, for soliton formation, polarization selection, and cavity intensity clamping. The isotropic pump absorption in Yb:YAG allows for stable and low-noise operation with multimode fiber pumping. This laser is ideally suited as a seed source for many commercial high-power Yb-doped amplification systems operating at a center wavelength around 1.03 µm. The laser exhibits a high power per comb line of 5.0 mW which also makes it interesting for applications in frequency comb spectroscopy, especially if it is used to pump an optical parametric oscillator. We measure a relative intensity noise (RIN) of 0.03%, integrated from 1 Hz to 10 MHz. Furthermore, we show that the laser timing jitter for noise frequencies >2 kHz is fully explained by a power-dependent shift in the center wavelength of 0.38 nm/W due to the quasi-three-level laser gain material. The narrow gain bandwidth of Yb:YAG reduces this contribution to noise in comparison to other SESAM modelocked Yb-doped lasers.

Efficient high-power sub-50-fs gigahertz repetition rate diode-pumped solid-state laser

In this article we present a directly diode-pumped high-power Kerr-lens mode-locked Yb:CALGO bulk laser oscillator operating at 1-GHz repetition rate. We report on two laser configurations optimized for either highest average power or shortest pulse duration. In the first configuration optimized for high average power, the oscillator delivers up to 6.9 W of average power, which is the highest average power of any ultrafast laser oscillator operating at gigahertz repetition rate. The 93-fs pulses have a peak power of 64 kW, and the optical-to-optical efficiency amounts to 37%. In the second configuration optimized for short pulse duration, we demonstrate 48-fs pulses at 4.1 W of average power corresponding to a higher peak power of 74 kW with 21% optical-to-optical efficiency. This is the shortest pulse duration and the highest peak power demonstrated by any GHz-class Yb-based laser oscillator. The compact laser setup is directly pumped by a low-cost multimode fiber-coupled laser diode and has a high potential as an economical yet powerful source for various applications.

Carrier-envelope offset frequency dynamics of a 10-GHz modelocked laser based on cascaded quadratic nonlinearities

Cascaded quadratic nonlinearities from phase-mismatched second-harmonic generation build the foundation for robust soliton modelocking in straight-cavity laser configurations by providing a tunable and self-defocusing nonlinearity. The frequency dependence of the loss-related part of the corresponding nonlinear response function causes a power-dependent self-frequency shift (SFS). In this paper, we develop a simple analytical model for the SFS-induced changes on the carrier-envelope offset frequency (f_CEO) and experimentally investigate the static and dynamic f_CEO dependence on pump power. We find good agreement with the measured dependence of f_CEO on laser output power, showing a broad f_CEO tuning capability from zero up to the pulse repetition rate. Moreover, we stabilize the relative intensity noise to the -157 dBc/Hz level leading to a tenfold reduction in f_CEO-linewidth.

Picosecond ultrasonics with a free-running dual-comb laser

We present a free-running 80-MHz dual-comb polarization-multiplexed solid-state laser which delivers 1.8 W of average power with 110-fs pulse duration per comb. With a high-sensitivity pump-probe setup, we apply this free-running dual-comb laser to picosecond ultrasonic measurements. The ultrasonic signatures in a semiconductor multi-quantum-well structure originating from the quantum wells and superlattice regions are revealed and discussed. We further demonstrate ultrasonic measurements on a thin-film metalized sample and compare these measurements to ones obtained with a pair of locked femtosecond lasers. Our data show that a free-running dual-comb laser is well-suited for picosecond ultrasonic measurements and thus it offers a significant reduction in complexity and cost for this widely adopted non-destructive testing technique.

Advances of Yb:CALGO Laser Crystals

Yb:CaGdAlO4, or Yb:CALGO, a new laser crystal, has been attracting increasing attention recently in a myriad of laser technologies. This crystal features salient thermal, spectroscopic and mechanical properties, which enable highly efficient and safe generation of continuous-wave radiations and ultrafast pulses with ever short durations. More specifically, its remarkable thermal-optic property and its high conversion efficiency allow high-power operation. Its high nonlinear coefficient facilitates study of optimized mode locking lasers. Besides, its ultrabroad and flat-top emission band benefits the generation of complex structured light with outstanding tunability. In this paper, we review the recent advances in the study of Yb:CALGO, covering its physical properties as well as its growing applications in various fields and prospect for future development.

2-GHz watt-level Kerr-lens mode-locked Yb:KGW laser

We report on a 2-GHz high-power Kerr-lens mode-locked Yb:KGW laser pumped by a single-mode fiber laser. The output performance for two different output coupling rates was investigated. Stable bidirectional mode-locking operation at the repetition rate of 2.157 GHz was obtained with a 0.6% output coupler. The average output powers of bidirectional operation are 741 mW and 746 mW, with 123-fs and 126-fs pulse durations, respectively. By using a 1.6% output coupler, unidirectional mode-locking is achieved with 145-fs pulse duration and 1.7-W average output power, which, to the best of our knowledge, is the highest average power from Kerr-lens mode-locked GHz femtosecond oscillators.

Full optical SESAM characterization methods in the 1.9 to 3-µm wavelength regime

Semiconductor saturable absorber mirrors (SESAMs) are widely used for modelocking of various ultrafast lasers. The growing interest for SESAM-modelocked lasers in the short-wave infrared and mid-infrared regime requires precise characterization of SESAM parameters. Here, we present two SESAM characterization setups for a wavelength range of 1.9 to 3 µm to precisely measure both nonlinear reflectivity and time-resolved recovery dynamics. For the nonlinear reflectivity measurement, a high accuracy (<0.04%) over a wide fluence range (0.1-1500 µJ/cm²) is achieved. Time-resolved pump-probe measurements have a resolution of about 100 fs and a scan range of up to 680 ps. Using the two setups, we have fully characterized three different GaSb-SESAMs at an operation wavelength of 2.05 µm fabricated in the FIRST lab at ETH Zurich. The results show excellent performance suitable for modelocking diode-pumped solid-state and semiconductor disk lasers. We have measured saturation fluences of around 4 µJ/cm², modulation depths varying from 1% to 2.4%, low non-saturable losses (∼ 0.2%) and sufficiently fast recovery times (< 32 ps). The predicted influence of Auger recombination in the GaSb material system is also investigated.

Femtosecond dual-comb Yb:CaF2 laser from a single free-running polarization-multiplexed cavity for optical sampling applications

Dual optical frequency combs are an appealing solution to many optical measurement techniques due to their high spectral and temporal resolution, high scanning speed, and lack of moving parts. However, industrial and field-deployable applications of such systems are limited due to a high-cost factor and intricacy in the experimental setups, which typically require a pair of locked femtosecond lasers. Here, we demonstrate a single oscillator which produces two mode-locked output beams with a stable repetition rate difference. We achieve this via inserting two 45°-cut birefringent crystals into the laser cavity, which introduces a repetition rate difference between the two polarization states of the cavity. To mode-lock both combs simultaneously, we use a semiconductor saturable absorber mirror (SESAM). We achieve two simultaneously operating combs at 1050 nm with 175-fs duration, 3.2-nJ pulses and an average power of 440 mW in each beam. The average repetition rate is 137 MHz, and we set the repetition rate difference to 1 kHz. This laser system, which is the first SESAM mode-locked femtosecond solid-state dual-comb source based on birefringent multiplexing, paves the way for portable and high-power femtosecond dual-combs with flexible repetition rate. To demonstrate the utility of the laser for applications, we perform asynchronous optical sampling (ASOPS) on semiconductor thin-film structures with the free-running laser system, revealing temporal dynamics from femtosecond to nanosecond time scales.