Development of an optical microfiber immunosensor for prostate specific antigen analysis using a high-order-diffraction long period grating

Sensing characteristics of structural microfiber long-period gratings

We present a detailed investigation into the sensing characteristics of a structural microfiber long-period grating (mLPG) sensor. By spirally winding a thinner microfiber to another thicker microfiber, periodic refractive index modulation is formed while the optical signal transmitted in the thicker microfiber is resonantly coupled out to the thinner microfiber, and then a 5-period four-port mLPG can be obtained with a device length of only ∼570 µm demonstrated a strong resonant dip of 25 dB. We studied the sensitivity characteristics of the four-port mLPG with surrounding strain, force, temperature and refractive index, and the obtained sensitivities were -6.4 pm/µɛ, -8418.6 nm/N, 7.62 pm/°C and 2122 nm/RIU, respectively. With the advantages of high refractive index sensitivity and wide wavelength tunable range, the four-port mLPG has great potential in applications such as tunable filters and biochemical sensor.

Advances in Tapered Optical Fiber Sensor Structures: From Conventional to Novel and Emerging

Optical fiber sensors based on tapered optical fiber (TOF) structure have attracted a considerable amount of attention from researchers due to the advantages of simple fabrication, high stability, and diverse structures, and have great potential for applications in many fields such as physics, chemistry, and biology. Compared with conventional optical fibers, TOF with their unique structural characteristics significantly improves the sensitivity and response speed of fiber-optic sensors and broadens the application range. This review presents an overview of the latest research status and characteristics of fiber-optic sensors and TOF sensors. Then, the working principle of TOF sensors, fabrication schemes of TOF structures, novel TOF structures in recent years, and the growing emerging application areas are described. Finally, the development trends and challenges of TOF sensors are prospected. The objective of this review is to convey novel perspectives and strategies for the performance optimization and design of TOF sensors based on fiber-optic sensing technologies.

Long-Period Fiber Grating Sensors for Chemical and Biomedical Applications

Optical fiber biosensors (OFBS) are being increasingly proposed due to their intrinsic advantages over conventional sensors, including their compactness, potential remote control and immunity to electromagnetic interference. This review systematically introduces the advances of OFBS based on long-period fiber gratings (LPFGs) for chemical and biomedical applications from the perspective of design and functionalization. The sensitivity of such a sensor can be enhanced by designing the device working at or near the dispersion turning point, or working around the mode transition, or their combination. In addition, several common functionalization methods are summarized in detail, such as the covalent immobilization of 3-aminopropyltriethoxysilane (APTES) silanization and graphene oxide (GO) functionalization, and the noncovalent immobilization of the layer-by-layer assembly method. Moreover, reflective LPFG-based sensors with different configurations have also been introduced. This work aims to provide a comprehensive understanding of LPFG-based biosensors and to suggest some future directions for exploration.

Post chemical etching of tapered seven-core fiber sensor for enhanced figure of merit

A post chemical etching process to a tapered seven-core fiber (TSCF) is proposed and experimentally demonstrated to effectively adjust the mode profiles of high-order supermodes, aimed to improve the figure of merit (FOM). The experimental results show that the FOM of an etched TSCF is as high as 1431.36 1/RIU, a 7.32-times enhancement compared with that of TSCF without etching, provided the TSCF has the same taper waist diameter of 19.20 µm. The proposed method opens a new, to the best of our knowledge, method for optimizing optical fiber sensor performance.

Recent advancements in optical biosensors for cancer detection

Optical biosensors are rapid, real-time, and portable, have a low detection limit and a high sensitivity, and have a great potential for diagnosing various types of cancer. Optical biosensors can detect cancer in a few million malignant cells, in comparison to conventional diagnosis techniques that use 1 billion cells in tumor tissue with a diameter of 7 nm-10 nm. Current cancer detection methods are also costly, inconvenient, complex, time consuming, and require technical specialists. This review focuses on recent advances in optical biosensors for early detection of cancer. It is primarily concerned with advancements in the design of various biosensors using resonance, scattering, chemiluminescence, luminescence, interference, fluorescence, absorbance or reflectance, and various fiber types. The development of various two-dimensional materials with optical properties such as biocompatibility, field enhancement, and a higher surface-to-volume ratio, as well as advancements in microfabrication technologies, have accelerated the development of optical sensors for early detection of cancer and other diseases. Surface enhanced Raman spectroscopy technology has the potential to detect a single molecule with high specificity, and terahertz waves are a recently explored technology for cancer detection. Due to the low electromagnetic interference, small size, multiplexing, and remote sensing capabilities of optical fiber-based platforms, they may be a driving force behind the rapid development of biosensors. The advantages and disadvantages of existing and future optical biosensor designs for cancer detection are discussed in detail. Additionally, a prospect for future advancements in the development of optical biosensors for point-of-care and clinical applications is highlighted.

Glutathione-functionalized long-period fiber gratings sensor based on surface plasmon resonance for detection of As3+ ions

Development of simple and accurate methods for the detection of As³⁺is highly desirable and technically important. In this work, a highly sensitive and selective long-period fiber gratings sensor based on surface plasmon resonance was developed for As³⁺detection by designing glutathione-functionalized Au nanoparticles as a signal amplification tag. Based on the chemical interaction between As³⁺and glutathione, the self-assembling glutathione on the surface of the gold film combines selectively with As³⁺, and then anchors the glutathione-functionalized Au nanoparticles, which changes the refractive index of the surrounding environment, resulting in a shift of the transmission spectrum. Results show that the sensor could detect As³⁺with concentrations ranging from 0.02 to 2 ppb. The sensor exhibited excellent specificity for As³⁺against other metal ions, such as Na⁺, Fe³⁺, Mg²⁺, Cu²⁺, Pb²⁺, Ni²⁺, Ba²⁺, and Co³⁺. The fiber sensor was successfully employed to detect As³⁺in pond water samples, demonstrating that it has the potential for As³⁺detection with the advantages of low cost, high sensitivity, and a simple structure.

Immunosensing Based on Optical Fiber Technology: Recent Advances

The evolution of optical fiber technology has revolutionized a variety of fields, from optical transmission to environmental monitoring and biomedicine, given their unique properties and versatility. For biosensing purposes, the light guided in the fiber core is exposed to the surrounding media where the analytes of interest are detected by different techniques, according to the optical fiber configuration and biofunctionalization strategy employed. These configurations differ in manufacturing complexity, cost and overall performance. The biofunctionalization strategies can be carried out directly on bare fibers or on coated fibers. The former relies on interactions between the evanescent wave (EW) of the fiber and the analyte of interest, whereas the latter can comprise plasmonic methods such as surface plasmon resonance (SPR) and localized SPR (LSPR), both originating from the interaction between light and metal surface electrons. This review presents the basics of optical fiber immunosensors for a broad audience as well as the more recent research trends on the topic. Several optical fiber configurations used for biosensing applications are highlighted, namely uncladded, U-shape, D-shape, tapered, end-face reflected, fiber gratings and special optical fibers, alongside practical application examples. Furthermore, EW, SPR, LSPR and biofunctionalization strategies, as well as the most recent advances and applications of immunosensors, are also covered. Finally, the main challenges and an outlook over the future direction of the field is presented.

3D printed long period gratings and their applications as high sensitivity shear-strain and torsion sensors

In this work we demonstrate the capability to measure shear-strain and torsion loads by bonding an optical fiber to a 3D printed periodic grooved plate. The device acts as a long period grating where the resonances show loss tunability ranging from ∼0 up to ∼20 dB, achieving sensitivities values for the dip transmission ratio as function of the load of 0.12 /mε and 0.21/deg, for shear-strain and torsion loads ranging from 0-∼8 mε and 1-∼4 deg, respectively. The low wavelength drift allowed us to operate the sensor through intensity demodulation techniques, showing good tracking performance of external stimuli.

Few-mode fiber-embedded long-period fiber grating for simultaneous measurement of refractive index and temperature

A few-mode fiber (FMF)-embedded long-period fiber grating is proposed as a sensor for simultaneous measurement of refractive index and temperature. Periodically embedding the FMFs induces the local refractive index modulation to achieve a compact sensor size and obtains a low insertion loss. The simulated results show that the two resonance dips have opposite waveguide dispersion coefficients. Therefore, they show different refractive indices and temperature sensitivities in the experiment. At the same time, the spectral characteristics of double-resonance dips provides a condition for simultaneous measurement of two parameters. By monitoring wavelength shift of the two dips, the simultaneous measurement of refractive index and temperature is easily realized.

Label-Free and Reproducible Chemical Sensor Using the Vertical-Fluid-Array Induced Optical Fiber Long Period Grating (VIOLIN)

Fiber optical refractometers have gained a substantial reputation in biological and chemical sensing domain regarding their label-free and remote-operation working mode. However, the practical breakthrough of the fiber optical bio/chemosensor is impeded by a lack of reconfigurability as well as the explicitness of the determination between bulk and surface refractive indices. In this letter, we further implement the highly flexible and reproducible long period grating called "VIOLIN" in chemical sensing area for the demonstration of moving those obstacles. In this configuration, the liquid is not only leveraged as the chemical carrier but also the periodic modulation of the optical fiber to facilitate the resonant signal. The thiol compound that is adsorbed by the fluidic substrate can be transduced to the pure alteration of the bulk refractive index of the liquid, which can be sensitively perceived by the resonant drift. Taking advantage of its freely dismantled feature, the VIOLIN sensor enables flexible reproduction and high throughput detection, yielding a new vision to the fiber optic biochemical sensing field.