High-sensitivity optical fiber temperature sensor based on a dual-loop optoelectronic oscillator with the Vernier effect

Long-range, high-precision optical calibration path based on an optoelectronic oscillator

We propose a laser ranging calibration optical path system using multiple optoelectronic oscillators (OEOs) that provides long range, high precision, low cost and high stability. A phase locked loop is used to control the length of the calibration optical path, which is measured with high precision by alternating the oscillations between the measurement loop and the reference loop. The calibration optical path length exceeds 9000 m with the stability of 6.8 µm during 3 minutes, and the relative measurement accuracy of the calibration optical path reaches 6.9 × 10-10.

High-precision micro-displacement sensing based on an optical filter and optoelectronic oscillators

High-precision micro-displacement sensing based on an optical filter and optoelectronic oscillators (OEOs) is proposed and experimentally demonstrated. In this scheme, an optical filter is utilized to separate the carriers of the measurement and reference OEO loops. Through the optical filter, the common path structure can be consequently achieved. The two OEO loops share all optical/electrical components, except for the micro-displacement to be measured. Measurement and reference OEOs are alternately oscillated by using a magneto-optic switch. Therefore, self-calibration is achieved without additional cavity length control circuits, greatly simplifying the system. A theoretical analysis of the system is developed, and this analysis is then demonstrated with experiments. Regarding the micro-displacement measurements, we achieved a sensitivity of 312.058 kHz/mm and a measurement resolution of 356 pm. The measurement precision is less than 130 nm over a measurement range of 19 mm.

A Review on Photonic Sensing Technologies: Status and Outlook

In contemporary science and technology, photonic sensors are essential. They may be made to be extremely resistant to some physical parameters while also being extremely sensitive to other physical variables. Most photonic sensors may be incorporated on chips and operate with CMOS technology, making them suitable for use as extremely sensitive, compact, and affordable sensors. Photonic sensors can detect electromagnetic (EM) wave changes and convert them into an electric signal due to the photoelectric effect. Depending on the requirements, scientists have found ways to develop photonic sensors based on several interesting platforms. In this work, we extensively review the most generally utilized photonic sensors for detecting vital environmental parameters and personal health care. These sensing systems include optical waveguides, optical fibers, plasmonics, metasurfaces, and photonic crystals. Various aspects of light are used to investigate the transmission or reflection spectra of photonic sensors. In general, resonant cavity or grating-based sensor configurations that work on wavelength interrogation methods are preferred, so these sensor types are mostly presented. We believe that this paper will provide insight into the novel types of available photonic sensors.

A Fiber Ring Laser Sensor with a Side Polished Evanescent Enhanced Fiber for Highly Sensitive Temperature Measurement

We demonstrate a highly sensitive and practical fiber-based temperature sensor system. The sensor is constructed based on a fiber ring laser (FRL) as well as a side-polished fiber filled with isopropanol. The laser cavity of the sensing part fiber is polished by the wheel fiber polishing system with residual thickness (RT) is selected to detect the temperature in the FRL. Thanks to the high thermo-optic coefficient of isopropanol, the sensitivity of the proposed temperature sensor could be effectively improved by filling isopropanol in the cost-less side polished single mode fiber. Refractive index (RI) of isopropanol changes with the surrounding temperature variation allowing high-sensitivity temperature sensing. Experimental results demonstrate that the side polished fiber can efficiently excite high-order cladding modes which enhance the modular interference increase the interaction between the evanescent wave and the isopropanol. Besides, the results show that the sensitivity can be as high as 2 nm/°C in the temperature range of 25–35 °C.