In situ measurements of the volume scattering function with LISST-VSF and LISST-200X in extreme environments: evaluation of instrument calibration and validity

Neural network approach for correction of multiple scattering errors in the LISST-VSF instrument

The LISST-VSF is a commercially developed instrument used to measure the volume scattering function (VSF) and attenuation coefficient in natural waters, which are important for remote sensing, environmental monitoring and underwater optical wireless communication. While the instrument has been shown to work well at relatively low particle concentration, previous studies have shown that the VSF obtained from the LISST-VSF instrument is heavily influenced by multiple scattering in turbid waters. High particle concentrations result in errors in the measured VSF, as well as the derived properties, such as the scattering coefficient and phase function, limiting the range at which the instrument can be used reliably. Here, we present a feedforward neural network approach for correcting this error, using only the measured VSF as input. The neural network is trained with a large dataset generated using Monte Carlo simulations of the LISST-VSF with scattering coefficients b=0.05-50m-1, and tested on VSFs from measurements with natural water samples. The results show that the neural network estimated VSF is very similar to the expected VSF without multiple scattering errors, both in angular shape and magnitude. One example showed that the error in the scattering coefficient was reduced from 103% to 5% for a benchtop measurement of natural water sample with expected b=10.6m-1. Hence, the neural network drastically reduces uncertainties in the VSF and derived properties resulting from measurements with the LISST-VSF in turbid waters.

Forward volume scattering function (0.03°-60°) measured using an oblique-incidence particle sizer

The forward volume scattering function (VSF) is an inherent optical property important in ocean lidar and underwater imaging and communication. The scattered power within 60° contains >90% of total scattered power, making it essential for determining the asymmetry parameter g. Thus, the new oblique-incidence-design Bettersize BT-3000 particle sizer was utilized to measure forward VSF (0.03°-60°) synchronously. A double-exponential model was then used to construct the full-angle-range VSF (0°-180°). The g value calculated therefrom had an uncertainty of <1%. Calibration was implemented using 11-µm beads alone, and the BT-3000's performance was validated.

Efficient Monte Carlo simulation reveals significant multiple scattering errors in underwater angular scattering measurements

Multiple scattering can severely affect the accuracy of optical instrumentation. Variance reduction methods have been implemented to improve a Monte Carlo model developed to simulate volume scattering functions measured by LISST-VSF instruments. The implemented methods can result in more than a tenfold increase in efficiency. The simulation is used to analyze multiple scattering errors for a range of Fournier-Forand (FF) phase functions. Our results demonstrate significant errors in the scattering coefficient, backscattering coefficient and phase function, where multiple scattering errors may only be considered negligible (<10%) for scattering coefficients <1 m^-1. The errors depend strongly on the scattering coefficient but also increase when phase functions become more forward-peaked.

Characterization of suspended particulate matter in contrasting coastal marine environments with angle-resolved polarized light scattering measurements

Optical proxies based on light scattering measurements have potential to improve the study and monitoring of aquatic environments. In this study, we evaluated several optical proxies for characterization of particle mass concentration, composition, and size distribution of suspended particulate matter from two contrasting coastal marine environments. We expanded upon our previous study of Southern California coastal waters, which generally contained high proportions of organic particles, by conducting angle-resolved polarized light scattering measurements in predominantly turbid and inorganic-particle dominated Arctic coastal waters near Prudhoe Bay, Alaska. We observed that the particulate backscattering coefficient b_bp was the most effective proxy for the mass concentration of suspended particulate matter (SPM) when compared with particulate scattering and attenuation coefficients b_p and c_p. Improvements were seen with b_bp as a proxy for the concentration of particulate organic carbon (POC), although only if particulate assemblages were previously classified in terms of particle composition. We found that the ratio of polarized-light scattering measurements at 110º and 18º was superior in performance as a proxy for the composition parameter POC/SPM in comparison to the particulate backscattering ratio b_bp/b_p. The maximum value of the degree of linear polarization DoLP_p,max observed within the range of scattering angles 89°-106° was found to provide a reasonably good proxy for a particle size parameter (i.e., 90th percentile of particle volume distribution) which characterizes the proportions of small- and large-sized particles. These findings can inform the development of polarized light scattering sensors to enhance the capabilities of autonomous platforms.

Optimized Classification of Suspended Particles in Seawater by Dense Sampling of Polarized Light Pulses

Suspended particles affect the state and vitality of the marine ecosystem. In situ probing and accurately classifying the suspended particles in seawater have an important impact on ecological research and environmental monitoring. Individual measurement of the optical polarization parameters scattered by the suspended particles has been proven to be a powerful tool to classify the particulate compositions in seawater. In previous works, the temporal polarized light pulses are sampled and averaged to evaluate the polarization parameters. In this paper, a method based on dense sampling of polarized light pulses is proposed and the experimental setup is built. The experimental results show that the dense sampling method optimizes the classification and increases the average accuracy by at least 16% than the average method. We demonstrate the feasibility of dense sampling method by classifying the multiple types of particles in mixed suspensions and show its excellent generalization ability by multi-classification of the particles. Additional analysis indicates that the dense sampling method basically takes advantage of the high-quality polarization parameters to optimize the classification performance. The above results suggest that the proposed dense sampling method has the potential to probe the suspended particles in seawater in red-tide early warning, as well as sediment and microplastics monitoring.

Analysis of multiple scattering errors in LISST-VSF volume scattering function measurements using Monte Carlo simulations and experimental data

A Monte Carlo algorithm has been developed to investigate the effects of multiple scattering on the volume scattering function measured by the LISST-VSF instrument. The developed algorithm is compared to experimental results obtained from bench-top measurements using 508nm spherical polystyrene beads and Arizona test dust as scattering agents. The Monte Carlo simulation predicts measured volume scattering functions at all concentrations. We demonstrate that multiple scattered light can be a major contributor to the detected signal, resulting in errors in the measured volume scattering function and its derived inherent optical properties. We find a relative error of 10% in the scattering coefficient for optical depths ∼0.4, and it can reach 100% at optical depths ∼2.