Continuous-wave operation of an electrically pumped single microribbon based Fabry-Perot microlaser

Electrically driven whispering-gallery-mode microlasers in an n-MgO@ZnO:Ga microwire/p-GaN heterojunction

In emerging miniaturized applications, semiconductor micro/nanostructures laser devices have drawn great public attentions of late years. The device performances of micro/nanostructured microlasers are highly restricted to the different reflective conditions at various side surfaces of microresonators and junction interface quality. In this study, an electrically driven whispering-gallery-mode (WGM) microlaser composed of a Ga-doped ZnO microwire covered by a MgO layer (MgO@ZnO:Ga MW) and a p-type GaN substrate is illustrated experimentally. Incorporating a MgO layer on the side surfaces of ZnO:Ga MWs can be used to reduce light leakage along the sharp edges and the ZnO:Ga/GaN interface. This buffer layer incorporation also enables engineering the energy band alignment of n-ZnO:Ga/p-GaN heterojunction and manipulating the current transport properties. The as-constructed n-MgO@ZnO:Ga MW/p-GaN heterojunction device can emit at an ultraviolet wavelength of 375.5 nm and a linewidth of about 25.5 nm, achieving the excitonic-related recombination in the ZnO:Ga MW. The broadband spectrum collapsed into a series of sharp peaks upon continuous-wave (CW) operation of electrical pumping, especially for operating current above 15.2 mA. The dominant emission line was centered at 378.5 nm, and the line width narrowed to approximately 0.95 nm. These sharp peaks emerged from the spontaneous emission spectrum and had an average spacing of approximately 5.5 nm, following the WGM cavity modes. The results highlight the significance of interfacial engineering for optimizing the performance of low-dimensional heterostructured devices and shed light on developing future miniaturized microlasers.

Electron-hole plasma Fabry-Perot lasing in a Ga-incorporated ZnO microbelt via Ag nanoparticle deposition

In this work, individual ZnO via Ga-doped (ZnO:Ga) microbelts with excellent crystallinity and smooth facets can enable the realization of lateral microresonator Fabry-Perot (F-P) microlasers, and the F-P lasing action originates from excitonic state. Interestingly, introducing Ag nanoparticles (AgNPs) deposited on the microbelt can increase F-P lasing characteristics containing a lower threshold and enhanced lasing output. Especially for the large size AgNPs (the diameter d is approximately 200 nm), the lasing features also exhibit a significant redshift of each lasing peak and an observable broadening of the spectral line width with an increase of the excitation fluence. And the remarkable lasing characteristics are belonging to the electron-hole plasma (EHP) luminescence. The behavior and dynamics of the stimulated radiation in an AgNPs@ZnO:Ga microbelt are studied, suggesting the Mott-transition from the excitonic state to EHP state that is responsible for the F-P lasing. These features can be attributed to the working mechanism that the hot electrons created by the large size AgNPs through nonradiative decay can fill the conduction band of nearby ZnO:Ga, leading to a downward shift of the conduction band edge. This novel filling influence can facilitate bandgap renormalization and result in EHP emission. The results provide a comprehensive understanding of the transition between excitonic and EHP states in the stimulated emission process. More importantly, it also can provide new scheme to developing high efficiency and ultra-low threshold microlasing diodes.

An electrically driven single microribbon based near-infrared exciton–polariton light-emitting diode

An electrically driven exciton–polariton NIR-LED involving an n-ZnO:Ga microribbon/p-GaAs heterojunction was achieved. The Rabi splitting is measured to be 109 meV.