1
|
Carlos Basilio-Ortiz J, Moreno I. All dielectric reflective metalens based on multilayer meta-atoms. OPTICS LETTERS 2023; 48:5647-5650. [PMID: 37910724 DOI: 10.1364/ol.505616] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/12/2023] [Accepted: 10/03/2023] [Indexed: 11/03/2023]
Abstract
While transmission-mode metalenses have been extensively studied, reflection-mode metalenses remain almost unexplored, presenting advantages in terms of improved efficiency and reduced complexity. In this Letter, we investigate a multilayer dielectric metalens operating in reflection mode at visible wavelengths without a metallic layer. Simulations and analysis demonstrate the performance of the metalens, with an 84% reflectivity the metalens proves its efficacy in reflection mode. At a numerical aperture of 0.15, the metalens achieves a 33% focusing efficiency, which is approximately twice that of similar reflective metalenses, facilitating efficient light manipulation and subwavelength resolution. Additionally, the metalens exhibits a well-defined focal spot with a full width at half maximum of 2.03 µm, approaching the diffraction limit.
Collapse
|
2
|
Chen K, Li Z, Sun X, Kang X, Wang G, Gao X. Free-space generation of three-dimensional tunable vector optical cages. JOURNAL OF THE OPTICAL SOCIETY OF AMERICA. A, OPTICS, IMAGE SCIENCE, AND VISION 2023; 40:1809-1816. [PMID: 37707018 DOI: 10.1364/josaa.496649] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/29/2023] [Accepted: 08/14/2023] [Indexed: 09/15/2023]
Abstract
The generation of three-dimensional tunable vector optical cages through full polarization modulation requires complex polarization states. This paper takes the vector Airy optical cage as an example to generate a three-dimensional tunable high-quality optical cage based on the Pancharatnam-Berry phase principle. The proposed method in this paper possesses the capability of arbitrary modulation in various aspects, including the quantity of optical cages and their respective sizes as well as three-dimensional spatial positions. Moreover, the intensity of each optical cage can be modulated independently. This research will improve the capture efficiency of optical tweezers and promote further development in fields of efficient optical trapping, particle manipulation, high-resolution microscopic manipulation, and optical communication.
Collapse
|
3
|
Zhang G, Liu J, Dong D, Chen C, Liu Y, Fu Y. Controlling the directional excitation of surface plasmon polaritons using tunable non-Hermitian metasurfaces. OPTICS LETTERS 2023; 48:4296-4299. [PMID: 37582016 DOI: 10.1364/ol.499760] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/04/2023] [Accepted: 07/26/2023] [Indexed: 08/17/2023]
Abstract
In this work, we propose an efficient approach to controlling the directional excitation of surface plasmon polaritons (SPPs) by dynamically modulating the real-part perturbation in a passive parity-time symmetric metasurface. This non-Hermitian system can experience two exceptional points that can induce two unidirectional excitation states of SPPs along opposite directions. Empowered by its superior modulation depth, the energy ratio and energy intensities of two excited SPP states can be effectively manipulated by this non-Hermitian metasurface. To demonstrate these findings, we design and numerically verify non-Hermitian metasurfaces integrated with an Sb2Se3 phase-change material. Our work provides a promising platform for the controllable engineering of SPP excitations, holding significant potential for the development of new plasmonic devices, including on-chip SPP sources, routers and sorters, and integrated optical circuits.
Collapse
|
4
|
Wang M, Lee JS, Aggarwal S, Farmakidis N, He Y, Cheng T, Bhaskaran H. Varifocal Metalens Using Tunable and Ultralow-loss Dielectrics. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2023; 10:e2204899. [PMID: 36596668 PMCID: PMC9951390 DOI: 10.1002/advs.202204899] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/30/2022] [Revised: 12/07/2022] [Indexed: 05/25/2023]
Abstract
The field of flat optics that uses nanostructured, so-called metasurfaces, has seen remarkable progress over the last decade. Chalcogenide phase-change materials (PCMs) offer a promising platform for realizing reconfigurable metasurfaces, as their optical properties can be reversibly tuned. Yet, demonstrations of phase-change metalenses to date have employed material compositions such as Ge2 Sb2 Te5 , which show high absorption in the visible to near-IR wavelengths particularly in their crystalline state, limiting the applicability. Here, by using a low-loss PCM Sb2 Se3 , for the first time, active polarization-insensitive phase-change metalenses at near-IR wavelengths with comparable efficiencies in both material states are shown. An active metalens with a tunable focusing intensity of 95% and a focusing efficiency of 23% is demonstrated. A varifocal metalens is then demonstrated with a tunable focal length from 41 to 123 µm with comparable focusing efficiency (5.7% and 3%). The ultralow-loss nature of the material introduces exciting new possibilities for optical communications, multi-depth imaging, beam steering, optical routing, and holography.
Collapse
Affiliation(s)
- Mengyun Wang
- Department of MaterialsUniversity of OxfordOxfordOX1 3PHUK
| | - June Sang Lee
- Department of MaterialsUniversity of OxfordOxfordOX1 3PHUK
| | | | | | - Yuhan He
- Department of MaterialsUniversity of OxfordOxfordOX1 3PHUK
| | | | | |
Collapse
|
5
|
Yang Y, Zhu Y, Xie W, Bu L, Zang Y, Liu X. High-efficiency ultrathin metasurfaces with simultaneous control of complete phase, amplitude, and polarization. OPTICS EXPRESS 2023; 31:3134-3142. [PMID: 36785311 DOI: 10.1364/oe.470556] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/14/2022] [Accepted: 08/11/2022] [Indexed: 06/18/2023]
Abstract
Metasurfaces that can simultaneously manipulate both amplitude and phase have garnered interest and have promising applications owing to their strong beam-steering ability; however, achieving a high maximum transmission while covering the full phase shift remains challenging. This paper proposes a chiral-structured meta-atom composed of two external cross-polarized patches and an internal coupling structure. It enables the independent modulation of the phase, amplitude, and polarization at large incidence angles and ensures a high maximum transmission with a complete phase shift enabled by the two internal rotation structures. The transmission phase and amplitude can be independently controlled by adjusting the geometry and rotation angle of the meta-atoms. The performance and feasibility of the method were verified using an ultra-thin high-order Bessel beam generator sample with a thickness of 2 mm (about λ0/11 at 14 GHz). This design can meet arbitrary requirements for extreme beam steering and has broad application prospects in the fields of electromagnetism and photonics.
Collapse
|
6
|
Wu G, Si L, Xu H, Niu R, Zhuang Y, Sun H, Ding J. Phase-to-pattern inverse design for a fast realization of a functional metasurface by combining a deep neural network and a genetic algorithm. OPTICS EXPRESS 2022; 30:45612-45623. [PMID: 36522964 DOI: 10.1364/oe.478084] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/13/2022] [Accepted: 11/04/2022] [Indexed: 06/17/2023]
Abstract
Metasurface provides an unprecedented means to manipulate electromagnetic waves within a two-dimensional planar structure. Traditionally, the design of meta-atom follows the pattern-to-phase paradigm, which requires a time-consuming brute-forcing process. In this work, we present a fast inverse meta-atom design method for the phase-to-pattern mapping by combining the deep neural network (DNN) and genetic algorithm (GA). The trained classification DNN with an accuracy of 92% controls the population generated by the GA within an arbitrary preset small phase range, which could greatly enhance the optimization efficiency with less iterations and a higher accuracy. As proof-of-concept demonstrations, two reflective functional metasurfaces including an orbital angular momentum generator and a metalens have been numerically investigated. The simulated results agree very well with the design goals. In addition, the metalens is also experimentally validated. The proposed method could pave a new avenue for the fast design of the meta-atoms and functional meta-devices.
Collapse
|
7
|
Su Y, Liu D, Zhang M. Sb 2Se 3-assisted reconfigurable broadband Y-junction. OPTICS EXPRESS 2022; 30:40379-40388. [PMID: 36298972 DOI: 10.1364/oe.473157] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/12/2022] [Accepted: 10/06/2022] [Indexed: 06/16/2023]
Abstract
A Y-junction is commonly used in on-chip systems because of its excellent broadband characteristic. However, due to the lack of regulation methods, in most cases Y-junctions are used as passive components. In this work we propose a reconfigurable broadband Y-junction based on phase change material. When Sb2Se3 layers on two branches are at different states, the Y-junction is asymmetric and works as a reconfigurable dual-mode (de)multiplexer. When both Sb2Se3 layers are amorphous, the Y-junction is symmetric and works as a dual-mode 3-dB power splitter. To achieve quasi-adiabatic evolution for both states in a short device length, we propose a segmented fast quasi-adiabatic method. By dividing the gap region into multiple segments and optimizing the geometry and length of each segment, the proposed device achieves bandwidth > 100 nm (crosstalk < -20 dB) in a compact footprint of 19.3 × 3 µm2. The simulation result shows that at center wavelength of 1550 nm, the crosstalk and insertion loss of our device are < -41 dB and <0.12 dB, respectively, under asymmetric mode (de)multiplex state, and the excess loss is within 0.06 dB under symmetric power splitting state. The proposed device may contribute to the realization of a high-bandwidth, flexible mode-division-multiplexing network.
Collapse
|
8
|
Lv S, Wang R, Luo W, Bai Y, Meng F. Multifunctional tunable visible light metalens based on double-layer barium titanate. APPLIED OPTICS 2022; 61:5121-5127. [PMID: 36256190 DOI: 10.1364/ao.458517] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/15/2022] [Accepted: 05/19/2022] [Indexed: 06/16/2023]
Abstract
A tunable metalens plays an indispensable role in the development of integrated optics, multi-imaging systems, etc. We propose a multifunctional tunable metalens that combines a double-layer barium titanate (BTO) structure and geometric phase in the visible light band. The refractive indices of the upper and lower layer BTO nanorods can be tuned continuously and independently by applying external voltage (0-60 V), and the lower layer can be converted between a full-wave plate and normal scattering unit, while the scatterers of the upper layer can be switched between a half-wave plate and full-wave plate. The voltages of the upper and lower layers can be adjusted to achieve different functions such as optical switches, conversion between monofocal and bifocal metalenses, adjustment of bifocal intensity, and broadband focusing (585-690 nm). Simulation results show that the multifunctional tunable metalens has a good focusing effect. A metalens with high focusing efficiency, dynamic reconfigurability, and a switching function has tremendous application potential in the fields of multifunctional devices, biomedicine, optical communication, imaging, and so on.
Collapse
|
9
|
Wang M, Cheng Y, Wu L. Ultra-broadband high-efficiency circular polarization conversion and terahertz wavefront manipulation based on an all-metallic reflective metasurface. APPLIED OPTICS 2022; 61:4833-4842. [PMID: 36255967 DOI: 10.1364/ao.454099] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/18/2022] [Accepted: 04/22/2022] [Indexed: 06/16/2023]
Abstract
In this paper, an all-metal metasurface (MS), which can achieve high-efficient reflective circular-polarization conversion and multifunctional terahertz (THz) wavefront manipulation in an ultra-broadband frequency range, is proposed and investigated theoretically. The proposed all-metal MS consists of the periodic array of a gold vertical-split-ring (VSR) structure adhered on gold substrate. Numerical simulation results indicate that the proposed MS structure can convert the incident circular-polarization (CP) wave into its orthogonal component after reflection with a conversion coefficient over 95% from 0.8 to 1.65 THz (relative bandwidth of 68.3%). The full 2π phase shift of the proposed MS in this frequency range can be obtained by changing the rotation angle of the VSR structure along the wave propagation direction. As proof of concept for the multifunctional wavefront manipulation, anomalous reflection, reflective planar focusing, and vortex beam generation are numerically demonstrated based on the Pancharatnam-Berry (PB) phase principle. Our work can provide an effective method of enhancing the performance of reflective-type all-metal MS and show endless potential in wavefront manipulation and communication applications in THz and even optical region.
Collapse
|
10
|
Wang Y, Chen L, Tang S, Xu P, Ding F, Fang Z, Majumdar A. Helicity-dependent continuous varifocal metalens based on bilayer dielectric metasurfaces. OPTICS EXPRESS 2021; 29:39461-39472. [PMID: 34809310 DOI: 10.1364/oe.445344] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/07/2021] [Accepted: 10/30/2021] [Indexed: 06/13/2023]
Abstract
Metasurfaces offer a unique platform to realize flat lenses, reducing the size and complexity of imaging systems and thus enabling new imaging modalities. In this paper, we designed a bilayer helicity-dependent continuous varifocal dielectric metalens in the near-infrared range. The first layer consists of silicon nanopillars and functions as a half-wave plate, providing the helicity-dependent metasurface by combining propagation phase and geometric phase. The second layer consists of phase-change material Sb2S3 nanopillars and provides tunable propagation phases. Upon excitation with the circularly polarized waves possessing different helicities, the metalens can generate helicity-dependent longitudinal focal spots. Under the excitation of linear polarized light, the helicity-dependent dual foci are generated. The focal lengths in this metalens can be continuously tuned by the crystallization fraction of Sb2S3. The zoom range is achieved from 32.5 µm to 37.2 µm for right circularly polarized waves and from 50.5 µm to 60.9 µm for left circularly polarized waves. The simulated focusing efficiencies are above 75% and 87% for the circularly and linearly polarized waves, respectively. The proposed metalens has potential applications in miniaturized devices, including compact optical communication systems, imaging, and medical devices.
Collapse
|
11
|
Wang C, Sun Y, Zhang Q, Yu Z, Tao C, Zhang J, Wu F, Wu R, Zheng Z. Continuous-zoom bifocal metalens by mutual motion of cascaded bilayer metasurfaces in the visible. OPTICS EXPRESS 2021; 29:26569-26585. [PMID: 34615089 DOI: 10.1364/oe.432183] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/25/2021] [Accepted: 07/14/2021] [Indexed: 06/13/2023]
Abstract
Metalens, a subcategory of metasurfaces, has been widely investigated by virtue of its miniature and ultrathin characteristics as well as versatile functionalities. In this study, a tunable bifocal metalens with two continuous-zoom foci is proposed and numerically verified. This design utilizes two cascaded layers of metasurfaces, and different phase profiles for incidences of opposite helicities are imparted on each layer by the combination of geometric phase and propagation phase. When two layers of metasurfaces are actuated laterally, focal lengths of both foci are tuned continuously, with the difference of both focal lengths increasing or decreasing. Additionally, the zoom range for each focus can be designed at will, and the relative intensity of both foci can be modulated by altering the ellipticity of incidence, with the focusing efficiency of the bifocal metalens varying from 19.8% to 32.7% for numerical apertures in a range from 0.53 to 0.78. The proposed device is anticipated to find applications in multi-plane imaging, optical tomography technique, optical data storage, and so on.
Collapse
|
12
|
Chen L, Hao Y, Zhao L, Wu R, Liu Y, Wei Z, Xu N, Li Z, Liu H. Multifunctional metalens generation using bilayer all-dielectric metasurfaces: erratum. OPTICS EXPRESS 2021; 29:18304. [PMID: 34154088 DOI: 10.1364/oe.431809] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/21/2021] [Indexed: 06/13/2023]
Abstract
We provide corrected equations for our previous publication [Opt. Express29, 9332(2021)10.1364/OE.420003].
Collapse
|