Freeform based hYperspectral imager for MOisture Sensing (FYMOS)

Integrated fiber optic spectrally resolved downwelling irradiance sensor for pushbroom spectrometers

We present an integrated fiber optic spectrally resolved downwelling irradiance sensor for pushbroom hyperspectral imagers. The system comprises of a cosine corrector and custom fiber patch cables, collecting the ambient light in a large solid angle and feeding it directly to the entrance slit of the spectrometer. The system enables simultaneous measurement of downwelling and upwelling irradiance using the main hyperspectral camera sensor. As a demonstration, the spectral reflectance of a soil sample was measured with a RMSE of 8.4%, a significant improvement on the RMSE of 54% found without correction. At a weight of approximately 10 grams, this system provides a substantial weight saving over standalone incident light sensing instruments.

Progress in the Preparation and Characterization of Convex Blazed Gratings for Hyper-Spectral Imaging Spectrometer: A Review

Convex blazed gratings, which can effectively broaden the spectral range and improve spectral resolution, have gradually evolved into a crucial optical component for lightweight and compact imaging spectroscopy instruments. Their design, processing, and testing involve multidisciplinary interdisciplinary scientific issues, and they continue to be a major area of research in imaging optics applications. This paper summarizes the effects of various grating groove shapes and structural parameters on the spectral range and diffraction efficiency of convex blazed gratings, after providing a brief introduction to the typical functions and applications of convex blazed gratings. Firstly, the latest progress in typical processing methods for convex blazed gratings is reviewed. It focuses on the current fabrication processes and reviews their capabilities in creating convex blazed gratings from three main types of technologies, namely ultra-precision machining, high-energy density beam processing, and chemically assisted fabrication processes. Secondly, the adaptability of the manufacturing process for convex blazed gratings on different scales is summarized, analyzing the adaptation of current procedures to various grating fabrication scales and their bottlenecks. Finally, the characterization methods and future feasible characterization methods for convex blazed gratings are reviewed. The development trend of efficient and precise preparation of convex blazed gratings is pointed out.

Spectral index selection method for remote moisture sensing under challenging illumination conditions

Remote sensing using passive solar illumination in the Short-Wave Infrared spectrum is exposed to strong intensity variation in the spectral bands due to atmospheric changing conditions and spectral absorption. More robust spectral analysis methods, insensitive to these effects, are increasingly required to improve the accuracy of the data analysis in the field and extend the use of the system to “non ideal” illumination condition. A computational hyperspectral image analysis method (named HIAM) for deriving optimal reflectance indices for use in remote sensing of soil moisture content is detailed and demonstrated. Using histogram analysis of hyperspectral images of wet and dry soil, contrast ratios and wavelength pairings were tested to find a suitable spectral index to recover soil moisture content. Measurements of local soil samples under laboratory and field conditions have been used to demonstrate the robustness of the index to varying lighting conditions, while publicly available databases have been used to test across a selection of soil classes. In both cases, the moisture was recovered with RMS error better than 5%. As the method is independent of material type, this method has the potential to also be applied across a variety of biological and man-made samples.

Ultra-Precision Cutting and Characterization of Reflective Convex Spherical Blazed Grating Elements

In this work, based on the diffraction principle of reflective blazed grating, the structure size of the convex spherical blazed grating unit is determined, the machining accuracy of the convex spherical blazed grating is formulated, the effects of tool nose radius and Poisson burr on the diffraction efficiency of the convex spherical blazed grating are analyzed, and the performances of cutting convex gratings with microcrystalline aluminum RSA6061 and RSA6061+ chemically plated NiP for two workpiece materials are compared. A convex spherical blazed grating with a radius of curvature R = 41.104 mm, substrate diameter 14 mm, grating density 53.97 line/mm, and blaze angle of roughly 3.8° is turned by a four-axis ultra-precision machining system by adjustment of the cutting tool, workpiece material, and cutting parameters, as well as modification of the layouts of the blazed grating on the convex sphere. The results of the testing of convex spherical blazed grating elements in both layouts show that the size error of the grating period is close for both layouts, the size error of grating height is smaller in the equal-along-arc layout, the blaze angle error in the equal-along-projection layout is only 0.74%, and the average roughness of the blazed surface is less than 5 nm to meet the processing quality requirements of the reflective convex spherical blazed grating. The greater the blaze angle accuracy of the blazed grating, the higher its diffraction efficiency, so the grating element with an equal-along-projection layout has a higher diffraction efficiency than the grating element with an equal-along-arc layout. RSA6061+ chemically plated NiP material is superior to RSA6061 material in Poisson burr height and blazed surface roughness, which is more suitable for Offner-type imaging spectrometers in the spectral range 0.95–2.5 μm (SWIR).

High spectral resolution compact Offner spectrometer based on the aberration-reduced convex holographic gratings recorded by spherical waves under Rowland circle mounting

High spectral resolution, excellent imaging quality, and compact configuration have become a recent trend in push-broom imaging spectrometers. The concentric Offner imaging spectrometer has become popular due to its high optical performance and compactness. However, astigmatism is the dominant residual aberration in the Offner imaging spectrometer, which makes the meridional and sagittal images unable to be focused well and causes a deterioration in image quality and spectral resolution. In this paper, we present a compact Offner imaging spectrometer with a high resolution based on an aberration-reduced convex holographic grating (ACHG), which is recorded by spherical waves under Rowland circle mounting. The holographic aberration coefficients of ACHG and geometric aberration coefficients of the Offner imaging spectrometer are derived based on the analysis of the light-path function. Furthermore, we analyzed the relationship between holographic aberration coefficients and holographic recording parameters of ACHG under Rowland circle mounting. To balance the geometric aberration of the Offner imaging spectrometer, proper holographic aberration coefficients of the ACHG are achieved through adjusting the holographic recording parameters. The design result indicated that the Offner imaging spectrometer with ACHG provides better images than those with mechanically ruled convex grating (MRCG). Moreover, the spectral resolution is significantly improved. This lays down a theoretical basis for subsequent construction work in the Offner imaging spectrometer with holographic aberration-reduced gratings.

Freeform hyperspectral imager design in a CubeSat format

A freeform pushbroom hyperspectral imager design was investigated as a combination of a freeform reflective triplet imager and a freeform reflective triplet spectrometer used in double-pass. The design operates at about F/2 with a 15-degree cross-track field-of-view and a 30 mm entrance pupil diameter. The design process led to achieving a small volume of less than 2 liters that fits comfortably within a 3U CubeSat geometry, exemplifying the compactness of this hyperspectral imager. We report the freeform sag departures and maximum slopes of the freeform surfaces, as well as the manufacturing tolerances together with an evaluation of the system stray light, all of which highlight the feasibility of a design in this class to be manufactured. This design uniquely positions itself on the landscape of compact hyperspectral imagers.