Electrically tunable absorber based on a graphene integrated lithium niobate resonant metasurface

High Q lithium niobate metasurfaces with transparent electrodes for efficient amplitude and phase modulation

Lithium niobate (LN)-based metasurfaces have demonstrated remarkable potential in integrated electro-optically adjustable metadevices with the maturation of thin film LN on insulator (LNOI) technology. Here, we proposed a type of high Q factor tunable metasurface with etchless LN, which is electrically driven in the vertical direction by using transparent conductive film. A transmission amplitude modulation of over 60 dB at a voltage of 20 V is realized through guided mode resonances created at the LN layer with a Q factor of 1320. Meanwhile, phase modulation is also realized with a reflective design by adding a gold layer at the bottom of the metasurface. With a gate voltage of 80 V, about 1.75π phase modulation is achieved while keeping reflection over 92%. Our proposed device achieves effective modulation of optical amplitude and phase in the near-infrared band, which lays a good foundation for the development of high performance LN-based active nanophotonic devices.

High-speed tunable optical absorber based on a coupled photonic crystal slab and monolayer graphene structure

Reconfigurable metasurfaces have been pursued intensively in recent years for the ability to modulate the light after fabrication. However, the optical performances of these devices are limited by the efficiency, actuation response speed and mechanical control for reconfigurability. In this paper, we propose a fast tunable optical absorber based on the critical coupling of resonance mode to absorptive medium and the plasma dispersion effect of free carriers in semiconductor. The tunable absorber structure includes a single-layer or bi-layer silicon photonic crystal slab (PCS) to induce a high-Q optical resonance, a monolayer graphene as the absorption material, and bottom reflector to remove transmission. By modulating the refractive index of PCS via the plasma dispersion of the free carrier, the critical coupling condition is shifted in spectrum, and the device acquires tuning capability between perfect absorption and total reflection of the incident monochromatic light beam. Simulation results show that, with silicon index change of 0.015, the tunable absorption of light can achieve the reflection/absorption switching, and full range of reflection phase control is feasible in the over coupling region. The proposed reconfigurable structure has potential applications in remote sensing, free-space communications, LiDAR, and imaging.

Hybrid resonance metasurface for a lithium niobate electro-optical modulator

Electrically tunable metasurfaces can realize two-dimensional pixelated spatial light modulation and have a wide range of applications in optical switching, free-space communication, high-speed imaging, and so on, arousing the interest of researchers. Here, a gold nanodisk metasurface on a lithium-niobate-on-insulator (LNOI) substrate is fabricated and experimentally demonstrated as an electrically tunable optical metasurface for transmissive free-space light modulation. Using the hybrid resonance formed by the localized surface plasmon resonance (LSPR) of gold nanodisks and the Fabry-Perot (FP) resonance, the incident light is trapped in the gold nanodisk edges and a thin lithium niobate layer to realize field enhancement. In this way, an extinction ratio of 40% is achieved at the resonance wavelength. In addition, the proportion of hybrid resonance components can be adjusted by the size of the gold nanodisks. By applying a driving voltage of ± 2.8 V, a dynamic modulation of 135 MHz is achieved at resonant wavelength. The highest signal-to-noise ratio (SNR) is up to 48 dB at 75 MHz. This work paves the way for the realization of spatial light modulators based on CMOS-compatible LiNbO₃ planar optics, which can be used in lidar, tunable displays, and so on.

Switchable multi-functional broadband polarization converter in terahertz band

In this work, we propose a multi-functional broadband terahertz polarization converter based on graphene-VO₂ hybrid metamaterial, which can switch between transmissive linear-to-linear conversion and reflective linear-to-circular conversion. The function of the metamaterial can be controlled by both the temperature and the Fermi energy of the graphene. At 298K, the metamaterial converts the y-polarized wave into x-polarized wave in 0.39-1.22THz. In the meanwhile, changing the Fermi energy of graphene, the converted polarization angle can be tuned from 90° to 45°. Increasing the temperature to 358K, the incident linearly polarized wave is reflected into circularly polarized wave. On this condition, tuning the Fermi energy, the metamaterial can separately convert the linear polarization wave into left-circularly polarized wave in 1.57-2.74THz and right-circularly polarized wave in 1.13-1.59THz. Such a switchable multi-functional broadband polarization converter may achieve potential applications in compact terahertz devices and integrated terahertz circuits.

Electro-optic metasurfaces

We numerically study metasurfaces that incorporate electro-optic materials and show that they can achieve large amplitude and phase modulations across a distance that is a fraction of the operation wavelength. We show that the metasurfaces made of dielectric discs placed on a film of lithium niobate can exhibit three main types of resonances, associated with the Fabry-Perot modes in the structure, guided modes of the film and Mie modes of the disks. We compare metasurface performance in these different regimes for achieving largest electro-optic modulation and find that in the proposed geometry the strongest amplitude modulation can be achieved through excitation and re-emission of the guided modes in the substrate. We further show that to achieve larger 70 degrees phase modulation while maintaining high transmission, we need to utilise more complex metasurfaces that have at least two resonators per unit cell.

Ultra-broadband and completely modulated absorption enhancement of monolayer graphene in a near-infrared region

Achieving ultra-broadband and completely modulated absorption enhancement of monolayer graphene in near-infrared region is practically important to design graphene-based optoelectronic devices, however, which remains a challenge. In this work, by spectrally designing multiple magnetic plasmon resonance modes in metamaterials to be adjacent to each other, near-infrared light absorption in monolayer graphene is greatly improved to have an averaged absorption efficiency exceeding 50% in a very broad absorption bandwidth of about 800 nm. Moreover, by exerting an external bias voltage on graphene to change Fermi energy of graphene, the ultra-broadband absorption enhancement of monolayer graphene exhibits an excellent tunability, which has a nearly 100% modulation depth and an electrical switching property. This work is promising for applications in near-infrared photodetectors, amplitude modulators of electromagnetic waves, etc.

On-Chip Optical Beam Manipulation with an Electrically Tunable Lithium-Niobate-on-Insulator Metasurface

Photonic integrated circuits (PICs) have garnered increasing attention because of their high efficiency in information processing. Recently, lithium niobate on insulator (LNOI) has become a new platform for PICs with excellent properties. Several tunable devices such as on-chip tunable devices that utilize the electric-optic effect of LN have been reported. However, an on-chip electrically tunable beam modulator that can focus or deflect the wave has not yet been developed. In this study, we designed an electrically tunable LNOI metasurface for on-chip optical beam manipulation. With a carefully designed local phase profile, we realized the tunable focusing and reflection functions on the chip. As the bias voltage varies, the focusing length can be shifted up to 19.9 μm (~13λ), whereas the focusing efficiency remains greater than 72%. A continuously tunable deflection can also be achieved efficiently within a range of 0–45°. The beam modulator enhances the ability to manipulate light on LNOI chips, which is expected to promote the development of integrated on-chip photonics.