Actively tunable multi-band terahertz perfect absorber due to the hybrid strong coupling in the multilayer structure

Polarization-independent and reciprocity-unbroken multifunctional device with composite symmetrical structure

A design method for a dynamically tunable multifunctional device, which is insensitive to polarization while maintaining unbroken reciprocity, is proposed. The device utilizes a multilayer composite symmetrical structure incorporating vanadium dioxide (VO₂). This design enables dynamic switching among the functions of linear polarization conversion, filtering, and absorption. In the polarization conversion state, the device achieves orthogonal deflection of incident waves at any polarization angle, with a polarization conversion ratio (PCR) exceeding 95%. When switched to the filtering function, a band-stop filter with a -20 dB bandwidth of 0.56 THz is obtained. In the absorption function, the device exhibits a peak absorption efficiency of up to 99%. Furthermore, the paper discusses the potential for a dual-band device based on the proposed structure. The device maintains reciprocity in all functions and effectively handles incident waves from both positive and negative directions. This adaptability and flexibility make it suitable for various applications, including switches, sensors, and modulators.

Strong coupling of multiple optical interface modes with ultra-narrow linewidth in one-dimensional topological photonic heterostructures

Coherent coupling of optical modes with a high Q-factor underpins realization of efficient light-matter interaction with multi-channels in resonant nanostructures. Here we theoretically studied the strong longitudinal coupling of three topological photonic states (TPSs) in a one-dimensional topological photonic crystal heterostructure embedded with a graphene monolayer in the visible frequencies. It is found that the three TPSs can strongly interplay with one another in the longitudinal direction, enabling a large Rabi splitting (∼ 48 meV) in spectral response. The triple-band perfect absorption and selective longitudinal field confinement have been demonstrated, where the linewidth of hybrid modes can reach 0.2 nm with Q-factor up to 2.6 × 10³. Mode hybridization of dual- and triple-TPSs were investigated by calculation of the field profiles and Hopfield coefficients of the hybrid modes. Moreover, simulation results further show that resonant frequencies of the three hybrid TPSs can be actively controlled by simply changing the incident angle or structural parameters, which are nearly polarization independent in this strong coupling system. With the multichannel, narrow-band light trapping and selectively strong field localization in this simple multilayer regime, one can envision new possibilities for developing the practical topological photonic devices for on-chip optical detection, sensing, filtering, and light-emitting.

Tunable wideband-narrowband switchable absorber based on vanadium dioxide and graphene

A functionally tunable and absorption-tunable terahertz (THz) metamaterial absorber based on vanadium dioxide (VO₂) and graphene is proposed and verified numerically. Based on phase transition properties of VO₂ and tunability of graphene, the switching performance between ultra-broadband and narrow-band near-perfect absorption can be achieved. We simulate and analyze the characteristics of the constructed model by finite element analysis. Theoretical calculations show that when VO₂ is in the metallic state and the graphene Fermi energy is 0 eV, the designed absorber can perform ultra-broadband absorption. The absorber achieves greater than 95% absorption in the 2.85 - 10THz range. When VO₂ is in the insulating state and the graphene Fermi energy is 0.7 eV, more than 99.5% absorption can be achieved at 2.3 THz. The absorption rate can be tuned by changing the conductivity of VO₂ and the Fermi energy of graphene. Moreover, the proposed absorber displays good polarization insensitivity and wide incident angle stability. The design may have potential applications in terahertz imaging, sensing, electromagnetic shielding and so on.

Switchable Multifunctional Terahertz Metamaterials Based on the Phase-Transition Properties of Vanadium Dioxide

Currently, terahertz metamaterials are studied in many fields, but it is a major challenge for a metamaterial structure to perform multiple functions. This paper proposes and studies a switchable multifunctional multilayer terahertz metamaterial. Using the phase-transition properties of vanadium dioxide (VO2), metamaterials can be controlled to switch transmission and reflection. Transmissive metamaterials can produce an electromagnetically induced transparency-like (EIT-like) effect that can be turned on or off according to different polarization angles. The reflective metamaterial is divided into I-side and II-side by the middle continuous VO2 layer. The I-side metamaterials can realize linear-to-circular polarization conversion from 0.444 to 0.751 THz when the incident angle of the y-polarized wave is less than 30°. The II-side metamaterials can realize linear-to-linear polarization conversion from 0.668 to 0.942 THz when the incident angle of the y-polarized wave is less than 25°. Various functions can be switched freely by changing the conductivity of VO2 and the incident surface. This enables metamaterials to be used as highly sensitive sensors, optical switches, and polarization converters, which provides a new strategy for the design of composite functional metamaterials.

Thermal tuning of terahertz metamaterial absorber properties based on VO2

We present a novel, structurally simple, multifunctional broadband absorber. It consists of a patterned vanadium dioxide film and a metal plate spaced by a dielectric layer. Temperature control allows flexible adjustment of the absorption intensity from 0 to 0.999. The modulation mechanism of the absorber stems from the thermogenic phase change properties of the vanadium dioxide material. The absorber achieves total reflection properties in the terahertz band when the vanadium dioxide is in the insulated state. When the vanadium dioxide is in its metallic state, the absorber achieves near-perfect absorption in the ultra-broadband range of 3.7 THz-9.7 THz. Impedance matching theory and the analysis of electric field are also used to illustrate the mechanism of operation. Compared to previous reports, our structure utilizes just a single cell structure (3 layers only), and it is easy to process and manufacture. The absorption rate and operating bandwidth of the absorber are also optimised. In addition, the absorber is not only insensitive to polarization, but also very tolerant to the angle of incidence. Such a design would have great potential in wide-ranging applications, including photochemical energy harvesting, stealth devices, thermal emitters, etc.