High-power tandem-pumped fiber amplifier with beam quality maintenance enabled by the confined-doped fiber

Selection principle of seed power in high-power narrow linewidth fiber amplifier seeded by a FBGs-based fiber oscillator

Here, we have experimentally demonstrated the selection principle of the seed power in a narrow linewidth fiber amplifier seeded by fiber oscillator based on a pair of fiber Bragg gratings. During the study on the selection of seed power, the spectral instability of the amplifier is found when a low power seed with bad temporal characteristics is amplified. This phenomenon is thoroughly analyzed from seed itself and the influence of the amplifier. Increasing the seed power or isolating the backward light of amplifier could effectively eliminate the spectral instability. Based on this point, we optimize the seed power and utilize a band pass filter circulator to isolate the backward light and filter the Raman noise. Finally, a 4.2 kW narrow linewidth output power is achieved with signal to noise ratio of 35 dB, which has exceeded the value under the highest output power reported in this type of narrow linewidth fiber amplifiers. This work provides a solution for high power and high signal to noise ratio narrow-linewidth fiber amplifiers seeded by FBGs-based fiber oscillator.

Confined-doped active fiber enabled all-fiber high-power single-frequency laser

In this paper, we investigate the performances of an in-house fabricated confined-doped active fiber in the applications of all-fiber high-power single-frequency amplifiers. A 210-W single-frequency single-mode fiber laser is obtained directly, which confirms the excellent performance of the confined-doped active fiber for high-power single-mode operation. To further demonstrate the power scalability of the fiber amplifier, the strategy of applying a temperature gradient along the active fiber is investigated numerically and experimentally, and an up to ∼75% enhancement of the stimulated Brillouin scattering (SBS) threshold is achieved. As a result, a 368-W single-frequency fiber laser is obtained with the beam quality factor of Mx²= 1.19, My²= 1.26. Overall, the technique of the confined-doped active fiber provides a promising approach to scale the output power of single-frequency single-mode fiber lasers.

Low-numerical aperture confined-doped long-tapered Yb-doped silica fiber for a single-mode high-power fiber amplifier

A low-numerical aperture (NA) confined-doped long-tapered (LCT) Yb-doped fiber is proposed and fabricated by modified chemical vapor deposition combined with solution doping technique. The LCT fiber owns the core NA of ∼0.05 and the gain dopant doping diameter ratio of ∼77%, with a core/cladding diameter of 25/400 µm at both ends and 37.5/600 µm in the middle. The laser performance is demonstrated by a bidirectional pumping all-fiber amplifier, of which a 4.18-kW single-mode (M² factor ∼1.3) laser output is achieved with a slope efficiency of ∼82.8%. Compared with the conventional fiber, the co-pumped and counter-pumped transverse mode instability thresholds and beam quality of the LCT fiber are remarkably enhanced. Throughout the continuous operation, the LCT fiber amplifier presents high power stability with fluctuation of < 1%. These results indicate that LCT fiber has great potential in power scaling remaining excellent beam quality.

More than 6 kW near single-mode fiber amplifier based on a bidirectional tandem pumping scheme

We demonstrate the first all-fiber monolithic bidirectional tandem pumping amplifier, to the best of our knowledge, based on a 30/250 µm conventional ytterbium-doped double-clad fiber. By optimizing the bidirectional pumping power distribution, an output power of 6.22 kW is obtained with near single-mode beam quality (M²=1.53), and no transverse mode instability is observed. This work could provide an excellent reference for high-power, higher-brightness fiber lasers.

Feature issue introduction: advanced solid-state lasers

This joint issue of Optics Express and Optical Materials Express features 36 state-of-the art articles written by authors who participated in the international conference advanced solid state lasers held online from October 3-7, 2021. This review provides a summary of these articles covering a wide spectrum of topics around solid-state lasers from materials research to sources and from design innovation to applications.

Bidirectional tandem-pumped high-brightness 6 kW level narrow-linewidth confined-doped fiber amplifier exploiting the side-coupled technique

In this work, a bidirectional tandem-pumped high-power narrow-linewidth confined-doped ytterbium fiber amplifier is demonstrated based on side-coupled combiners. Benefiting from the large-mode-area design of the confined-doped fiber, the nonlinear effects, including stimulated Raman (SRS) and stimulated Brillouin scattering (SBS), are effectively suppressed. While the transverse mode instability (TMI) effect is also mitigated through the combination of confined-doped fiber design and the bidirectional tandem pumping scheme. As a result, narrow-linewidth fiber laser with 5.96 kW output power is obtained, the slope efficiency and the 3-dB linewidth of which are ∼81.7% and 0.42 nm, respectively. The beam quality is well maintained during the power scaling process, being around M²= 1.6 before the TMI occurs, and is well kept (M²= 2.0 at 5.96 kW) even after the onset of TMI. No SRS or SBS is observed at the maximum output power, and the signal-to-noise ratio reaches as high as ∼61.4 dB. To the best of our knowledge, this is the record power ever reported in narrow-linewidth fiber lasers. This work could provide a good reference for realizing high-power high-brightness narrow-linewidth fiber lasers.