Imaging performance of an ultra-precision machining-based Fresnel lens in ophthalmic devices

An Improved 3D OPC Method for the Fabrication of High-Fidelity Micro Fresnel Lenses

Based on three-dimensional optical proximity correction (3D OPC), recent advancements in 3D lithography have enabled the high-fidelity customization of 3D micro-optical elements. However, the micron-to-millimeter-scale structures represented by the Fresnel lens design bring more stringent requirements for 3D OPC, which poses significant challenges to the accuracy of models and the efficiency of algorithms. Thus, a lithographic model based on optical imaging and photochemical reaction curves is developed in this paper, and a subdomain division method with a statistics principle is proposed to improve the efficiency and accuracy of 3D OPC. Both the simulation and the experimental results show the superiority of the proposed 3D OPC method in the fabrication of Fresnel lenses. The computation memory requirements of the 3D OPC are reduced to below 1%, and the profile error of the fabricated Fresnel lens is reduced 79.98%. Applying the Fresnel lenses to an imaging system, the average peak signal to noise ratio (PSNR) of the image is increased by 18.92%, and the average contrast of the image is enhanced by 36%. We believe that the proposed 3D OPC method can be extended to the fabrication of vision-correcting ophthalmological lenses.

High diopter spectacle using a flexible Fresnel lens with a combination of grooves

In this study, the Fresnel lens was investigated as a potential candidate for vision correction in patients with myopia. A few previous studies have suggested this idea; however, Fresnel lenses are limited by their aesthetics and quality. Therefore, we designed a combination of Fresnel lens grooves with a constant height and pitch of 13 µm and 0.1 mm, respectively, to overcome the limitations caused by ultra-precision machining with a tool nose radius of 30 µm. A thin replicated Fresnel lens with a power of -5 diopter was procured and applied directly as spectacles that are unattached to the normal lens. The optical performance and image quality of the Fresnel lens were compared with those of a conventional lens possessing the same power in both near and far vision. These results extend the applicability for the use of Fresnel lenses as vision-correcting ophthalmological lenses and imaging systems.