Sub-30-fs Yb:YAG thin-disk laser oscillator operating in the strongly self-phase modulation broadened regime

Intra-oscillator high harmonic source reaching 100-eV photon energy

Resonant enhancement inside an optical cavity has been a wide-spread approach to increase efficiency of nonlinear optical conversion processes while reducing the demands on the driving laser power. This concept has been particularly important for high harmonic generation XUV sources, where passive femtosecond enhancement cavities allowed significant increase in repetition rates required for applications in photoelectron spectroscopy, XUV frequency comb spectroscopy, including the recent endeavor of thorium nuclear clock development. In addition to passive cavities, it has been shown that comparable driving conditions can be achieved inside mode-locked thin-disk laser oscillators, offering a simplified single-stage alternative. This approach is less sensitive to losses thanks to the presence of gain inside the cavity and should thus allow higher conversion efficiencies through tolerating higher intensity in the gas target. Here, we show that the intra-oscillator approach can indeed surpass the much more mature technology of passive enhancement cavities in terms of XUV flux, even reaching comparable values to single-pass sources based on chirped-pulse fiber amplifier lasers. Our system operates at 17 MHz repetition rate generating photon energies between 60 eV and 100 eV. Importantly, this covers the highly attractive wavelength for the silicon industry of 13.5 nm at which our source delivers 60 nW of outcoupled average power per harmonic order.

High-power 100 W Kerr-lens mode-locked ring-cavity femtosecond Yb:YAG thin-disk oscillator

High-power femtosecond pulses delivered at a high-repetition rate will aid machining throughput and improve signal-to-noise ratios for sensitive measurements. Here we demonstrate a Kerr-lens mode-locked femtosecond Yb:YAG ring-cavity thin-disk oscillator with a multi-pass scheme for the laser beam. With four passes through the thin disk, 175-fs pulses were delivered from the oscillator at an average power of 71.5 W and a repetition rate of 65.3 MHz. The corresponding intra-cavity peak power of 110 MW is ample for intra-cavity nonlinear conversion into more exotic wavelength ranges. With six passes, the average output power reached 101.3 W. To the best of our knowledge, this is the highest average output power of any mode-locked ring laser. These results confirm the viability of using multi-pass configuration on a thin-disk ring oscillator for high-throughput femtosecond applications.

Sub-100-fs Kerr-lens mode-locked Yb:Lu2O3 laser with more than 60% optical efficiency

Yb-doped sesquioxides represent one of the most excellent laser crystals applying for high-power ultrafast lasers owing to their very high thermal conductivities and broadband emission spectra. Pumped by a high-brightness Yb-fiber laser at 976 nm, the Yb:Lu2O3 laser delivers a maximum output power that amounts to 3.55 W in the continuous-wave regime with an optical efficiency of 75%. In the mode-locked regime, 90-fs pulses were generated via soft-aperture Kerr-lens mode-locking at 1080.6 nm with an average output power of 2.85 W, which corresponds to an optical efficiency of 60.3% and a slope efficiency of 68.8%. Average output power of the mode-locked Yb:Lu2O3 laser can be further scaled to 3.05 W at the expense of the pulse duration (178 fs), which corresponds to an optical efficiency as high as 64.5%. To the best of our knowledge, it is the highest optical efficiency ever reported from any solid-state Kerr-lens mode-locked Yb lasers.

Efficient passively Q switched lasers with a large-energy stored Yb:LuScO3 crystal

Ytterbium (Yb)-ions-doped sesquioxide crystal is an attractive gain medium for a tunable and pulsed laser owing to its high thermal conductivity. In particular, it has been identified that Yb:LuScO₃ has the largest energy storage property compared with other sesquioxide crystals, which is favorable for passive Q switching. In this Letter, continuous wave (CW) and the first, to the best of our knowledge, passively Q switched laser operations were demonstrated with a Yb:LuScO₃ crystal. For CW laser operation, it generated the maximum output power of 8.68 W, corresponding to a slope efficiency up to 78.3%. Using Cr:YAG crystals as saturable absorbers, stable passive Q switching lasers were obtained with the Yb:LuScO₃ crystal. Both the CW and Q switched lasers operate on the strongest fluorescence emission peak of 1038 nm. With Cr:YAG as the saturable absorber, efficient passively Q switched lasers with a slope efficiency of 45% were obtained with the pulse width, pulse energy, and peak power of 5.9 ns, 116 µJ, and 18.5 kW, respectively.

Kerr-lens mode-locked Yb:YAlO3 laser generating 24-fs pulses at 1085 nm

We report on a Kerr-lens mode-locked Yb:YAlO₃ laser generating soliton pulses as short as 24 fs at 1085 nm with an average output power of 186 mW and a pulse repetition rate of 87.5 MHz, representing the shortest pulses ever achieved from any mode-locked laser based on Yb³⁺-doped structurally ordered crystal. Optimized for power-scalable operation, the Yb:YAlO₃ laser delivers 1.9 W at 1060 nm at the expense of a longer pulse duration of 44 fs, corresponding to a peak power of 462 kW and an optical efficiency of 43.2%.

Semiconductor saturable absorber mirror mode-locked Yb:YAP laser

We report on sub-30 fs pulse generation from a semiconductor saturable absorber mirror mode-locked Yb:YAP laser. Pumping by a spatially single-mode Yb fiber laser at 979 nm, soliton pulses as short as 29 fs were generated at 1091 nm with an average output power of 156 mW and a pulse repetition rate of 85.1 MHz. The maximum output power of the mode-locked Yb:YAP laser amounted to 320 mW for slightly longer pulses (32 fs) at an incident pump power of 1.52 W, corresponding to a peak power of 103 kW and an optical efficiency of 20.5%. To the best of our knowledge, this result represents the shortest pulses ever achieved from any solid-state Yb laser mode-locked by a slow, i.e., physical saturable absorber.

Efficient XUV-light out-coupling of intra-cavity high harmonics by a coated grazing-incidence plate

We experimentally demonstrate an efficient and broadband extreme-ultraviolet light (XUV) out-coupling mechanism of intra-cavity generated high harmonics. The mechanism is based on a coated grazing-incidence plate (GIP), which utilizes the enhanced reflectivity of s-polarized light in comparison to p-polarized light for large angles of incidence (AoI). We design and produce a 60°-AoI coated GIP, tailored specifically for the high demands inside a sub-50-fs Kerr-lens mode-locked Yb:YAG thin-disk laser oscillator in which high harmonic generation (HHG) is driven at ∼450 MW peak power and 17 MHz repetition rate. The coated GIP features an XUV out-coupling efficiency of >25% for photon energies ranging from 10 eV to 60 eV while being anti-reflective for the driving laser field. The XUV spectra reach up to 52 eV in argon and 30 eV in xenon. In a single harmonic, we out-couple 1.3 µW of XUV average power at 37 eV in argon and 5.4 µW at 25 eV in xenon. The combination of an improved HHG driving laser performance and the out-coupling via the coated GIP enabled us to increase the out-coupled XUV average power in a single harmonic by a factor of 20 compared to previous HHG inside ultrafast laser oscillators. Our source approaches the state-of-the-art out-coupled XUV power levels per harmonic of femtosecond enhancement cavities operating at comparable photon energies.

Kerr-lens mode-locked ytterbium-activated orthoaluminate laser

We report on the first, to the best of our knowledge, Kerr-lens mode-locked laser based on an Yb³⁺-doped perovskite-type orthoaluminate crystal exploiting two different principal light polarizations. The Yb:(Y,Gd)AlO₃ laser delivers soliton pulses as short as 32 fs at 1067 nm with an average output power of 328 mW and a pulse repetition rate of ∼84.6 MHz for E || a polarization. For the orthogonal E || b polarization, 33-fs pulses are generated at 1057 nm with an average output power of 305 mW. Power scaling to a maximum average output power reaching 2.07 W is achieved at the expense of longer pulse duration (72 fs for E || b), corresponding to an optical efficiency of 43.9% and a peak power of 303 kW.

Efficient few-cycle Yb-doped laser oscillator with Watt-level average power

So far, the operation of ultrafast bulk laser oscillators based on Yb-doped gain materials and directly emitting few-cycle pulses have been restricted to low optical-to-optical efficiencies and average output powers of only a few milliwatt. This performance limitation can be attributed to the commonly-applied standard collinear pumping scheme in which the optical pump is transmitted through a dichroic mirror whose spectral transmission and dispersion properties severely perturb the oscillating pulse when its optical spectrum extends towards the pump wavelength. In this study, we report on a novel pumping scheme relying on cross polarization that overcomes this challenge. In our concept, the pump transmitting mirror is highly transmissive for the pump light in p-polarization, while it is highly reflective for the laser light in s-polarization over a broad wavelength range, even covering the pump wavelength and beyond. In contrast to a standard thin-film polarizer featuring similar polarization dependent properties, it provides a low and flat dispersion profile over a broad spectral range for the s-polarization. Implementing this pumping scheme in a soft-aperture Kerr-lens mode-locked bulk laser oscillator based on the gain material Yb:CALGO, we achieve clean 22-fs soliton pulses at 729 mW of average output power and an optical-to-optical efficiency of 25%. In a second configuration optimized for the highest average output power, we demonstrate a high optical-to-optical efficiency of 36.6%, which was obtained for 31-fs pulses at 1.63 W of average output power. In a third configuration we experimentally confirm the limiting effect of a dichroic mirror commonly used in the standard collinear pumping scheme. All the results presented here and obtained in the first and second configuration generate pulses with a center wavelength ranging from 1030 nm to 1056 nm, well within the spectral region of high gain cross sections of Yb:CALGO. While this initial demonstration was realized using a commercial diffraction-limited fiber laser as pump source, the pump geometry appears also well suited for pumping with laser diodes coupled into multimode fibers. This novel approach opens up new opportunities for compact and cost-efficient high-power few-cycle bulk laser oscillators based on Yb-doped gain materials and can be applied to any gain material with small quantum defect.