Four-mode 2D/3D switchable display with a 1D/2D convertible liquid crystal lens array

Refractive Fresnel liquid crystal lenses driven by two voltages

We propose and demonstrate a high-performance refractive Fresnel liquid crystal (LC) lens with a simple electrode design. The interconnected circular electrodes enable the creation of a parabolic voltage distribution within each Fresnel zone using only two driving voltages. By controlling these voltages within the linear response region of LC material, the desired parabolic phase profile can be achieved. We provide a detailed discussion on the electrode structure design methodology and operating principles of the lens. In our experiments, we constructed a four-zone Fresnel LC lens with a total aperture of 8 mm. The results show that the optical power of the lens can be continuously adjusted from -1.30 D to +1.33 D. Throughout the process of electrically tuning the optical power, the phase distribution within each Fresnel zone maintains a parabolic profile. These results demonstrate the high-performance of the proposed Fresnel LC lens.

Method for increasing the utilization rate of birefringence in liquid crystal lenses

We propose a method to increase the utilization rate of birefringence in liquid crystal (LC) lenses. The method involves designing electrode patterns based on the phase response curve of the LC material, enabling the lenses to operate across a wide range of driving voltages while generating the desired phase profile. The underlying principle of this technique is discussed in detail. Electrode patterns have been successfully designed for positive and negative cylindrical LC lenses. The experimental results demonstrate that the designed lenses generate a parabolic phase profile even when the driving voltage exceeds the linear response region. The utilization rate of LC birefringence for the positive lens has increased from 41.3% to 69.7%, indicating a 68.8% increase from the original. For the negative lens, the utilization rate has risen from 41.8% to 68.7%, representing a 64.4% increase from the original.

Liquid crystal lens with a shiftable optical axis

A liquid crystal (LC) lens with a laterally shiftable optical axis is proposed and demonstrated. The optical axis of the lens can be driven to shift within the lens aperture without compromising its optical properties. The lens is constructed by two glass substrates with identical interdigitated comb-type finger electrodes on the inner surfaces, and they are oriented at 90° with respect to each other. The distribution of voltage difference between two substrates is determined by eight driving voltages, and is controlled within the linear response region of LC materials, thereby generating a parabolic phase profile. In experiments, an LC lens with an LC layer of 50 µm and an aperture of 2 mm × 2 mm is prepared. The interference fringes and focused spots are recorded and analyzed. As a result, the optical axis can be driven to shift precisely in the lens aperture, and the lens maintains its focusing ability. The experimental results are consistent with the theoretical analysis, and good performance of the LC lens is demonstrated.

Fast response electrically controlled liquid crystal lens array for high resolution 2D/3D switchable display

A fast response electrically controlled liquid crystal (LC) lens array is revealed. In order to realize the fast response, a double LC layer structure is adopted. The fabricated LC lens array has a small pitch of 310µm and LC layer with a thickness of 50μm. Experimental results show that the focal length of the LC lens array can be continuously adjusted by low driving voltage (∼6.5V_rms), and the shortest focal length is 0.5mm. The switching between 2D display and 3D display is realized by controlling the voltage off and on state of the LC lens array. Experimental result shows that the 2D/3D switchable display has a fast response time of 16ms. The short pitch LC lens array is expected to be used in high-resolution 2D/3D switchable display.

Self-assembled liquid crystal architectures for soft matter photonics

Self-assembled architectures of soft matter have fascinated scientists for centuries due to their unique physical properties originated from controllable orientational and/or positional orders, and diverse optic and photonic applications. If one could know how to design, fabricate, and manipulate these optical microstructures in soft matter systems, such as liquid crystals (LCs), that would open new opportunities in both scientific research and practical applications, such as the interaction between light and soft matter, the intrinsic assembly of the topological patterns, and the multidimensional control of the light (polarization, phase, spatial distribution, propagation direction). Here, we summarize recent progresses in self-assembled optical architectures in typical thermotropic LCs and bio-based lyotropic LCs. After briefly introducing the basic definitions and properties of the materials, we present the manipulation schemes of various LC microstructures, especially the topological and topographic configurations. This work further illustrates external-stimuli-enabled dynamic controllability of self-assembled optical structures of these soft materials, and demonstrates several emerging applications. Lastly, we discuss the challenges and opportunities of these materials towards soft matter photonics, and envision future perspectives in this field.

Liquid crystal lens array with positive and negative focal lengths

A positive-negative tunable liquid crystal lens array is proposed by electrode design. The electrode structure consists of two main units, one of them is used to generate parabolic voltage profile and the other one distributes the voltage homogeneously across the lens aperture. The proposal features the advantages of high-quality performance, simple fabrication process (a single lithographic step), compact design, low voltages and simple driving method. In addition, the lens array can be driven as a square lens array or a rotatable cylindrical lens array. The voltage difference between the electrodes on the inner face of two substrates is controlled within the range that the phase of liquid crystal layer responds linearly to voltage difference, then the phase of the lens array maintains parabolic profile in the whole focus range. In experiments, a lens array with 30 µm liquid crystal layer is fabricated using the designed electrode. The size of the array area is 11 × 11 mm, and the side length of an individual square lens is 1.0 mm. The results show that the phase profile matches with the parabolic profile during focus tuning, and good focusing effect of the positive lens is observed. As a result, a liquid crystal lens array with high-quality performance is experimentally demonstrated, and the experimental results are consistent with the theoretical analyses.

Tunable liquid crystal grating based holographic 3D display system with wide viewing angle and large size

As one of the most ideal display approaches, holographic 3-dimensional (3D) display has always been a research hotspot since the holographic images reproduced in such system are very similar to what humans see the actual environment. However, current holographic 3D displays suffer from critical bottlenecks of narrow viewing angle and small size. Here, we propose a tunable liquid crystal grating-based holographic 3D display system with wide viewing angle and large size. Our tunable liquid crystal grating, providing an adjustable period and the secondary diffraction of the reconstructed image, enables to simultaneously implement two different hologram generation methods in achieving wide viewing angle and enlarged size, respectively. By using the secondary diffraction mechanism of the tunable liquid crystal grating, the proposed system breaks through the limitations of narrow viewing angle and small size of holographic 3D display. The proposed system shows a viewing angle of 57.4°, which is nearly 7 times of the conventional case with a single spatial light modulator, and the size of the reconstructed image is enlarged by about 4.2. The proposed system will have wide applications in medical diagnosis, advertising, education and entertainment and other fields.

Focus issue introduction: 3D image acquisition and display: technology, perception and applications

This Feature Issue of Optics Express is organized in conjunction with the 2021 Optica (OSA) conference on 3D Image Acquisition and Display: Technology, Perception and Applications which was held virtually from 19 to 23, July 2021 as part of the Imaging and Sensing Congress 2021. This Feature Issue presents 29 articles which cover the topics and scope of the 2021 3D conference. This Introduction provides a summary of these articles.