Holographic curved waveguide combiner for HUD/AR with 1-D pupil expansion

Comparison of holographic recording options for reflection-format and transmission-format coupler-type diffractive optical elements: theoretical exploration and experimental validation

The holographic recording of gratings that have very large diffraction angles and/or slants is challenging because recording requires beam angles that are not possible without the use of prisms. However, by using a recording wavelength that is different from (usually shorter than) the intended operating wavelength, it is possible to record with less challenging beam angles. In this paper, a recently developed model that allows systematic investigation of the potential and limits of this wavelength-shift recording technique is extended to include a reflection format. Transmission and reflection recording options are compared systematically for the first time, and it is shown that in reflection recording, some couplers can be recorded more easily when the recording wavelength is longer than the operating wavelength. This opens up new design options for previously challenging regions of the spectrum. Experimental validation of the reflection version of the model is carried out by holographic recording in reflection mode at 532 nm in Bayfol HX 200 photopolymer, demonstrating the coupling of blue light.

Compact pupil-expansion AR-HUD based on surface-relief grating

Augmented reality head-up display (AR-HUD) using diffractive waveguide is a challenging research field. It can drastically reduce the system volume compared with AR-HUD based on freeform mirror. However, one of the remaining challenges that affects the performance of the diffractive waveguide is to expand the eye-box while maintaining the illuminance uniformity. In this paper, a one-dimensional pupil expansion diffractive optical waveguide system for AR-HUD is presented. The optimization of grating parameters is based on scalar diffraction theory and rigorous coupled wave analysis (RCWA). Then, the illuminance uniformity is optimized through non-sequential ray tracing. We simulate and construct a waveguide-based AR-HUD. The presented AR-HUD realized an exit pupil size of 80 mm × 15 mm and a field of view of 10° × 5° at the wavelength of 532 nm.

See-through display based on commercial photopolymer: Optimization and shrinkage effects

Nowadays augmented reality, 3D Image, mixed reality and see-through applications are very attractive technologies due to their great potential. Holographic optical elements can provide interesting solutions for injection and extraction of the image in the waveguides that are part of the see-through devices. We have developed a coupled waveguide system based on slanted transmission gratings recorded in manufactured photopolymers. In this work we optimize our schedule to a commercial photopolymer for this high demanded application. We demonstrate that high diffraction efficiencies can be obtained if we optimize the recording geometry, recording intensity and recording time for this material. In addition, we study the effects of shrinkage in our holographic system. In general shrinkage is an important drawback for holographic applications, nevertheless we demonstrate how shrinkage can help these systems open new possibilities. Lastly, we show how to significantly improve the quality of the guided image.

3D head-up display with a multiple extended depth of field based on integral imaging and holographic optical elements

We propose a 3D head-up display with a multiple extended depth of field based on integral imaging and holographic optical elements (HOEs). The system consists of two components, an integral imaging module for generating 3D target objects and a holographic combiner for off-axis diffraction and image magnification. By recording HOEs with different optical powers at different locations on the same recording material, 3D imaging at multiple depth ranges is achieved. The designed and built HUD prototype verifies the feasibility of the method. The center depth planes of the red and green 3D images are at 600 mm and 2200 mm. The theoretical depth magnifications of the red and green channels are 1.5 and 5.5, and the measured depth ranges are approximately 250 mm and 850 mm. In addition, the influencing factors and improvement methods of resolution in LED illumination or laser illumination are analyzed.

Method for parallelism measurement of geometrical waveguides based on the combination of an autocollimator and a testing telescope

Augmented reality (AR) is desperately needed in the Metaverse. The geometrical waveguide receives increased attention in AR technology as achieving high resolution, full-color display, etc. However, the stray light and ghost image problems resulting from the parallelism errors severely deteriorate the imaging quality. According to the light propagation of the waveguide, a measuring system based on the combination of the autocollimator and the testing telescope (CAT) method was proposed to measure the parallelism errors of the partially reflective mirror array (PRMA). The results indicated that this method could measure the parallelism errors precisely with the maximum repeatability of 0.63 ^{' '} . The method could decouple the coupling of the parallelism errors of the PRMA and the substrate surfaces to imaging quality effectively. The precise parallelism measuring is expected to contribute to mass production and low cost by promoting the waveguide design and fabrication.

Quantitative analysis on self-focusing properties of H-PDLC flexible curved radius gratings

In general, the shape of traditional holographic grating is fixed and immutable, the period will not change after fabrication, this means that the modulation effect on the light field is unalterable. However, traditional grating cannot satisfy all requirements of current optical systems. In order to increase the versatility of holographic grating, a flexible curved radius grating (FCRG) which consists of holographic polymer-dispersed liquid crystal (H-PDLC) was proposed. The FCRG has an important self-focusing property that it can be adjusted the focal length by changing its own radius of curvature correspondingly. In this paper, we use the scalar diffraction theory to analysis the interference and diffraction processes for FCRG under different conditions, then a relationship equation has been deduced to express quantitatively about FCRG between its radius and focal length. According to the relationship, a tunable holographic element is achieved for the function of mechanically-controlled self-focusing effect. Experiments show that the FCRG has two conjugated focusing effects on the positive first-order and negative first-order, both two effects can achieve focus-adjusted ability by changing their radius of curvature. The FCRG provides a way for the coupler of curved waveguide display system for augmented reality in the future.

Eyebox uniformity optimization over the full field of view for optical waveguide displays based on linked list processing

Eyebox uniformity is an important indicator to evaluate the performance of optical waveguide displays. However, there is currently no standard design approach that achieves ideal uniformity over the full field of view (FOV) within the eyebox. Here, a novel method for eyebox uniformity optimization based on linked list processing is proposed. The linked list processing method can fast record the light trajectory and calculate the optimal numerical diffraction efficiency distribution of the coupler. We use the linked list method for an L-shaped diffractive optical waveguide and solve the matched coupler structure by combining rigorous coupled-wave analysis (RCWA) and the simplex method. By building the model on LightTools and demonstrating the illuminance uniformity, the feasibility of the method is verified. In the FOV range of 15°× 15°, the eyebox uniformity reaches 0.9 at the central viewing angle and the overall eyebox uniformity is 0.617.

Compact full-color augmented reality near-eye display using freeform optics and a holographic optical combiner

We develop a compact full-color augmented reality near-eye display system with a multicolor holographic optical combiner and a freeform relay system. The digital image is produced by a full-color micro organic light-emitting diode (Micro-OLED) display module. The freeform relay system includes four freeform optics and a holographic optical mirror, which are employed to correct both the monochromatic and chromatic aberrations caused by the holographic optical combiner. The two multicolor holographic mirrors have a three-layer laminated structure and are delicately fabricated to yield an improved diffractive efficiency and a reduced efficiency difference for red, green, and blue colors. The high degrees of freedom of freeform optics, and the thin and light nature of the holographic optical combiner yield a compact form factor near-eye display system with a diagonal field of view (FOV) of 20° and the eye-box of 5 mm × 5 mm. Two prototypes are built to demonstrate the feasibility of the proposed display system.

Uniformity improvement of a reconstructed-holographic image in a near-eye display system using off-axis HOE

When a near-eye display (NED) device reproduces an image at a location close to the eye, the virtual image is implemented at a large angle. The uniformity of the image is unbalanced due to the change in diffraction efficiency by the hologram recording angle and angular selectivity. This study proposes a method for implementing an optimal uniform image by analyzing the diffraction efficiency and the reconstructed image was analyzed using angular selectivity generated while reproducing the source point of the diffused image as an intermediate element by holographic optical element (HOE). This research provides practical results for displaying high diffraction efficiency and immersive holographic images in the NED system with HOE as uniformed intermediate elements.

Design of off-axis reflective imaging systems based on freeform holographic elements

Holographic optical element (HOE) can be used in many areas in optics due to its characteristics of thin structure, flexible wavefront reconstruction/control ability and angular/wavelength selectivity. In this paper, we propose a design method of off-axis reflective imaging systems based on freeform HOEs, which are fabricated by freeform wavefronts. The freeform HOEs offer many degrees of design freedom and can correct the aberrations in nonsymmetric imaging systems. The initial imaging system with freeform HOEs is generated using a point-by-point design approach, and is used for the preliminary design of the imaging system and the freeform recording system of each HOE. Then a joint optimization is conducted for all the systems, simultaneously considering the imaging performance, the diffraction efficiency, the system constraints and fabrication to get the final design results. To validate the feasibility and effectiveness of the proposed method, an off-axis reflective head-up display system with good performance based on freeform HOEs is designed and fabricated. Detailed procedures of the design and development process of the prototype are demonstrated.