Efficient few-cycle Yb-doped laser oscillator with Watt-level average power

Sub-50-fs Kerr-lens mode-locked Yb-doped fluoride laser with 44% optical efficiency

Yb-doped fluoride has been demonstrated to be potential crystals for application in efficient ultrafast lasers. However, the trade-off between the shorter pulses with higher efficiencies is a challenge. In this work, using Y b,G d:C a S r F 2 crystal, we report on a sub-50-fs Kerr-lens mode-locked oscillator with an optical efficiency up to 44%. Pumped by a 976-nm diffraction-limited fiber laser and using chirped mirrors combined with prism pairs for the dispersion compensation, a pulse as short as 46 fs was obtained with 620-mW output power, corresponding to an optical efficiency more than 40%. Stable Kerr-lens mode-locking with RMS of output power lower than 0.3% and beam quality factors M 2<1.14 were achieved. Moreover, a maximum output power of 780 mW was obtained in continuous-wave operation with 55.3% optical efficiency. To the best of our knowledge, the results in this work represent the shortest pulses generated from Yb-doped fluoride lasers as well as the highest optical efficiencies ever reported in sub-100 fs Yb bulk lasers.

Growth, spectroscopy and SESAM mode-locking of a "mixed" Yb:Ca(Gd,Y)AlO4 disordered crystal

We present the growth, spectroscopy, continuous-wave (CW) and passively mode-locked (ML) operation of a novel "mixed" tetragonal calcium rare-earth aluminate crystal, Yb3+:Ca(Gd,Y)AlO4. The absorption, stimulated-emission, and gain cross-sections are derived for π and σ polarizations. The laser performance of a c-cut Yb:Ca(Gd,Y)AlO4 crystal is studied using a spatially single-mode, 976-nm fiber-coupled laser diode as a pump source. A maximum output power of 347 mW is obtained in the CW regime with a slope efficiency of 48.9%. The emission wavelength is continuously tunable across 90 nm (1010 - 1100 nm) using a quartz-based Lyot filter. With a commercial SEmiconductor Saturable Absorber Mirror to initiate and maintain ML operation, soliton pulses as short as 35 fs are generated at 1059.8 nm with an average output power of 51 mW at ∼65.95 MHz. The average output power can be scaled to 105 mW for slightly longer pulses of 42 fs at 1063.5 nm.

Sub-100-fs Kerr-lens mode-locked Yb:Lu2O3 laser with more than 60% optical efficiency

Yb-doped sesquioxides represent one of the most excellent laser crystals applying for high-power ultrafast lasers owing to their very high thermal conductivities and broadband emission spectra. Pumped by a high-brightness Yb-fiber laser at 976 nm, the Yb:Lu2O3 laser delivers a maximum output power that amounts to 3.55 W in the continuous-wave regime with an optical efficiency of 75%. In the mode-locked regime, 90-fs pulses were generated via soft-aperture Kerr-lens mode-locking at 1080.6 nm with an average output power of 2.85 W, which corresponds to an optical efficiency of 60.3% and a slope efficiency of 68.8%. Average output power of the mode-locked Yb:Lu2O3 laser can be further scaled to 3.05 W at the expense of the pulse duration (178 fs), which corresponds to an optical efficiency as high as 64.5%. To the best of our knowledge, it is the highest optical efficiency ever reported from any solid-state Kerr-lens mode-locked Yb lasers.

Powerful 1-µm 1-GHz optical frequency comb

A self-referenced optical frequency comb is presented based on Kerr-lens mode-locking of ytterbium-doped CALGO. The robust source delivers 3.5 W average power in 44 fs-long pulses at 1 GHz repetition rate. The residual root-mean-square timing jitter of the emitted pulse-train is 146 fs and the residual integrated phase noise of the carrier-envelope offset frequency is 107 mrad, both in a span from 1 Hz to 10 MHz. After stabilization, 2.7 W average power remains for direct application. This work represents the first multi-mode pumped Kerr-lens mode-locked optical frequency comb at gigahertz-level repetition rate.

Kerr-lens mode-locked Yb:YAlO3 laser generating 24-fs pulses at 1085 nm

We report on a Kerr-lens mode-locked Yb:YAlO₃ laser generating soliton pulses as short as 24 fs at 1085 nm with an average output power of 186 mW and a pulse repetition rate of 87.5 MHz, representing the shortest pulses ever achieved from any mode-locked laser based on Yb³⁺-doped structurally ordered crystal. Optimized for power-scalable operation, the Yb:YAlO₃ laser delivers 1.9 W at 1060 nm at the expense of a longer pulse duration of 44 fs, corresponding to a peak power of 462 kW and an optical efficiency of 43.2%.

Semiconductor saturable absorber mirror mode-locked Yb:YAP laser

We report on sub-30 fs pulse generation from a semiconductor saturable absorber mirror mode-locked Yb:YAP laser. Pumping by a spatially single-mode Yb fiber laser at 979 nm, soliton pulses as short as 29 fs were generated at 1091 nm with an average output power of 156 mW and a pulse repetition rate of 85.1 MHz. The maximum output power of the mode-locked Yb:YAP laser amounted to 320 mW for slightly longer pulses (32 fs) at an incident pump power of 1.52 W, corresponding to a peak power of 103 kW and an optical efficiency of 20.5%. To the best of our knowledge, this result represents the shortest pulses ever achieved from any solid-state Yb laser mode-locked by a slow, i.e., physical saturable absorber.

Efficient high-power sub-50-fs gigahertz repetition rate diode-pumped solid-state laser

In this article we present a directly diode-pumped high-power Kerr-lens mode-locked Yb:CALGO bulk laser oscillator operating at 1-GHz repetition rate. We report on two laser configurations optimized for either highest average power or shortest pulse duration. In the first configuration optimized for high average power, the oscillator delivers up to 6.9 W of average power, which is the highest average power of any ultrafast laser oscillator operating at gigahertz repetition rate. The 93-fs pulses have a peak power of 64 kW, and the optical-to-optical efficiency amounts to 37%. In the second configuration optimized for short pulse duration, we demonstrate 48-fs pulses at 4.1 W of average power corresponding to a higher peak power of 74 kW with 21% optical-to-optical efficiency. This is the shortest pulse duration and the highest peak power demonstrated by any GHz-class Yb-based laser oscillator. The compact laser setup is directly pumped by a low-cost multimode fiber-coupled laser diode and has a high potential as an economical yet powerful source for various applications.

Kerr-lens mode-locked ytterbium-activated orthoaluminate laser

We report on the first, to the best of our knowledge, Kerr-lens mode-locked laser based on an Yb³⁺-doped perovskite-type orthoaluminate crystal exploiting two different principal light polarizations. The Yb:(Y,Gd)AlO₃ laser delivers soliton pulses as short as 32 fs at 1067 nm with an average output power of 328 mW and a pulse repetition rate of ∼84.6 MHz for E || a polarization. For the orthogonal E || b polarization, 33-fs pulses are generated at 1057 nm with an average output power of 305 mW. Power scaling to a maximum average output power reaching 2.07 W is achieved at the expense of longer pulse duration (72 fs for E || b), corresponding to an optical efficiency of 43.9% and a peak power of 303 kW.

Sub-60-fs ultralow threshold and efficient Kerr-lens mode-locked Yb,Gd:CaSrF2 laser

In this Letter, using a Yb,Gd:CaSrF₂ co-doping mixed crystal, an ultra-low threshold and efficient Kerr-lens mode-locked femtosecond oscillator is realized with a mode-locking threshold as low as 150 mW. With a 200-mW pump power, the shortest pulses are obtained with a pulse duration of 57 fs. A maximum mode-locked output power of 185 mW is observed under a 500-mW pump power, corresponding to an optical-to-optical efficiency of up to 37%. To the best of our knowledge, the 150-mW threshold is the lowest pump power to realize Kerr-lens mode-locking operation in Yb-doped bulk lasers. Furthermore, an optical efficiency of 37% is the highest efficiency in Yb-doped fluoride bulk lasers to date. Our results provide a new basis for high-efficiency and low-threshold Yb-doped ultrafast bulk lasers.