Highly birefringent hollow-core anti-resonant terahertz fiber with a thin strut microstructure

3D-printed high-birefringence THz hollow-core anti-resonant fiber with an elliptical core

A high-birefringence and low-loss terahertz (THz) hollow-core anti-resonant fiber (THz HC-ARF) is designed and analyzed numerically by the finite element method (FEM). The THz HC-ARF is composed of an elliptical tube as the core for high birefringence guidance and a pair of symmetrical slabs arranged vertically as the cladding to attain low loss. Numerical analysis indicates that the birefringence reaches 10-2 in the transmission window between 0.21 and 0.35 THz. The highest birefringence is 4.61 × 10-2 at 0.21 THz with a loss of 0.15 cm-1. To verify the theoretical results, the THz HC-ARF is produced by three-dimensional (3D) printing, and the transmission characteristics are determined by THz time-domain spectroscopy (THz-TDS). High birefringence in the range of 2.17 × 10-2 to 3.72 × 10-2 and low loss in the range of 0.12 to 0.18 cm-1 are demonstrated experimentally in the 0.2 to 0.27 THz transmission window. The highest birefringence is 3.72 × 10-2 at 0.22 THz and the corresponding loss is 0.18 cm-1. The THz HC-ARF shows the highest birefringence besides relatively low loss compared to similar THz HC-ARFs reported recently.

Active control of terahertz waves based on hybrid VO2 periodic corrugated waveguides

We describe a method for the active control of terahertz (THz) waves using hybrid vanadium dioxide (VO₂) periodic corrugated waveguide. Unlike liquid crystals, graphene and semiconductors and other active materials, VO₂ exhibits a unique insulator-metal transition characteristic by the electric fields, optical, and thermal pumps, resulting in five orders of magnitude changes in its conductivity. Our waveguide consists of two gold coated plates with the VO₂-embedded periodic grooves, which are placed in parallel with the grooves face to face. Simulations show that this waveguide can realize mode switching by changing the conductivity of the embedded VO₂ pads, whose mechanism is attributed to the local resonance induced by defect mode. Such a VO₂-embedded hybrid THz waveguide is favorable in practical applications such as THz modulators, sensors and optical switches, and provides an innovative technique for manipulating THz waves.

Optimization method for low-loss single-mode bending negative curvature anti-resonant hollow-core fiber designed by mode modification

A method of designing negative curvature anti-resonant hollow-core fibers (NC-AR-HCFs) with bending resistance is proposed, by which the fundamental mode (FM) and higher-order mode (HOM) can be adjusted. An asymmetric double-ring negative curvature hollow-core fiber (ADR-NC-HCF) is proposed to verify the method. The ADR-NC-HCF achieves the FM loss of 0.8 dB/km at 1550 nm under the bending radius of 20 mm. The coupling relation between the modes in ADR-NC-HCFs is analyzed revealing the physical principle of the design method. Based on the principle, the fiber can be directionally optimized to achieve a lower loss of the FM or higher-order mode extinction ratio.

Twin-tube terahertz fiber for a polarization filter

A simple polymer twin-tube terahertz (THz) fiber that can be used as a polarization filter is proposed and investigated using the finite element method in this paper. The twin-tube THz fiber consists of two closely spaced identical tubes located symmetrically inside the protecting jacket. The simulation results show that the y-polarization fundamental mode (YPFM) can be well confined between the two tube walls near the fiber center, while the x-polarization fundamental mode (XPFM) has a huge confinement loss due to the coupling with the tube mode. For the fundamental mode (FM), a polarization extinction ratio (PER) of 30 dB can be realized after a 1.3 cm length of the fiber, and the insertion loss of the YPFM is less than 0.5 dB at 1 THz. In addition, higher order modes (HOMs) can be effectively suppressed by further increasing the fiber length. Simulation results indicate that all HOMs have powers being 30 dB lower than that of the supported YPFM after a 7.44 cm length of the fiber, and the insertion loss of the YPFM is less than 2.7 dB at 1 THz. Furthermore, the effects of fiber structure parameters on the loss properties are investigated, proving that the proposed fiber has a good fabrication tolerance. Owing to the simple structure, the proposed fiber polarization filter is easy to be fabricated and low-cost, which makes it a potential application in commercial THz systems.