Determination of detonation characteristics by laser-induced plasma spectra and micro-explosion dynamics

Enhancing the combustion of nAl with AlF3 coating: gas-solid reaction mechanism for reducing combustion agglomeration of Al powder

The combustion agglomeration of nano-aluminum (nAl) powder leads to incomplete combustion, which seriously hinders its application as metal fuel. In this work, nAl@AlF3 composites were produced by coating nAl with AlF3via a facile chemical deposition method. TEM and SEM analyses indicated that the AlF3 layer was evenly coated on the surface of nAl with a thickness of 4.6-9.1 nm, thereby varying the quantity of AlF3 applied. Experimental results from combustion indicated that the prepared nAl@AlF3 composites exhibit superior combustion efficiency, a higher combustion rate, and reduced combustion agglomeration as compared to raw nAl. Contrary to the widely accepted explanation that volatilization of AlF3 hinders Al combustion agglomeration, we proved that the gas-solid reaction between nAl and AlF3 plays an important role in inhibiting the sintering of nAl particles produced. The gaseous intermediate (i.e., AlOF and HF) released from the hydrolysis of AlF3 could reduce the diffusion barrier of Al2O3 to facilitate the reaction of Al core, which enhances the combustion reaction kinetics. More importantly, these gaseous products actively participate in the reaction cycle to continuously exert their catalytic effects.

Laser-induced shock wave two-dimensional extraction technology based on a beam deflection method

This paper introduces a method for analyzing the spatiotemporal progression of laser-induced shock waves using the beam deflection technique. This method allows for the accurate measurement of the shock wave evolution and can replace high-speed cameras. The results demonstrate the detection signals at various distances and energies, as well as the extraction and reconstruction of the shock wave velocities and propagation trajectories. The characteristic velocities of the shock waves propagating in air from various metals and energetic materials were measured and compared with the results obtained from high-speed cameras. The study also predicts the macroscopic detonation velocity of energetic materials based on the characteristic velocity. Overall, this approach offers a reliable and cost-effective method for studying the shock waves and has potential applications in various fields.

Properties of Mixed Crystal Coprecipitation Substances of Ammonium Nitrate and Potassium Perchlorate Prepared by the Evaporative Solvent Method

Ammonium perchlorate (AP) has been widely used as an oxidizer in propellants and military mixed explosives in recent years. However, its high characteristic signal, environmental pollution, and poor detonation performance have prompted the industry to seek alternatives to AP. Ammonium nitrate (AN) is a suitable substitute due to its low characteristic signal, lack of pollution, and excellent detonation performance. However, its room-temperature phase transition and hygroscopicity affect its practical use. In this work, we prepared mixed crystal coprecipitation (MCC) materials of AN and potassium perchlorate (KP) using the evaporative solvent method. The characterization of AN/KP MCCs was carried out by combining TG-DSC, XRD, FT-IR, and SEM analysis, revealing that the formation of MCCs by AN and KP is due to ion exchange between the two components. AN/KP MCCs not only solve the problem of room-temperature phase transition in AN but also reduce its hygroscopicity. Furthermore, AN/KP MCCs have mechanical sensitivity, explosive performance, and specific impulse similar to pure AN, but compared to AN, AN/KP MCCs have higher density, effective oxygen content, and thermal stability. Compared with existing oxidizers AN, AP, and KP, AN/KP MCCs with high density, low sensitivity, high oxygen content, and high safety have obvious advantages and have good prospects in the application of oxidizers in solid propellants and military mixed explosives.

Shock physics and shadowgraphic measurements of laser-produced cerium plasmas

Shadowgraphic measurements are combined with theory on gas-dynamics to investigate the shock physics associated with nanosecond laser ablation of cerium metal targets. Time-resolved shadowgraphic imaging is performed to measure the propagation and attenuation of the laser-induced shockwave through air and argon atmospheres at various background pressures, where stronger shockwaves characterized by higher propagation velocities are observed for higher ablation laser irradiances and lower pressures. The Rankine-Hugoniot relations are also employed to estimate the pressure, temperature, density, and flow velocity of the shock-heated gas located immediately behind the shock front, predicting larger pressure ratios and higher temperatures for stronger laser-induced shockwaves.