All-inorganic halide-perovskite polymer-fiber-photodetector for high-speed optical wireless communication

Geometric Implications of Photodiode Arrays on Received Power Distribution in Mobile Underwater Optical Wireless Communication

Underwater optical wireless communication (UOWC) has gained interest in recent years with the introduction of autonomous and remotely operated mobile systems in blue economic ventures such as offshore food production and energy generation. Here, we devised a model for estimating the received power distribution of diffused line-of-sight mobile optical links, accommodating irregular intensity distributions beyond the beam-spread angle of the emitter. We then used this model to conduct a spatial analysis investigating the parametric influence of the placement, orientation, and angular spread of photodiodes in array-based receivers on the mobile UOWC links in different Jerlov seawater types. It revealed that flat arrays were best for links where strict alignment could be maintained, whereas curved arrays performed better spatially but were not always optimal. Furthermore, utilizing two or more spectrally distinct wavelengths and more bandwidth-efficient modulation may be preferred for received-signal intensity-based localization and improving link range in clearer oceans, respectively. Considering the geometric implications of the array of receiver photodiodes for mobile UOWCs, we recommend the use of dynamically shape-shifting array geometries.

Fluorescent antenna based on Förster resonance energy transfer (FRET) for optical wireless communications

The use of fluorescent antennas in optical wireless communications (OWC) has been demonstrated previously, and it has been shown that it is an efficient method for enhancing receiver performance, providing both signal gain and a wide field of view (FoV). To achieve a high concentration gain at the receiver output, the selected fluorophores should have a high photoluminescence quantum yield (PLQY), limited overlap between their absorption and emission spectra, and emit light that can be efficiently detected. In addition, to support a high modulation bandwidth, the photoluminescence (PL) lifetime of the fluorophore needs to be short. In this paper, we propose a new fluorescent antenna architecture based on Förster resonance energy transfer (FRET). Our results show that, due to the photophysical interactions between the energy donor and energy acceptor, the use of FRET simultaneously increases PLQY and reduces PL lifetime. Additionally, employing FRET leads to an increased Stokes shift, ensuring that the emitted light has longer wavelengths, thus reducing self-absorption. This shift can also increase the efficiency with which the fluorescence is detected by a typical silicon (Si) photodetector. Consequently, our OWC results show that a new FRET-based antenna can achieve a significantly higher concentration gain and a wider transmission bandwidth than a conventional non-FRET antenna, leading to much higher data rates.

Leveraging Intermolecular Charge Transfer for High-Speed Optical Wireless Communication

Intermolecular charge transfer (CT) complexes have emerged as versatile platforms with customizable optical properties that play a pivotal role in achieving tunable photoresponsive materials. In this study, we introduce an innovative approach for enhancing the modulation bandwidth and net data rates in optical wireless communications (OWCs) by manipulating combinations of monomeric molecules within intermolecular CT complexes. Concurrently, we extensively investigate the intermolecular charge transfer mechanism through diverse steady-state and ultrafast time-resolved spectral techniques in the mid-infrared range complemented by theoretical calculations using density functional theory. These intermolecular CT complexes empower precise control over the -3 dB bandwidth and net data rates in OWC applications. The resulting color converters exhibit promising performance, achieving a net data rate of ∼100 Mb/s, outperforming conventional materials commonly used in the manufacture of OWC devices. This research underscores the substantial potential of engineering intermolecular charge transfer complexes as an ongoing progression and commercialization within the OWC. This carries profound implications for future initiatives in high-speed and secure data transmission, paving the way for promising endeavors in this area.

Multifunctional difluoroboron β-diketonate-based luminescent receiver for a high-speed underwater wireless optical communication system

The last decade has witnessed considerable progress in underwater wireless optical communication in complex environments, particularly in exploring the deep sea. However, it is difficult to maintain a precise point-to-point reception at all times due to severe turbulence in actual situations. To facilitate efficient data transmission, the color-conversion technique offers a paradigm shift in large-area and omnidirectional light detection, which can effectively alleviate the étendue limit by decoupling the field of view and optical gain. In this work, we investigated a series of difluoroboron β-diketonate fluorophores by measuring their photophysical properties and optical wireless communication performances. The emission colors were tuned from blue to green, and >0.5 Gb/s data transmission was achieved with individual color channel in free space by implementing an orthogonal frequency-division multiplexing (OFDM) modulation scheme. In the underwater experiment, the fluorophore with the highest transmission speed was fabricated into a 4×4 cm2 luminescent concentrator, with the concentrated emission from the edges coupled with an optical fiber array, for large-area photodetection and optical beam tracking. The net data rates of 130 Mb/s and 217 Mb/s were achieved based on nonreturn- to-zero on-off keying and OFDM modulation schemes, respectively. Further, the same device was used to demonstrate the linear light beam tracking function with high accuracy, which is beneficial for sustaining a reliable and stable connection in a dynamic, turbulent underwater environment.

Capillary-based fluorescent antenna for visible light communications

The use of fluorescent optical antennas in visible light communications (VLC) systems can enhance their performance by selectively absorbing light from the transmitter and concentrating the resulting fluorescence, whilst preserving a wide field of view. In this paper, we introduce a new and flexible way of creating fluorescent optical antennas. This new antenna structure is a glass capillary which is filled with a mixture of epoxy and a fluorophore before the epoxy is cured. Using this structure, an antenna can be easily and efficiently coupled to a typical photodiode. Consequently, the leakage of photons from the antenna can be significantly reduced when compared to previous antennas created using microscope slides. Moreover, the process of creating the antenna is simple enough for the performance of antennas containing different fluorophores to be compared. In particular, this flexibility has been used to compare VLC systems that incorporate optical antennas containing three different organic fluorescent materials, Coumarin 504 (Cm504), Coumarin 6 (Cm6), and 4-(Dicyanomethylene)-2-methyl-6-(4-dimethylaminostyryl)-4H-pyran (DCM), when a white light-emitting diode (LED) is used as the transmitter. Results show that, since it only absorbs light emitted from the gallium nitride (GaN) LED, a fluorophore that hasn't previously been used in a VLC system, Cm504, can result in a significantly higher modulation bandwidth. In addition, the bit error rate (BER) performance at different orthogonal frequency-division multiplexing (OFDM) data rates of antennas containing different fluorophores is reported. These experiments show for the first time that the best choice of fluorophore depends on the illuminance at the receiver. In particular, when the illuminance is low, the overall performance of the system is dominated by the signal-to-noise ratio (SNR). Under these conditions, the fluorophore with the highest signal gain is the best choice. In contrast, when the illuminance is high, the achievable data rate is determined by the bandwidth of the system and therefore the fluorophore that results in the highest bandwidth is the best choice.

Study of using different colors of fluorescent fibers as optical antennas in white LED based-visible light communications

A fluorescent fiber can be used as an optical antenna in visible light communication (VLC) for simultaneous optical filtering and light concentration and therefore to build a compact receiver. Since its light concentration principle is based on fluorescence, it can exceed the étendue limit and achieve both a high concentration gain and a wide field-of-view (FOV). In addition, because the photoluminescence (PL) lifetime of the fluorophore is typically only several nanoseconds, it can support high-speed data transmissions. When a fluorescent fiber antenna is used in a white light-emitting diode (LED)-based VLC system, the transmission performance highly depends on how the absorption and emission spectra of the fluorophore are associated with both the spectrum of the LED and the responsivity of the silicon photodetector. In this paper, we analyze the performance of several different commercially available fluorescent fibers. We show that, when the data rate is low or the transmission distance is long, since the light emitted from a red fluorescent fiber is associated with high silicon responsivities, it can result in high signal-to-noise ratios (SNRs) at the receiver output and therefore lead to low transmission error rates. In contrast, when the data rate is high or the transmission distance is relatively short, the bandwidth dominates the overall performance and consequently the green fluorescent fiber has better performance since it only absorbs the light emitted from the blue LED rather than the light emitted from the yellow phosphor.

Recent progress and future prospects on halide perovskite nanocrystals for optoelectronics and beyond

As an emerging new class of semiconductor nanomaterials, halide perovskite (ABX₃, X = Cl, Br, or I) nanocrystals (NCs) are attracting increasing attention owing to their great potential in optoelectronics and beyond. This field has experienced rapid breakthroughs over the past few years. In this comprehensive review, halide perovskite NCs that are either freestanding or embedded in a matrix (e.g., perovskites, metal-organic frameworks, glass) will be discussed. We will summarize recent progress on the synthesis and post-synthesis methods of halide perovskite NCs. Characterizations of halide perovskite NCs by using a variety of techniques will be present. Tremendous efforts to tailor the optical and electronic properties of halide perovskite NCs in terms of manipulating their size, surface, and component will be highlighted. Physical insights gained on the unique optical and charge-carrier transport properties will be provided. Importantly, the growing potential of halide perovskite NCs for advancing optoelectronic applications and beyond including light-emitting devices (LEDs), solar cells, scintillators and X-ray imaging, lasers, thin-film transistors (TFTs), artificial synapses, and light communication will be extensively discussed, along with prospecting their development in the future.