Hybrid sensor based on a hollow square core fiber for temperature independent refractive index detection

High-accuracy wide-range refractive index demodulation based on under-sampled fiber F-P cavity length spectrum

A scheme of fiber Fabry-Perot (F-P) cavity refractive index (RI) demodulation named under-sampled length spectrum retrieval (ULSR) is proposed. Unlike the wavelength spectrum method, ULSR can be used for physical quantity detection with just a monochromatic laser and photodetectors, avoiding the need for wideband lasers or expensive infrared spectrometers. Eight F-P cavities of different lengths were fabricated to sample the cavity length spectrum, and then the obtained under-sampled length spectrum was used to demodulate the RI of F-P cavity fillings. It was demonstrated that the ULSR system can achieve an index measurement accuracy of 1 × 10^-4 in the glucose solution index range of 1.3294-1.3746 at wavelength λ = 1.55 µm. An index demodulation with higher accuracy and wider range is expected when more than 8 F-P cavities are used. The proposed scheme, with advantages of low system complexity, low cost, high reliability, high detecting accuracy, and wide detecting range, holds great promise for facilitating the wide application of F-P cavity sensors. Additionally, ULSR liberates wavelength freedom, making it a strong candidate for multiplexed sensing based on wavelength division multiplexing.

Real-Time Measurement of Refractive Index Using 3D-Printed Optofluidic Fiber Sensor

This work describes a 3D-printed optofluidic fiber sensor to measure refractive index in real time, combining a microfluidic system with an optical fiber extrinsic Fabry-Perot interferometer. The microfluidic chip platform was developed for this purpose through 3D printing. The Fabry-Perot cavity was incorporated in the microfluidic chip perpendicularly to the sample flow, which was of approximately 3.7 µL/s. The optofluidic fiber sensor platform coupled with a low-cost optical power meter detector was characterized using different concentrations of glucose solutions. In the linear regression analysis, the optical power shift was correlated with the refractive index and a sensitivity of -86.6 dB/RIU (r² = 0.996) was obtained. Good results were obtained in terms of stability with a maximum standard deviation of 0.03 dB and a sensor resolution of 5.2 × 10^-4 RIU. The feasibility of the optofluidic fiber sensor for dynamic analyses of refractive index with low sample usage was confirmed through real-time measurements.

Optical Fiber Sensor for Monitoring the Evaporation of Ethanol–Water Mixtures

An inline optical fiber sensor is proposed to monitor in real time the evaporation process of ethanol–water binary mixtures. The sensor presents two interferometers, a cladding modal interferometer (CMI) and a Mach–Zehnder interferometer (MZI). The CMI is used to acquire the variations in the external medium refractive index, presenting a maximum sensitivity of 387 nm/RIU, and to attain the variation in the sample concentration profile, while the MZI monitors temperature fluctuations. For comparison purposes, an image analysis is also conducted to obtain the droplet profile. The sensor proposed in this work is a promising alternative in applications where a rigorous measurement of volatile organic compound concentrations is required, and in the study of chemical and physical properties related to the evaporation process.