Efficient mode exchanger-based silicon photonic switch enabled by inverse design

Multimode optical switch based on cascaded Mach-Zehnder interferometer waveguides

We present a 1 × 1 multimode optical switch for E11, E21, E12, and E22 modes based on cascaded Mach-Zehnder interferometer (MZI) waveguides, where the primary MZI is used to split E11, E21, E12, and E22 modes into E11 or E12 mode and then couple back to the original mode at the output, and the secondary MZIs are the modulation arms of the primary MZI. In addition, the secondary MZIs are designed to be mode-insensitive for switching E11 and E12 modes simultaneously. As a proof of concept, we fabricate the device with polymer material to achieve thermo-optic switching for the four modes. Our experimental device exhibits the extinction ratios of larger than 10.2 dB with a power consumption of 5.5 mW and response times of less than 1.28 ms for each mode. The presented device can be widely applied in mode-division multiplexing (MDM) systems where multimode switching is needed.

1 × 2 mode-independent polymeric thermo-optic switch based on a Mach-Zehnder interferometer with a multimode interferometer

We present the design and performances of a broadband 1 × 2 mode-independent thermo-optic (TO) switch based on Mach-Zehnder interferometer (MZI) with multimode interferometer (MMI). The MZI adopts a Y-branch structure as the 3-dB power splitter and a MMI as the coupler, which are designed to be insensitive to the guided modes. By optimizing the structural parameters of the waveguides, mode-independent transmission and switching functions for E₁₁ and E₁₂ modes can be implemented in the C + L band, and the mode content of the outputs is the same as the mode content of the inputs. We proved the working principle of our design based on polymer platform, which was fabricated by using ultraviolet lithography and wet-etching methods. The transmission characteristics for E₁₁ and E₁₂ modes were also analyzed. With the driving power of 5.9 mW, the measured extinction ratios of the switch for E₁₁ and E₁₂ modes are larger than 13.3 dB and 13.1 dB, respectively, over a wavelength range of 1530 nm to 1610 nm. The insertion losses of the device are 11.7 dB and 14.2 dB for E₁₁ and E₁₂ modes, respectively, at 1550 nm wavelength. The switching times of the device are less than 840 µs. The presented mode-independent switch can be applied in reconfigurable mode-division multiplexing systems.