1
|
Liu M, Zhao W, Wang Y, Huo P, Zhang H, Lu YQ, Xu T. Achromatic and Coma-Corrected Hybrid Meta-Optics for High-Performance Thermal Imaging. NANO LETTERS 2024; 24:7609-7615. [PMID: 38861682 DOI: 10.1021/acs.nanolett.4c01218] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/13/2024]
Abstract
Long-wave infrared (LWIR) imaging, or thermal imaging, is widely applied in night vision and security monitoring. However, the widespread use of LWIR imagers is impeded by their bulky size, considerable weight, and high cost. While flat meta-optics present a potential solution to these limitations, existing pure LWIR meta-optics face constraints such as severe chromatic or coma aberrations. Here, we introduce an approach utilizing large-scale hybrid meta-optics to address these challenges and demonstrate the achromatic, coma-corrected, and polarization-insensitive thermal imaging. The hybrid metalens doublet is composed of a metasurface corrector and a refractive lens, featuring a full field-of-view angle surpassing 20° within the 8-12 μm wavelength range. Employing this hybrid metalens doublet, we showcase high-performance thermal imaging capabilities both indoors and outdoors, effectively capturing ambient thermal radiation. The proposed hybrid metalens doublet holds considerable promise for advancing miniaturized, lightweight, and cost-effective LWIR optical imaging systems.
Collapse
Affiliation(s)
- Mingze Liu
- National Laboratory of Solid-State Microstructures, College of Engineering and Applied Sciences and Collaborative Innovation Center of Advanced Microstructures, Nanjing University, Nanjing 210093, China
- Key Laboratory of Intelligent Optical Sensing and Manipulation, Nanjing University, Nanjing 210093, China
| | - Weixing Zhao
- National Laboratory of Solid-State Microstructures, College of Engineering and Applied Sciences and Collaborative Innovation Center of Advanced Microstructures, Nanjing University, Nanjing 210093, China
- Key Laboratory of Intelligent Optical Sensing and Manipulation, Nanjing University, Nanjing 210093, China
| | - Yilin Wang
- National Laboratory of Solid-State Microstructures, College of Engineering and Applied Sciences and Collaborative Innovation Center of Advanced Microstructures, Nanjing University, Nanjing 210093, China
- Key Laboratory of Intelligent Optical Sensing and Manipulation, Nanjing University, Nanjing 210093, China
| | - Pengcheng Huo
- National Laboratory of Solid-State Microstructures, College of Engineering and Applied Sciences and Collaborative Innovation Center of Advanced Microstructures, Nanjing University, Nanjing 210093, China
- Key Laboratory of Intelligent Optical Sensing and Manipulation, Nanjing University, Nanjing 210093, China
| | - Hui Zhang
- National Laboratory of Solid-State Microstructures, College of Engineering and Applied Sciences and Collaborative Innovation Center of Advanced Microstructures, Nanjing University, Nanjing 210093, China
- Key Laboratory of Intelligent Optical Sensing and Manipulation, Nanjing University, Nanjing 210093, China
| | - Yan-Qing Lu
- National Laboratory of Solid-State Microstructures, College of Engineering and Applied Sciences and Collaborative Innovation Center of Advanced Microstructures, Nanjing University, Nanjing 210093, China
- Key Laboratory of Intelligent Optical Sensing and Manipulation, Nanjing University, Nanjing 210093, China
| | - Ting Xu
- National Laboratory of Solid-State Microstructures, College of Engineering and Applied Sciences and Collaborative Innovation Center of Advanced Microstructures, Nanjing University, Nanjing 210093, China
- Key Laboratory of Intelligent Optical Sensing and Manipulation, Nanjing University, Nanjing 210093, China
| |
Collapse
|
2
|
Shih KH, Renshaw CK. Hybrid meta/refractive lens design with an inverse design using physical optics. APPLIED OPTICS 2024; 63:4032-4043. [PMID: 38856495 DOI: 10.1364/ao.516890] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/21/2024] [Accepted: 04/23/2024] [Indexed: 06/11/2024]
Abstract
Hybrid lenses are created by combining metasurface optics with refractive optics, where refractive elements contribute optical power, while metasurfaces correct optical aberrations. We present an algorithm for optimizing metasurface nanostructures within a hybrid lens, allowing flexible interleaving of metasurface and refractive optics in the optical train. To efficiently optimize metasurface nanostructures, we develop a scalar field, ray-wave hybrid propagation method. This method facilitates the propagation of incident and derived adjoint fields through optical elements, enabling effective metasurface optimization within the framework of adjoint gradient optimization. Numerical examples of various lens configurations are presented to illustrate the versatility of the algorithm and showcase the benefits offered by the proposed approach, allowing metasurfaces to be positioned beyond the image space of a lens. Taking a F/2, 40° field-of-view, midwave infrared lens as an example, the lens exhibits an average focusing efficiency of 38% before the integration of metasurfaces. Utilizing the new algorithm to design two metasurfaces-one in the object space and one in the image space-results in significant enhancement of the average focusing efficiency to over 90%. In contrast, a counterpart design with both metasurfaces limited to the image space yields a lower average focusing efficiency of 73%.
Collapse
|
3
|
Borne J, Bouillon C, Piché M, Thibault S. Bringing metasurfaces to analytical lens design: stigmatism and specific ray mapping. OPTICS EXPRESS 2024; 32:6062-6075. [PMID: 38439317 DOI: 10.1364/oe.509944] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/20/2023] [Accepted: 01/23/2024] [Indexed: 03/06/2024]
Abstract
We propose a method to design the exact phase profile of at least one metasurface in a stigmatic singlet that can be made to implement a desired ray mapping. Following the generalized vector law of refraction and Fermat's principle, we can obtain exact solutions for the required lens shape and phase profile of a phase gradient metasurface to respect particular ray conditions (e.g., Abbe sine) as if it were a freeform refractive element. To do so, the method requires solving an implicit ordinary differential equation. We present comparisons with Zemax simulations of illustrative designed lenses to confirm the anticipated optical behaviour.
Collapse
|
4
|
Chu Y, Xiao X, Ye X, Chen C, Zhu S, Li T. Design of achromatic hybrid metalens with secondary spectrum correction. OPTICS EXPRESS 2023; 31:21399-21406. [PMID: 37381239 DOI: 10.1364/oe.493216] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/18/2023] [Accepted: 05/30/2023] [Indexed: 06/30/2023]
Abstract
Metasurface can be used in combination with singlet refractive lens to eliminate chromaticity, in which the metasurface usually works as a dispersion compensator. Such a kind of hybrid lens, however, usually has residual dispersion due to the limit of meta unit library. Here, we demonstrate a design method that considers the refraction element and metasurface together as a whole to achieve large scale achromatic hybrid lens with no residual dispersion. The tradeoff between the meta-unit library and the characteristics of resulting hybrid lenses is also discussed in detail. As a proof of concept, a centimeter scale achromatic hybrid lens is realized, which shows significant advantages over refractive lenses and hybrid lenses designed by previous methods. Our strategy would provide guidance for designing high-performance macroscopic achromatic metalenses.
Collapse
|
5
|
Hu T, Wang S, Wei Y, Wen L, Feng X, Yang Z, Zheng J, Zhao M. Design of a centimeter-scale achromatic hybrid metalens with polarization insensitivity in the visible. OPTICS LETTERS 2023; 48:1898-1901. [PMID: 37221794 DOI: 10.1364/ol.482794] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/05/2022] [Accepted: 02/04/2023] [Indexed: 05/25/2023]
Abstract
Achromatic metalenses formed using previous design methods face a compromise between diameter, numerical aperture, and working wave band. To address this problem, the authors coat the refractive lens with a dispersive metasurface and numerically demonstrate a centimeter-scale hybrid metalens for the visible band of 440-700 nm. By revisiting the generalized Snell law, a universal design of a chromatic aberration correction metasurface is proposed for a plano-convex lens with arbitrary surface curvatures. A highly precise semi-vector method is also presented for large-scale metasurface simulation. Benefiting from this, the reported hybrid metalens is carefully evaluated and exhibits 81% chromatic aberration suppression, polarization insensitivity, and broadband imaging capacity.
Collapse
|
6
|
Shih KH, Renshaw CK. Broadband metasurface aberration correctors for hybrid meta/refractive MWIR lenses: publisher's note. OPTICS EXPRESS 2022; 30:31518. [PMID: 36242231 DOI: 10.1364/oe.472482] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/03/2022] [Indexed: 06/16/2023]
Abstract
This publisher's note contains corrections to [Opt. Express30, 28438 (2022)10.1364/OE.460941].
Collapse
|