Dual-band giant spin-selective full-dimensional manipulation of graphene-based chiral meta-mirrors for terahertz waves

Switchable Terahertz Metasurfaces for Spin-Selective Absorption and Anomalous Reflection Based on Vanadium Dioxide

Conventional chiral metasurfaces are constrained by predetermined functionalities and have limited versatility. To address these constraints, we propose a novel chirality-switchable terahertz (THz) metasurface with integrated heating control circuits tailored for spin-selective anomalous reflection, leveraging the phase-change material vanadium dioxide (VO2). The reversible and abrupt insulator-to-metal phase transition feature of VO2 is exploited to facilitate a chiral meta-atom with spin-selectivity capabilities. By employing the Pancharatnam-Berry phase principle, complete 2π reflection phase coverage is achieved by adjusting the orientation of the chiral structure. At the resonant frequency of 0.137 THz, the designed metasurface achieves selective absorption of a circularly polarized wave corresponding to the state of the VO2 patches. Concurrently, it reflects the circularly polarized wave of the opposite chirality anomalously at an angle of 28.4° while maintaining its handedness. This chirality-switchable THz metasurface exhibits promising potential across various applications, including wireless communication data capacity enlargement, polarization modulation, and chirality detection.

Tunable metasurfaces for implementing terahertz controllable NOT logic gate functions

Compared with traditional electrical logic gates, optical or terahertz (THz) computing logic gates have faster computing speeds and lower power consumption, and can better meet the huge data computing needs. However, there are limitations inherent in existing optical logic gates, such as single input/output channels and susceptibility to interference. Here, we proposed a new approach utilizing polarization-sensitive graphene-vanadium dioxide metasurface THz logic gates. Benefitting from two actively tunable materials, the proposed controlled-NOT logic gate(CNOT LG) enables versatile functionality through a dual-parameter control system. This system allows for the realization of multiple output states under diverse polarized illuminating conditions, aligning with the expected input-output logic relationship of the CNOT LG. Furthermore, to demonstrate the robustness of the designed THz CNOT LG metasurface, we designed an imaging array harnessing the dynamic control capabilities of tunable meta-atoms, facilitating clear near-field imaging. This research is promising for advancing CNOT LG applications in the THz spectrum. It has potential applications in telecommunications, sensing, and imaging.

A switchable and tunable multifunctional terahertz polarization converter based on a graphene metasurface

We propose a switchable and tunable terahertz metasurface polarization converter based on graphene. The metasurface is composed of a bottom gold film, a lower SiO2 layer, an intermediate N-type graphene layer, an upper SiO2 layer, and a top layer of square graphene resonant rings. By using the CST Microwave Studio, we studied their polarization conversion properties. The results show that the metasurface enables a versatile range of functions, including x-to-y linear polarization conversion within the frequency range of 4.23-7 THz, the transformation of linearly polarized waves into right-hand circularly polarized and left-hand circularly polarized waves. Moreover, at 3.873 THz, the metasurface can exhibit circular dichroism (CD) with a high CD value of 0.7. Based on the effect, a strategy to detect three representative avian influenza viruses was proposed and tested, which implies that the metasurface can be applied in biosensing.

High-performance dual-tunable terahertz absorber based on strontium titanate and bulk Dirac semimetal for temperature sensing and switching function

In this study, a perfect metamaterial absorber based on strontium titanate and bulk Dirac semimetals is proposed. When the temperature of strontium titanate was 300K, the dual-band absorptions were 99.74% and 99.99% at 1.227 and 1.552 THz, respectively. The sensitivities based on a transverse magnetic (TM) wave were 0.95 and 1.22 GHz/K; the sensitivity based on a transverse electric (TE) wave was 0.76 GHz/K. The TE and TM waves were modulated by inserting a bulk Dirac semimetal between the concave and convex devices. The modulation depth of the TE wave was 97.9% at 1.1 THz; the extinction ratio was 16.9 dB. The modulation depth of the TE wave at 1.435 THz was 95.9%; the extinction ratio was 13.89 dB. The TM wave modulation depth at 1.552 THz was 95.9%; the extinction ratio was 13.98 dB. Irrespective of a TE or TM wave, the terahertz absorber has good switching and temperature-sensing performance based on strontium titanate and bulk Dirac semimetals as well as broad application prospects in temperature sensing and switching devices.

Near-perfect wide-band absorbers based on one-dimensional photonic crystal structures in 1-20 THz frequencies

This paper investigates the absorption behavior of one-dimensional (1D) photonic crystal (PhC) structures in the 1-20 THz region. The structures are analyzed by the transfer matrix method to achieve accurate results quickly with ordinary simulation facilities. The simulation results indicate a strong dependence of the absorber performance on the thickness and material of the PhC layers, as well as the frequency and angle of incident light. The combination of silica and titanium (Ti) materials as dielectric and metal layers presents a great choice for broadband high-absorption applications so that this structure can absorb, on average, more than 80% of the normal incident radiation in the studied frequency range. Additionally, this absorber has the lowest dependence on incident light with the angle varying from 0° to 80° compared to identical absorbers with silver, aluminum, gold, chromium, nickel, and tungsten metals. The excellent absorption feature of the Ti-based absorber compared to the other absorbers is attributed to the lower permittivity of Ti (in both real and imaginary parts) in comparison with the other metals. In addition to owning simple and fabrication-friendly structures, 1D PhCs can pave the way to achieve various absorption spectra proportional to the needs of photonics, communications, and aerospace applications.

Penrose tiling-inspired graphene-covered multiband terahertz metamaterial absorbers

In this work, we propose two different graphene-covered nanostructured metamaterial absorbers inspired by Penrose tiling. These absorbers allow spectrally tunable absorption within the terahertz spectrum corresponding to 0.2-20 THz. We have conducted finite-difference time-domain analyses to determine the tunability of these metamaterial absorbers. The proposed structures, Penrose models 1 and 2, perform differently from each other due to their design characteristics. Penrose model 2 reaches a perfect absorption at 8.58 THz. In addition, the relative absorption bandwidth calculated at full-wave at half-maximum in Penrose model 2 varies between 5.2% and 9.4%, which characterizes the metamaterial absorber as a wideband absorber. Also, we can observe that as we increase the Fermi level of graphene from 0.1 to 1 eV, the absorption bandwidth and relative absorption bandwidth both increase. Our findings show the high tunability of both models through varying graphene's Fermi level, the graphene's thickness, the substrate's refractive index, and the proposed structures' polarization. We can further observe multiple tunable absorption profiles that may find applications in designer infrared absorbers, optoelectronic devices, and THz sensors.

Terahertz polarization and chirality modulation induced by asymmetry inversion combining chiral metasurface and liquid crystal anisotropy

We experimentally demonstrate a dynamic terahertz (THz) chiral device based on a composite structure of anisotropic liquid crystals (LCs) sandwiched between a bilayer metasurface. The device supports the symmetric mode and antisymmetric mode under the incidence of left- and right-circular polarized waves, respectively. The different coupling strengths of the two modes reflect the chirality of the device, and the anisotropy of the LCs can change the coupling strength of the modes, which brings tunability to the chirality of the device. The experimental results show that the circular dichroism of the device can be dynamically controlled from 28 dB to -32 dB (i.e., inversion regulation) at approximately 0.47 THz and from -32 dB to 1 dB (i.e., switching regulation) at approximately 0.97 THz. Moreover, the polarization state of the output wave is also tunable. Such flexible and dynamic manipulation of THz chirality and polarization might build an alternative pathway for complex THz chirality control, high-sensitivity THz chirality detection, and THz chiral sensing.

Tunable wideband-narrowband switchable absorber based on vanadium dioxide and graphene

A functionally tunable and absorption-tunable terahertz (THz) metamaterial absorber based on vanadium dioxide (VO₂) and graphene is proposed and verified numerically. Based on phase transition properties of VO₂ and tunability of graphene, the switching performance between ultra-broadband and narrow-band near-perfect absorption can be achieved. We simulate and analyze the characteristics of the constructed model by finite element analysis. Theoretical calculations show that when VO₂ is in the metallic state and the graphene Fermi energy is 0 eV, the designed absorber can perform ultra-broadband absorption. The absorber achieves greater than 95% absorption in the 2.85 - 10THz range. When VO₂ is in the insulating state and the graphene Fermi energy is 0.7 eV, more than 99.5% absorption can be achieved at 2.3 THz. The absorption rate can be tuned by changing the conductivity of VO₂ and the Fermi energy of graphene. Moreover, the proposed absorber displays good polarization insensitivity and wide incident angle stability. The design may have potential applications in terahertz imaging, sensing, electromagnetic shielding and so on.

Dynamically electrical/thermal-tunable perfect absorber for a high-performance terahertz modulation

We present a high-performance functional perfect absorber in a wide range of terahertz (THz) wave based on a hybrid structure of graphene and vanadium dioxide (VO₂) resonators. Dynamically electrical and thermal tunable absorption is achieved due to the management on the resonant properties via the external surroundings. Multifunctional manipulations can be further realized within such absorber platform. For instance, a wide-frequency terahertz perfect absorber with the operation frequency range covering from 1.594 THz to 3.272 THz can be realized when the conductivity of VO₂ is set to 100000 S/m (metal phase) and the Fermi level of graphene is 0.01 eV. The absorption can be dynamically changed from 0 to 99.98% and in verse by adjusting the conductivity of VO₂. The impedance matching theory is introduced to analyze and elucidate the wideband absorption rate. In addition, the absorber can be changed from wideband absorption to dual-band absorption by adjusting the Fermi level of graphene from 0.01 eV to 0.7 eV when the conductivity of VO₂ is fixed at 100000 S/m. Besides, the analysis of the chiral characteristics of the helical structure shows that the extinction cross-section has a circular dichroic response under the excitation of two different circularly polarized lights (CPL). Our study proposes approaches to manipulate the wide-band terahertz wave with multiple ways, paving the way for the development of technologies in the fields of switches, modulators, and imaging devices.

Individually tunable array reflector for amplitude and phase modulation

Based on graphene's phase modulation property and vanadium dioxide's amplitude modulation property, we developed an array reflector for terahertz frequencies that is individually adjustable. Starting with a theoretical analysis, we look into the effects of voltage on the Fermi level of graphene and temperature on the conductivity of vanadium dioxide, analyze the beam focusing characteristics, and finally link the controllable quantities with the reflected beam characteristics to independently regulate each cell in the array. The simulation findings demonstrate that the suggested array structure can precisely manage the focus point's position, intensity, and scattering degree and that, with phase compensation, it can control the wide-angle incident light. The array structure offers a novel concept for adjustable devices and focusing lenses, which has excellent potential for study and application.

Dual-controlled tunable dual-band and ultra-broadband coherent perfect absorber in the THz range

This paper proposes a vanadium dioxide metamaterial-based tunable, polarization-independent coherent perfect absorber (CPA) in the terahertz frequency range. The designed CPA demonstrates intelligent reconfigurable switch modulation from an ultra-broadband absorber mode to a dual-band absorber mode via the thermally controlled of VO₂. The mode of ultra-broadband absorber is realized when the conductivity of VO₂ reaches 11850 S/m via controlling its temperature around T = 328 K. In this mode, the CPA demonstrates more than 90% absorption efficiency within the ultra-wide frequency band that extends from 0.1 THz to 10.8 THz. As the conductivity of VO₂ reaches 2×10⁵ S/m (T = 340 K), the CPA switches to a dual-band absorber mode where a relatively high absorption efficiency of 98% and 99.7% is detected at frequencies of 4.5 THz and 9.8 THz, respectively. Additionally, using phase modulation of the incident light, the proposed CPA can regulate the absorption efficiency, which can be intelligently controlled from perfect absorption to high pass-through transmission. Owing to the ability of the proposed CPA to intelligently control the performance of light, this study can contribute towards enhancing the performance of stealth devices, all-optical switches and coherent photodetectors.

Tune the resonance of VO2 joined metamaterial dimers by adjacent cut wires

Two terahertz metamaterials were joined by a conductivity variable VO₂ patch to obtain a metamaterial dimer. By applying voltage or heat to the VO₂ patches, active modulation of terahertz wave could be achieved. A cut-wire metamaterial was placed adjacent to the VO₂ joined dimer to affect its electromagnetic response. It was found that the cut wire could heavily impact the resonance mode of the VO₂ joined dimer, which gives dual resonance dips in transmission spectrum for both insulating and conducting states of VO₂ patches. As a result, by tuning the conductivity of VO₂, active dual band phase modulation could be achieved with high transmission window by this dimer-cut wire coupling system.

Three-stimulus control ultrasensitive Dirac point modulator using an electromagnetically induced transparency-like terahertz metasurface with graphene

This letter presents a fabricated Dirac point modulator of a graphene-based terahertz electromagnetically induced transparency (EIT)-like metasurface (GrE & MS). Dynamic modulation is realized by applying three stimulus modes of optical pump, bias voltage, and optical pump-bias voltage combination. With increasing luminous flux or bias voltage, the transmission amplitude undergoes two stages: increasing and decreasing, because the graphene Fermi level shifts between the valence band, Dirac point, and conduction band. Thus, an approximate position of the Dirac point can be evaluated by the transmission spectrum fluctuation. The maximum modulation depth is measured to be 182% under 1 V. These findings provide a method for designing ultrasensitive terahertz modulation devices.