Microbubble-based optical fiber Fabry-Perot sensor for simultaneous high-pressure and high-temperature sensing

Enhanced sensitivity of temperature and magnetic field sensor based on FPIs with Vernier effect

A kind of temperature and magnetic field sensor using Fabry-Perot interferometers (FPIs) and Vernier effect to enhance sensitivity is proposed. The sensor structure involves filling the FP air cavities with polydimethylsiloxane (PDMS) and magnetic fluid (MF) to create the PDMS and MF cavities for temperature and magnetic field detection, respectively. The two cavities are reflective structures, which are interconnected in series through a fiber-optic circulator. Experimental data demonstrates that the Vernier effect effectively enhances the sensor sensitivity. The average temperature sensitivity of the sensor is 26765 pm/°C within the range of 35∼39.5°C. The magnetic field intensity sensitivity is obtained to be -2245 pm/mT within the range of 3∼11 mT. The sensitivities of the temperature and magnetic field using the Vernier effect are about five times larger than those of the corresponding single FP cavity counterparts.

PDMS-filled micro-spring Fabry-Perot cavity for temperature sensing

A highly sensitive fiber-tipped temperature sensor based on polydimethylsiloxane (PDMS)-filled spring Fabry-Perot (FP) cavity has been proposed and experimentally demonstrated. The spring FP cavity is first fabricated on the fiber endface by the two-photon polymerization lithography. After that, PDMS is filled into the cavity to drive the elongation of the flexible spring and thus to functionalize high-performance temperature sensing. Benefiting from the large thermal expansion coefficient of PDMS, the proposed sensor exhibits a maximal temperature sensitivity of 704.3 pm/°C with excellent operating repeatability and stability. Besides, by selecting a proper spring constant k, the FP sensitivity can be precisely adjusted in the range of 100-700 pm/°C. Thanks to the advantages of high fabrication accuracy and designable property, the proposed sensor could promote numerous usages for customizable temperature sensing.

Transmissive fluorescent temperature sensor based on Er3+/Yb3+/Mo6+ tri-doped tellurite fiber for real-time thermal monitoring of motors using the FIR technique

In this paper, we fabricate a transmissive fluorescent temperature sensor (TFTS) that based on Er3+/Yb3+/Mo6+ tri-doped tellurite fiber, which has the advantages of compactness and simplicity, corrosion resistance, high stability and anti-electromagnetic interference. The doping of Mo6+ ions will enhance the up-conversion (UC) fluorescence emission efficiency of Er3+ ions, thus improving the signal-to-noise ratio of TFTS. Using the fluorescence intensity ratio (FIR) technique, the real-time thermal monitoring performance of TFTS is evaluated experimentally. Apart from good stability, its maximum relative sensitivity is 0.01068 K-1 at 274 K in the measured temperature range. In addition, it is successfully used to monitor the temperature variation of the stator core and stator winding of the motor in actual operation. The results show that the maximum error between the FIR-demodulated temperature and the reference temperature is less than 1.2 K, which fully confirms the effectiveness of the TFTS for temperature monitoring. Finally, the FIR-based TFTS in this work is expected to provide a new solution for accurate and real-time thermal monitoring of motors and the like.