Broadband coherent perfect absorption employing an inverse-designed metasurface via genetic algorithm

A broadband modulator based on graphene/black phosphorus heterostructure with enhanced modulation depth

We theoretically present a broadband modulator based on graphene/black phosphorus heterostructure which can work over a large waveband from visible (VIS) to mid-infrared (MIR) regions. By utilizing the angle dependence of black phosphorus, surface plasmon polaritons (SPP) modulation can be achieved in VIS regime, while the wavelength is tuned within the near-infrared (NIR) or MIR regions, the enhanced modulation depth can be achieved by few-layer graphene films. Results show that the proposed plasmonic modulator exhibits a broad waveband from 400 nm to 3 μm. In addition, this proposed modulator features high modulation depth (MD), low insertion loss (IL), large 3-dB modulation bandwidth and small power consumption from VIS to MIR regions. Our work may extend the operation waveband of opto-electro devices based on the hybridized 2D materials and would promote their potential future applications.

Inverse design of omnidirectional coherent absorbers for optical power beaming applications

An efficient photovoltaic power converter is a critical element in laser power beaming systems for maximizing the end-to-end power transfer efficiency while minimizing beam reflections from the receiver for safety considerations. We designed a multilayer absorber that can efficiently trap monochromatic light from broad incident angles. The proposed design is built on the concept of a one-way coherent absorber with inverse-designed aperiodic multilayer front- and back-reflectors that enable maximal optical absorption in a thin-film photovoltaic material for broad angles. We argue that the broad bandwidth is achieved through an optimization search process that automatically engineers the modal content of the cavity to create multiple overlapping resonant modes at the desired angle or frequency range. A realistic design is provided based on GaAs thin films with inverse-designed multilayer binary AlAs/AlGaAs mirrors. The proposed device can pave the way for efficient optical power beaming systems.

Three-Layered Thin Films for Simultaneous Infrared Camouflage and Radiative Cooling

With the rapid advancements in aerospace technology and infrared detection technology, there are increasing needs for materials with simultaneous infrared camouflage and radiative cooling capabilities. In this study, a three-layered Ge/Ag/Si thin film structure on a titanium alloy TC4 substrate (a widely used skin material for spacecraft) is designed and optimized to achieve such spectral compatibility by combining the transfer matrix method and the genetic algorithm. The structure exhibits a low average emissivity of 0.11 in the atmospheric windows of 3-5 μm and 8-14 μm for infrared camouflage and a high average emissivity of 0.69 in 5-8 μm for radiative cooling. Furthermore, the designed metasurface shows a high degree of robustness regarding the polarization and incidence angle of the incoming electromagnetic wave. The underlying mechanisms allowing for the spectral compatibility of the metasurface can be elucidated as follows: the top Ge layer selectively transmits electromagnetic waves ranging from 5-8 μm while it reflects those in the ranges of 3-5 μm and 8-14 μm. The transmitted electromagnetic waves from the Ge layer are first absorbed by the Ag layer and then localized in the Fabry-Perot resonance cavity formed by Ag layer, Si layer and TC4 substrate. Ag and TC4 make further intrinsic absorptions during the multiple reflections of the localized electromagnetic waves.

Utilization of smartphones for the evaluation of Gr/Ni nanostructures magnetically controlled based on optical fibers surface plasmons

In the suggested optical fiber-based magnetoplasmonic system, we investigated the magnetic properties of graphene/nickel nanostructures. The plasmonic mode changes under the magnetic field observed in the intensity diagrams over time. To be accessible, cheap, and portable, we used a smartphone as a detector and processor. Considering the ambient noise and the light source, it was reported that the intensity of the changes improved up to 5 times. Further, the clad corrosion experiment carried out by pure dimethyl ketone in an intensity modulation by a smartphone camera and 10 seconds suggested removing fluorine polymer clad.

Multiple plasmon-induced transparency based on black phosphorus and graphene for high-sensitivity refractive index sensing

A hybrid bilayer black phosphorus (BP) and graphene structure with high sensitivity is proposed for obtaining plasmon-induced transparency (PIT). By means of surface plasmon resonance in the rectangular-ring BP structure and ribbon graphene structure, a PIT effect with high refractive index sensitivity is achieved, and the surface plasmon hybridization between graphene and anisotropic BP is analyzed theoretically. Meanwhile, the PIT effect is quantitatively described using the coupled oscillator model and the strong coherent coupling phenomena are analyzed by adjusting the coupling distance between BP and graphene, the Fermi level of graphene, and the crystal orientation of BP, respectively. The simulation results show that the refractive index sensitivity S = 7.343 THz/RIU has been achieved. More importantly, this is the first report of tunable PIT effects that can produce up to quintuple PIT windows by using the BP and graphene hybrid structure. The high refractive index sensitivity of the quintuple PIT system for each peak is 3.467 THz/RIU, 3.467 THz/RIU, 3.600 THz/RIU, 4.267 THz/RIU, 4.733 THz/RIU and 6.133 THz/RIU, respectively, which can be used for multiple refractive index sensing function.