Design, analysis and optimization of a waveguide-type near-eye display using a pin-mirror array and a concaved reflector

Extended depth of field in augmented reality

The 3D display device shows an image with depth information. Conventional 3D display devices based on binocular parallax can focus accurately only on the depth of a specific screen. Because the human eye has a narrow depth of field (DOF) under normal circumstances, 3D displays that provide a relatively wide range of virtual depth areas have limitations on the DOF where clear 3D images are seen. To resolve this problem, it is necessary to find the optical conditions to extend the DOF and analyze the phenomena related to it. For this, by using the Rayleigh criterion and the Strehl ratio, a criterion for this extension of the DOF is suggested. A practical optical structure that can effectively extend the DOF is devised using a flat panel display. This optical structure could be applied to AR, VR, and MR in the field of near-eye displays. From the results of this research, the fundamental optical conditions and standards are proposed for 3D displays that will provide 3D images with extended DOF in the future. Furthermore, it is also expected that these conditions and criteria can be applied to optical designs for the required performance in the development of 3D displays in various fields.

Super multi-view near-eye virtual reality with directional backlights from wave-guides

Directional backlights have often been employed for generating multiple view-zones in three-dimensional (3D) display, with each backlight converging into a corresponding view-zone. By designing the view-zone interval for each pupil smaller than the pupil's diameter, super multi-view (SMV) can get implemented for a VAC-free 3D display. However, expanding the backlight from a light-source to cover the corresponding display panel often needs an extra thickness, which results in a thicker structure and is unwanted by a near-eye display. In this paper, two wave-guides are introduced into a near-eye virtual reality (NEVR) system, for sequentially guiding more than one directional backlight to each display panel for SMV display without bringing obvious extra thickness. A prototype SMV NEVR gets demonstrated, with two backlights from each wave-guide converging into two view-zones for a corresponding pupil. Although the additional configured light-sources are positioned far from the corresponding wave-guide in our proof-of-concept prototype, multiple light-sources can be attached to the corresponding wave-guide compactly if necessary. As proof, a 3D scene with defocus-blur effects gets displayed. The design range of the backlights' total reflection angles in the wave-guide is also discussed.