Sub-ppm gas phase Raman spectroscopy in an anti-resonant hollow core fiber

Parabolic mirror cavity-enhanced Raman spectroscopy for trace gas detection

A parabolic mirror cavity-enhanced Raman spectroscopy (PM-CERS) method was reported, utilizing a combined optical path of a parabolic mirror and a multi-pass cell. In this setup, the focal point of the parabolic mirror is aligned with the laser convergence center of the multi-pass cell. This method achieved high excitation intensity at the focal point and broadened the collection range of Raman scattering signals, thus significantly improving both the excitation and collection efficiency of Raman signals. Additionally, the structure of the system was simplified through the integrated design of the collection cavity and sample cell. Nitrogen, oxygen, water vapor, and carbon dioxide could be detected in the air within an exposure time of just 0.5 s, achieving the limits of detection at the ppm level. Compared to the conventional multi-pass cell, the signal intensity and signal-to-noise ratio were each enhanced by approximately 5.6-fold, further demonstrating the excellent potential application in trace gas detection.

Ultrasensitive Raman Gas Spectroscopy for Dinitrogen Sensing at the Parts-per-Billion Level

Sensing small changes in the concentration of dinitrogen (N2) is a difficult analytical task. As N2-sensing is crucial for nitrogen cycle research in general and studies of denitrification in particular, researchers went to great lengths to develop techniques like the gas-flow-soil-core method, which achieves a precision of 200 ppb at 20 ppm of N2. Here, we present a Raman gas spectroscopic technique based on high pressure, high laser power, and high-NA signal collection, which achieves a limit of detection (LoD) of 59 ppb N2 and a precision of 27 ppb at 10 ppm of N2. This improves the lowest LoD for N2 reported for Raman gas spectroscopy by 2 orders of magnitude. Furthermore, this constitutes an improvement in precision by 1 order of magnitude compared to the GC-MS-based gas-flow-soil-core method currently established in denitrification research. We show that the presented setup is both stable and tight enough to ensure highly sensitive, precise, and repeatable measurements of N2. As Raman gas spectroscopy is a versatile and comprehensive method, the described technique could be easily expanded to other relevant gases like nitrous oxide or to simultaneous multigas sensing. In summary, our method offers possibilities for N2-sensing and could eventually enable denitrification studies with increased sensitivity and a larger scope.

Anti-resonant hollow core fiber with excellent bending resistance in the visible spectral range

The development of wideband guided hollow-core anti-resonant fiber (HC-ARF) that covers the sensitive range of the human eye's visible spectrum is progressing rapidly. However, achieving low-loss wideband transmission with a small bending radius remains a challenging issue to be addressed. In light of this, we propose a novel, to our knowledge, HC-ARF with a nested double-semi-elliptical cladding structure in the visible spectral region. By employing finite element method simulations, we investigate the confinement loss, bending loss, and single-mode performance of this fiber design. The result shows that the confinement loss of this new fiber exhibits below 10-5 dB·m-1 across almost the entire visible band range, with a minimum loss of 1.55 × 10-7 dB·m-1 achieved for λ = 650 nm. Furthermore, this fiber demonstrates excellent resistance to bending and can maintain an ultra-low bending loss as low as 3 × 10-7 dB·m-1 even under extreme bending conditions with a radius of only 3 cm. Notably, its 3-dB bending radius reaches just 3.5 cm for λ = 532 nm. Additionally, it exhibits outstanding single-mode conductivity under various bending scenarios and achieves a high extinction ratio of up to 104 for higher-order modes after parameter optimization for specific wavelengths.

Three stage HCF fabrication technique for high yield, broadband UV-visible fibers

Hollow-core optical fibers can offer broadband, single mode guidance in the UV-visible-NIR wavelength range, with the potential for low-loss, solarization-free operation, making them desirable and potentially disruptive for a wide range of applications. To achieve this requires the fabrication of fibers with <300nm anti-resonant membranes, which is technically challenging. Here we investigate the underlying fluid dynamics of the fiber fabrication process and demonstrate a new three-stage fabrication approach, capable of delivering long (∼350m) lengths of fiber with the desired thin-membranes.

A New Gas Analysis Method Based on Single-Beam Excitation Stimulated Raman Scattering in Hollow Core Photonic Crystal Fiber Enhanced Raman Spectroscopy

We previously developed a hollow-core photonic crystal fiber (HCPCF) based Raman scattering enhancement technique for gas/human breath analysis. It enhances photon-gas molecule interactions significantly but is still based on CW laser excitation spontaneous Raman scattering, which is a low-probability phenomenon. In this work, we explored nanosecond/sub-nanosecond pulsed laser excitation in HCPCF based fiber enhanced Raman spectroscopy (FERS) and successfully induced stimulated Raman scattering (SRS) enhancement. Raman measurements of simple and complex gases were performed using the new system to assess its feasibility for gas analysis. We studied the gas Raman scattering characteristics, the relationship between Raman intensities and pump energies, and the energy threshold for the transition from spontaneous Raman scattering to SRS. H2, CO2, and propene (C3H6) were used as test gases. Our results demonstrated that a single-beam pulsed pump combined with FERS provides an effective Raman enhancement technique for gas analysis. Furthermore, an energy threshold for SRS initiation was experimentally observed. The SRS-capable FERS system, utilizing a single-beam pulsed pump, shows great potential for analyzing complex gases such as propene, which is a volatile organic compound (VOC) gas, serving as a biomarker in human breath for lung cancer and other human diseases. This work contributes to the advancement of gas analysis and opens alternative avenues for exploring novel Raman enhancement techniques.