Single-cavity dual-modelocked 2.36-µm laser

Upconversion-pumped femtosecond thulium laser at 2309 nm mode-locked by a GaSb-based SESAM

We report on a femtosecond thulium laser operating on the 3H4 → 3H5 transition with upconversion pumping around 1 µm and passively mode-locked by a GaSb-based SEmiconductor Saturable Absorber Mirror (SESAM). This laser employs a 6 at.% Tm:LiYF4 laser crystal and a polarization maintaining Yb-fiber master oscillator power amplifier at 1043 nm as a pump source addressing the 3F4 → 3F2,3 excited-state absorption transition of Tm3+ ions. In the continuous-wave regime, the Tm-laser generates 616 mW at ∼2313 nm with a slope efficiency of 10.0% (vs. the incident pump power) and a linear polarization (π). By implementing a type-I SESAM with a single ternary strained In0.33Ga0.67Sb quantum well embedded in GaSb for sustaining and stabilizing the soliton pulse shaping, the self-starting mode-locked Tm-laser generated pulses as short as 870 fs at a central wavelength of 2309.4 nm corresponding to an average output power of 208 mW at a pulse repetition rate of 105.08 MHz and excellent mode-locking stability. The output power was scaled to 450 mW at the expense of a longer pulse duration of 1.93 ps. The nonlinear parameters of the SESAM are also reported.

Gigahertz semiconductor laser at a center wavelength of 2 µm in single and dual-comb operation

Dual-comb lasers are a new class of ultrafast lasers that enable fast, accurate and sensitive measurements without any mechanical delay lines. Here, we demonstrate a 2-µm laser called MIXSEL (Modelocked Integrated eXternal-cavity Surface Emitting Laser), based on an optically pumped passively modelocked semiconductor thin disk laser. Using III-V semiconductor molecular beam epitaxy, we achieve a center wavelength in the shortwave infrared (SWIR) range by integrating InGaSb quantum well gain and saturable absorber layers onto a highly reflective mirror. The cavity setup consists of a linear straight configuration with the semiconductor MIXSEL chip at one end and an output coupler a few centimeters away, resulting in an optical comb spacing between 1 and 10 GHz. This gigahertz pulse repetition rate is ideal for ambient pressure gas spectroscopy and dual-comb measurements without requiring additional stabilization. In single-comb operation, we generate 1.5-ps pulses with an average output power of 28 mW, a pulse repetition rate of 4 GHz at a center wavelength of 2.035 µm. For dual-comb operation, we spatially multiplex the cavity using an inverted bisprism operated in transmission, achieving an adjustable pulse repetition rate difference estimated up to 4.4 MHz. The resulting heterodyne beat reveals a low-noise down-converted microwave frequency comb, facilitating coherent averaging.