High-repetition-rate and high-beam-quality all-solid-state nanosecond pulsed deep-red Raman laser

High average power and high repetition rate eye-safe Raman laser driven by a two-crystal Nd:YVO4 laser

We report on a high average power and high repetition rate nanosecond pulsed eye-safe KGW Raman laser intracavity driven by an acousto-optic Q-switched 1342 nm two-crystal Nd:YVO4 laser. Taking advantages of the carefully selected two-composite-laser-crystal configuration, the thoroughly optimized gate-open time of acousto-optic modulator and the ingeniously designed U-shaped resonator, substantial power and efficiency enhancements as well as superior mode matching have been enabled. Under the injected pump power of 64.5 W, the average output powers of the first-Stokes fields at 1496 and 1527 nm can be up to 8.1 and 9.5 W with 25 kHz repetition rate and 3.2 µs gate-open time, respectively, corresponding to the optical power conversion efficiencies of 12.6% and 14.7%. Meantime, the resultant pulse widths are determined to be 4.6 and 6.3 ns with the peak powers of approximately 70 and 60 kW, respectively. The beam quality can be maintained with M2 < 1.5 across the entire output power range.

Intracavity frequency doubling acousto-optic Q-switched high repetition rate high-energy Nd:YLF laser

The ongoing advancement of Ti:sapphire femtosecond laser technology has drawn increasing attention to high repetition rate, high-energy green lasers as ideal pump sources for Ti:sapphire regenerative amplifiers. This study employed a neodymium-doped yttrium lithium fluoride (Nd:YLF) as the gain medium, supplemented with side-pumped laser diodes, acousto-optic Q-switching, and intracavity frequency doubling technologies. The results demonstrated a repetition rate ranging from 1-10 kHz, a pulse width of less than 100 ns, and a single pulse energy exceeding 50 mJ at 527 nm green light output. Furthermore, an operating stability (RMS) of ≤0.15% was maintained for 14 h at a repetition rate of 1 kHz and an output power of 40 W.

Ten-watt-level all-solid-state eye-safe intracavity Raman laser

We demonstrate the first ten-watt-level eye-safe intracavity crystalline Raman laser, to the best of our knowledge. The efficient high-power eye-safe Raman laser is intracavity-pumped by an acousto-optically Q-switched 1314 nm two-crystal Nd:YLF laser. Benefiting from the unique bi-axial properties of KGW crystal, two sets of eye-safe dual-wavelength Raman lasers operating at 1461, 1645 nm and 1490, 1721nm are achieved by rotating the Raman crystal. Under the launched pump power of 84.9 W and the repetition rate of 4 kHz, the maximum first-Stokes output powers of 7.9 W at 1461 nm and 8.2 W at 1490 nm are acquired with the second-Stokes output powers of 1.4 W at 1645 nm and 1.5 W at 1721nm, respectively, leading to the eye-safe dual-wavelength Raman output powers of up to 9.3 and 9.7 W. Meanwhile, the pulse durations at the wavelengths of 1461, 1490, 1645, 1721nm are determined to be 4.8, 5.5, 4.3, and 3.6 ns, respectively, which give rise to the peak powers approaching about 410, 370, 80, 100 kW. These Stokes emissions are found to be near diffraction limited with M2 < 1.6 across the entire output power range.