All-fiber-optic remote sensing of temperature employing interferometric techniques

Use of liquid-crystal-clad fiber as a modal filter for a two-mode fiber-optic interferometer

A novel two-mode fiber-optic interferometer employing a liquid-crystal-clad fiber as a modal filter is proposed. The liquid-crystal-clad fiber can guide one of the second-order modes, TE01, and leak out the other TM01 and HE21 modes. Thus two spatial modes, fundamental mode HE11 and second-order mode TE01 serve as the two arms of the interferometer to detect an external perturbation. The experimental results obtained when this interferometer was used to sense temperatures ranging from 20 to 100 degrees C are demonstrated.

Multiplexed, white-light interferometric fiber-optic sensor matrix with a long-cavity, Fabry-Perot resonator

A long-cavity, single-mode, fiber-optic Fabry-Perot resonator has been used to develop white-light fiberoptic multiplexed Michelson interferometers (MMIs). The MMI matrix is constructed and demonstrated. We also analyzed the capacity of the long-cavity Fabry-Perot resonator multiplexing technique. The experimental results of a 2 x 2 fiber-optic interferometric sensor matrix are given, and the effects of polarization are discussed.

First in-vivo trials of a fiber Bragg grating based temperature profiling system

We describe the results of in-vivo trials of a portable fiber Bragg grating based temperature profile monitoring system. The probe incorporates five Bragg gratings along a single fiber and prevents the gratings from being strained. Illumination is provided by a superluminescent diode, and a miniature CCD based spectrometer is used for demultiplexing. The CCD signal is read into a portable computer through a small A/D interface; the computer then calculates the positions of the center wavelengths of the Bragg gratings, providing a resolution of 0.2 degree C. Tests were carried out on rabbits undergoing hyperthermia treatment of the kidney and liver via inductive heating of metallic implants and comparison was made with a commercial Fluoroptic thermometry system.

Fiber-optic temperature sensing with ultrathin silicon étalons

We report fiber-optic temperature sensing with an optically thin silicon étalon. A simple fabrication technique by direct deposition of silicon onto the fiber tip, a wide range of operating wavelengths from 1500 nm down to 800 nm, and the applicability for temperature sensing well above 400 degrees C are the most prominent features of the silicon étalon sensor.