125-TW Ti:sapphire/Nd:glass laser system

Acquiring 1053 nm femtosecond laser emission by optical parametric amplification based on supercontinuum white-light injection

We report a terawatt-Ti:sapphire-laser-pumped high-energy femtosecond optical parametric amplifier (OPA) with supercontinuum white-light injection. Signal pulses with a duration less than 100 fs and energy up to 4 mJ are obtained with large-aperture LiNbO3 crystals. This megajoule-class femtosecond OPA at 1053 nm presents a feasible alternative to optical parametric chirped-pulse amplification and is ready to be applied to petawatt lasers.

Evaluation of an ultrabroadband high-gain amplification technique for chirped pulse amplification facilities

Recently, an amplification technique for ultrashort pulses was explored in detail in a theoretical paper by Ross et al. [Opt. Commun. 144, 125 (1997)]. The technique, based on nonlinear optics, is called optical parametric chirped pulse amplification. It has a number of features that, in principle, make it highly attractive. It primarily offers extremely large gains simultaneously with extremely large bandwidths. Additional attractions are virtually no spatial and temporal phase distortion of the amplified pulse, high efficiencies and a low thermal loading, reduced amplified spontaneous emission levels, small optical material lengths, and an inherent simplicity of implementation. We present an evaluation of the technique as a front end amplifier for the ultrashort pulse amplification chain of the Vulcan laser system. Such a device could replace some of the existing amplification in Nd:glass and additionally have a wider effect as a direct replacement of Ti:sapphire regenerative amplifiers on large-scale chirped pulse amplification scale facilities.

Generation of 160-ps terawatt-power CO(2) laser pulses

We have developed a three-stage CO(2) master-oscillator-amplifier system that produces 1.1 TW of peak power. The system generates 170 J of energy in a diffraction-limited 160+/-10ps pulse on the 10P(20) line. We also report the realization of a two-wavelength terawatt-peak-power CO(2) laser that can be tuned to an arbitrary pair of lines. A two-stage semiconductor switching system driven by a picosecond-pulse Nd:YAG laser was used to slice a short, low-power 10.6-mum pulse for amplification. A simple plasma shutter helped to compensate for gain narrowing in a final three-pass amplifier and to shorten the pulse.

Petawatt laser pulses

We have developed a hybrid Ti:sapphire-Nd:glass laser system that produces more than 1500 TW (1.5 PW) of peak power. The system produces 660 J of power in a compressed 440+/-20 fs pulse by use of 94-cm master diffraction gratings. Focusing to an irradiance of >7x10(20) W/cm (2) is achieved by use of a Cassegrainian focusing system employing a plasma mirror.

100-TW sub-20-fs Ti:sapphire laser system operating at a 10-Hz repetition rate

We developed a compact three-stage Ti:sapphire amplifier laser system that produced peak power in excess of 100 TW for a pulse duration of less than 19 fs and an average power of 19 W at a 10-Hz repetition rate. A final 40-mm-diameter Ti:sapphire amplifier is pumped by a Nd:YAG master-oscillator-power-amplifier system that produces ~7-J output of 532-nm radiation. The spatial beam quality is approximately 2 times diffraction limited for the full amplified compressed output pulse. With f/3 optics, this system should therefore be capable of producing a focused intensity of ~3x10(20) W/cm(2) .