Enhanced optical limiting performance of a nonlinear absorber in a solution containing scattering nanoparticles

Plasmonic nanoparticles embedded in single crystals synthesized by gold ion implantation for enhanced optical nonlinearity and efficient Q-switched lasing

We report on the synthesis of embedded gold (Au) nanoparticles (NPs) in Nd:YAG single crystals using ion implantation and subsequent thermal annealing. Both linear and nonlinear absorption of the Nd:YAG crystals have been enhanced significantly due to the embedded Au NPs, which is induced by the surface plasmon resonance (SPR) effect in the visible light wavelength band. Particularly, through a typical Z-scan system excited by a femtosecond laser at 515 nm within the SPR band, the nonlinear absorption coefficients of crystals with Au NPs have been observed to be nearly 5 orders of magnitude larger than that without Au NPs. This giant enhancement of nonlinear absorption properties is correlated with the saturable absorption (SA) effect, which is the basis of passive Q-switching or mode-locking for pulsed laser generation. In addition, the linear and nonlinear absorption enhancement could be tailored by varying the fluence of implanted Au⁺ ions, corresponding to the NP size and concentration modulation. Finally, the Nd:YAG wafer with embedded Au NPs has been applied as a saturable absorber in a Pr:LuLiF₄ crystal laser cavity, and efficient pulsed laser generation at 639 nm has been realized, which presents superior performance to the MoS₂ saturable absorber based system. This work opens an avenue to enhance and modulate the nonlinearities of dielectrics by embedding plasmonic Au NPs for efficient pulsed laser operation.

Nonlinear Optical Materials for the Smart Filtering of Optical Radiation

The control of luminous radiation has extremely important implications for modern and future technologies as well as in medicine. In this Review, we detail chemical structures and their relevant photophysical features for various groups of materials, including organic dyes such as metalloporphyrins and metallophthalocyanines (and derivatives), other common organic materials, mixed metal complexes and clusters, fullerenes, dendrimeric nanocomposites, polymeric materials (organic and/or inorganic), inorganic semiconductors, and other nanoscopic materials, utilized or potentially useful for the realization of devices able to filter in a smart way an external radiation. The concept of smart is referred to the characteristic of those materials that are capable to filter the radiation in a dynamic way without the need of an ancillary system for the activation of the required transmission change. In particular, this Review gives emphasis to the nonlinear optical properties of photoactive materials for the function of optical power limiting. All known mechanisms of optical limiting have been analyzed and discussed for the different types of materials.

Investigation of optical limiting in iron oxide nanoparticles

We present the study of optical limiting in iron oxide nanoparticles of diameters 31, 44, and 61 nm dispersed in toluene under exposure to nanosecond laser pulses at 532 nm. In the low fluence region smaller size nanoparticles show better optical limiting compared to larger size nanoparticles while in the high fluence region all the three samples show same limiting performance. Experimental results were compared with the well reported limiter fullerene C(60) dissolved in toluene. Iron oxide nanoparticles show better optical limiting compared to C(60) in the intermediate fluence region and comparable performance in the high fluence region. The pico-second Z-scan studies indicate that the contribution of electronic nonlinear refractive index and the two-photon absorption to the optical limiting is negligible. Our observations further indicate that the dominant mechanism for the optical limiting in iron oxide nanoparticles is nonlinear scattering.

Polarization selective electro-optic polymer waveguide devices by direct electron beam writing

A novel technique for the fabrication of polarization selective electro-optic polymer waveguide devices with direct electron beam writing was described. Birefringence induced by the electric field poling in the electro-optic polymer film was erased in the electron beam exposed regions. The formed waveguides had stronger confinement for the light polarized along the poling direction. High fabrication resolution on the 100 nm scale or smaller could be achieved. Fabrication of polymer polarizer and polarization selective microring resonators with this technique was reported. The highest polarization extinction ratio was measured to be 21.4 dB.

Bend performance-enhanced photonic crystal fibers with anisotropic numerical aperture

Numerical calculations predict that particular birefringent photonic crystal fiber designs exhibit slightly better performance in a coiled configuration than non-birefringent step-index fiber designs with respect to higher order mode suppression for the realization of large mode area effectively single transverse mode fibers. The passive losses of the fundamental and first few higher order modes of a birefringent photonic crystal fiber design with a 41 microm diameter core incorporating stress applying parts (SAP) were calculated using an integrated electromechanical finite element method. Minimum higher order mode losses of up to 5.5 dB/m were predicted for fundamental mode losses of only 0.0014 dB/m. The bend performance of this PCF design was predicted to be relatively insensitive to manufacturing tolerances with respect to air hole size and device assembly tolerances with respect to coiling diameter based on the calculated dependence of the mode losses on these parameters. The positions and refractive index of the SAP render the numerical aperture of the core anisotropic allowing further tailoring of the bend performance by adjusting the angle between the coiling plane of the fiber and the orientation of the SAP within the cladding. Fundamental and higher-order mode losses are calculated for step-index fiber (SIF) designs with a 40 microm diameter core for comparison. The step-index fiber designs were predicted to exhibit slightly inferior bend loss mode discrimination and higher sensitivity to packaging configuration compared to the photonic crystal fiber designs presented.

Reversible switching of quantum cascade laser-modes using a pH-responsive polymeric cladding as transducer

We present a novel approach for the reversible switching of the emission wavelength of a quantum cascade laser (QCL) using a halochromic cladding. An air-waveguide laser ridge is coated with a thin layer of polyacrylic acid. This cladding introduces losses corresponding to the absorption spectrum of the polymer. By changing the state of the polymer, the absorption spectrum and losses change, inducing a shift of 7 cm(-1) in the emission wavelength. This change is induced by exposure to acidic or alkaline vapors under ambient conditions and is fully reversible. Such lasers can be used as multi-color light source and as sensor for atmospheric pH.

SOA gate array recirculating buffer with fiber delay loop

We present a compact variable delay buffer for storage of 40 byte packets. The recirculating buffer is based on an InP SOA gate array two-by-two switch which provides greater than 40 dB of extinction, sub-nanosecond switching, and fiber-to-fiber gain. The switch is used with a fiber delay loop 450 centimeters, or 23 ns, in length. The buffer is demonstrated with greater than 98% packet recovery at 40 Gb/s for up to 184 ns of storage.

Method for characterization of diffusion properties of photopolymerisable systems

A novel approach for measuring the diffusion coefficients in photopolymerisable materials is proposed. The method is based on studying the evolution of the surface relief profile in a single illuminated spot using an interferometric surface profiler. It is shown that the observed post-exposure swelling in the illuminated spot is due to mass-transport of monomer from the unexposed to the exposed area driven by a monomer concentration gradient set up by the monomer polymerization in the exposed area. Appropriate choice of the thickness of the studied layers ensures both lateral movement of monomer and negligible contribution from the depth. The diffusion coefficient is retrieved from the standard one-dimensional diffusion equation where the height of the profile in the center of the illuminated spot is used instead of the monomer concentration. In contrast to other techniques for measuring the diffusion in photopolymerisable materials, no assumptions or preliminary information about the polymerization rates are required. It is shown how the method can be used for studying the intensity and polymer density dependence of diffusion coefficient.

Toward a low-jitter 10 GHz pulsed source with an optical frequency comb generator

We demonstrate low residual timing jitter of 10 GHz pulses from a 1.55 ?m optical frequency comb generator based on a doubly-resonant electro-optic modulator. The comb spectral phase is shown to be linear but of different slopes for the two sides of the optical spectrum. The linear phase delay predicts well the measured timing delay of the two pulse trains from the comb generator. The pulse timing jitter is analyzed, and we illustrate that the pump laser's linewidth plays a dominant role in the timing jitter. For Fourier frequencies from 1 Hz to 10 MHz, integrated residual timing jitter at 10 GHz was reduced from approximately 94 fs to approximately 8 fs when the pump laser's linewidth was reduced from approximately 10 MHz to approximately 1 kHz. An electronic servo was then used to stabilize the Fabry-Pérot cavity in the comb generator. Integrated residual timing jitter was further reduced to approximately 6 fs, and the corresponding residual phase noise power density is -105 dBc/Hz at 1 Hz frequency offset from the 10 GHz pulse carrier.

Effect of implementation of a Bragg reflector in the photonic band structure of the Suzuki-phase photonic crystal lattice

We investigate the change of the photonic band structure of the Suzuki-phase photonic crystal lattice when the horizontal mirror symmetry is broken by an underlying Bragg reflector. The structure consists of an InP photonic crystal slab including four InAsP quantum wells, a SiO(2) bonding layer, and a bottom high index contrast Si/SiO(2) Bragg mirror deposited on a Si wafer. Angle- and polarization-resolved photoluminescence spectroscopy has been used for measuring the photonic band structure and for investigating the coupling to a polarized plane wave in the far field. A drastic change in the k-space photonic dispersion between the structure with and without Bragg reflector is measured. An important enhancement on the photoluminescence emission up to seven times has been obtained for a nearly flat photonic band, which is characteristic of the Suzuki-phase lattice.

Long-path supercontinuum absorption spectroscopy for measurement of atmospheric constituents

A supercontinuum source has been proposed as a new tool for measurement of minor species concentrations on long paths through the atmosphere. The present work describes results from recent experiments that demonstrate the potential for Differential Absorption Spectroscopy (DAS) and Spectral Pattern Recognition Differential Absorption Lidar (SPR-DIAL) measurements utilizing a supercontinuum source. As an initial example of this measurement approach, the results include the quantification of water vapor concentration through indoor and outdoor path absorption measurements using a collimated supercontinuum source. Experimental spectra are compared with equivalent simulations from MODTRAN??? versions 4 and 5 to examine the water vapor band between 1300 and 1500 nm to demonstrate the feasibility of the approach.

A hybrid electroabsorption modulator device for generation of high spectral-efficiency optical modulation formats

We report a novel hybrid integrated optic device consisting of AlGaInAs/InP electroabsorption modulators and a four-arm silica-on-silicon planar lightwave circuit optical interferometer. The device is designed for generation of high spectral efficiency optical modulation formats. We demonstrate generation of 21.4 Gb/s quadrature phase shift keyed optical signals with electrical data drives of 2V(pp) amplitudes, achieving a bit error rate of 10(-9) with the required optical signal to noise ratio of ~18 dB in a 0.1 nm resolution bandwidth.

Detection efficiency in total internal reflection fluorescence microscopy

We present a rapid and flexible framework for the accurate calculation of the detection efficiency of fluorescence emission in isotropic media as well as in the vicinity of dielectric or metallic interfaces. The framework accounts for the dipole characteristics of the emitted fluorescence and yields the absolute detection efficiency by taking into account the total power radiated by the fluorophore. This analysis proved to be useful for quantitative measurements, i.e. the fluorescence detection at a glass???water interface for total internal reflection fluorescence microscopy in an epi- and a trans-illumination configuration.

Dispersion and extinction of surface plasmons in an array of gold nanoparticle chains: influence of the air/glass interface

We investigate the dispersion relation and extinction properties of surface plasmons in an array of gold nanoparticle chains under s-polarized plane wave excitations, through experiment and simulation. Our results reveal that the dispersion and extinction properties of gold nanoparticle chains at an air/glass interface are significantly different from those in a uniform medium. Under total internal reflection, the dispersion is much larger than that above total internal reflection and 100% extinction can be reached. We show that the large dispersion under total internal reflection can be explained by dipole fields and coupling at the air/glass interface.

Optical power limiting with photoinduced anisotropy of azobenzene films

We study the power-limiting properties of photoanisotropic azobenzene films with low-power laser. The trans-cis photoisomerization and molecular reorientation of azobenzene molecules induced by polarized laser beams result in intensity-dependent anisotropic effects. Consequently, the transmittance of the input beam that passes through the film between two crossed polarizers becomes enhanced at low intensities and clamped at high intensities. The limiting threshold is adjustable by changing the intensity of excitation beam.