Continuous-wave operation of a single-frequency optical parametric oscillator at 4-5 microm based on periodically poled LiNbO3

Continuous-wave operation of a tandem optical parametric oscillator up to 5.19 µm based on periodically poled LiNbO3

A continuous-wave, tandem optical parametric oscillator (TOPO) based on a MgO-doped periodically poled LiNbO3 (MgO:PPLN) is demonstrated. Because the MgO:PPLN is tandemly pumped by the OPO's signal beam, it outputs simultaneously two groups of signal and idler with a single pump source. The entire range spans from 1398 to 1490 nm, 1914 to 2107 nm, 3720 to 4444 nm, and 4849 to 5190 nm, which is limited by periods of the MgO:PPLN and cavity mirror coatings. The TOPO, whose oscillation threshold of pump power exceeds 7 W, can be easily triggered by marginally increasing the pump power as long as the OPO process occurs. The maximum idler powers are respectively 2.6 W (at 3896 nm) and 34 mW (at 4863 nm), and the corresponding signal powers are both nearly 100 mW.

Continuous-wave, multimilliwatt, mid-infrared source tunable across 6.4-7.5 μm based on orientation-patterned GaAs

We report a continuous-wave (cw) source of tunable mid-infrared radiation providing tens of milliwatt of output power in the 6460-7517 nm spectral range. The source is based on difference-frequency generation (DFG) in orientation-patterned (OP)-GaAs pumped by a Tm-fiber laser at 2010 nm and a 1064 nm-Yb-fiber-pumped cw optical parametric oscillator. Using a 25.7-mm-long OP-GaAs crystal, we have generated up to 51.1 mW of output power at 6790 nm, with >40  mW and >20  mW across 32% and 80% of the mid-infrared tuning range, respectively, which is to the best of our knowledge the highest tunable cw power generated in OP-GaAs in this spectral range. The DFG output at maximum power exhibits passive power stability better than 2.3% rms over more than 1 h and a frequency stability of 1.8 GHz over more than 1 min, in high spatial beam quality. The system and crystal performance at high pump powers have been studied.

Frequency-comb-referenced singly-resonant OPO for sub-Doppler spectroscopy

We present a widely-tunable, singly-resonant optical parametric oscillator, emitting more than 1 W between 2.7 and 4.2 μm, which is phase locked to a self-referenced frequency comb. Both pump and signal frequencies are directly phase-locked to the frequency comb of a NIR-emitting fs mode-locked fibre laser, linked, in turn, to the caesium primary standard. We estimate for the idler frequency a fractional Allan deviation of ∼ 3 × 10⁻¹²τ⁻½ between 1 and 200 s. To test the spectroscopic performance of the OPO, we carried out saturation spectroscopy of several transitions belonging to the ν1 rovibrational band of CH₃I, resolving their electronic quadrupole hyperfine structure, estimating a linewidth better than 200 kHz FWHM for the idler, and determining the absolute frequency of the hyperfine components with a 50-kHz-uncertainty.

Continuous-wave mid-infrared intra-cavity singly resonant PPLN-OPO under 880 nm in-band pumping

We report herein a continuous-wave mid-infrared intra-cavity singly resonant optical parametric oscillator (ICSRO) which is the first example of ICSRO that utilize in-band pumped Nd-doped vanadate laser as pump source. A 1064 nm Nd:YVO₄ laser in-band pumped by 880 nm LD and a periodically poled lithium niobate (PPLN) crystal are employed as the parent pump laser and the nonlinear medium, respectively. The idler output wavelength tuning range is 3.66-4.22 µm. A maximum output power of 1.54 W at 3.66 µm is obtained at absorbed pump power of 21.9 W, with corresponding optical efficiency being 7.0%. The control experiment of ICSRO under 808 nm traditional pumping is also carried out. The results show that in-band pumped ICSRO has better performance in terms of threshold, power scaling, efficiency and power stability than ICSRO traditionally pumped at 808 nm.

Vibrational spectroscopy of bare and solvated ionic complexes of biological relevance

The low density of ions in mass spectrometers generally precludes direct infrared (IR) absorption measurements. The IR spectrum of an ion can nonetheless be obtained by inducing photodissociation of the ion using a high-intensity tunable laser. The emergence of free electron lasers (FELs) and recent breakthroughs in bench-top lasers based on nonlinear optics have now made it possible to routinely record IR spectra of gas-phase ions. As the energy of one IR photon is insufficient to cause dissociation of molecules and strongly bound complexes, two main experimental strategies have been developed to effect photodissociation. In infrared multiple-photon dissociation (IR-MPD) many photons are absorbed resonantly and their energy is stored in the bath of vibrational modes, leading to dissociation. In the "messenger" technique a weakly bound van der Waals atom is detached upon absorption of a single photon. Fundamental, historical, and practical aspects of these methods will be presented. Both of these approaches make use of very different methods of ion preparation and manipulation. While in IR-MPD ions are irradiated in trapping mass spectrometers, the "messenger" technique is generally carried out in molecular beam instruments. The main focus of this review is the application of IR spectroscopy to biologically relevant molecular systems (amino acids, peptides, proteins). Particular issues that will be addressed here include gas-phase zwitterions, the (chemical) structures of peptides and their collision-induced dissociation (CID) products, IR spectra of gas-phase proteins, and the chelation of metal-ligand complexes. Another growing area of research is IR spectroscopy on solvated clusters, which offer a bridge between the gas-phase and solution environments. The development of state-of-the-art computational approaches has gone hand-in-hand with advances in experimental techniques. The main advantage of gas-phase cluster research, as opposed to condensed-phase experiments, is that the systems of interest can be understood in detail and structural effects can be studied in isolation. It will be shown that IR spectroscopy of mass-selected (bio)molecular systems is now well-placed to address specific questions on the individual effect of charge carriers (protons and metal ions), as well as solvent molecules on the overall structure.

Cascaded optical parametric oscillations generating tunable terahertz waves in periodically poled lithium niobate crystals

We present a continuous-wave (cw) singly-resonant optical parametric oscillator (SROPO) based on MgO-doped periodically poled lithium niobate (PPLN) delivering single-frequency idler output from 2.33 to 5.32 microm. In this system, we observe additional spectral components that have been attributed to stimulated Raman lines in other studies. However, we are able to assign them unambiguously to cascaded optical parametric processes. The tunable forward and backward idler waves generated by these additional phase-matched oscillations have frequencies that are tunable around 3.5 and 1.5 THz, respectively.

Continuous-wave singly-resonant optical parametric oscillator with resonant wave coupling

We report major enhancements in the overall performance of continuous-wave singly-resonant optical parametric oscillators (cw SROs) through finite output coupling of the resonant wave. Using a cw SRO based on MgO:sPPLT pumped at 532 nm, we demonstrate improvements of 1.08 W in total output power, 10% in total extraction efficiency, and a 130-nm extension in the useful tuning range, while maintaining pump depletions of 70%, idler output powers of 2.59 W, and a minimal increase in oscillation threshold of 24%. The output-coupled cw SRO can deliver a total power of up to 3.6 W at 40% extraction efficiency across 848-1427 nm. The single-frequency resonant wave also exhibits a higher spectral purity than the non-resonant output.

High spectral purity and tunable operation of a continuous singly resonant optical parametric oscillator emitting in the red

Continuous-wave oscillation of a singly resonant optical parametric oscillator operating from 619 to 640 nm has been obtained. Parametric gain is created in a MgO-doped periodically poled stoichiometric lithium tantalate crystal pumped at 532 nm. 100 mW of single-frequency red light have been generated. The signal frequency is tunable, and its frequency stabilization on an external reference has been achieved.