3D shape measurement of macroscopic objects in digital off-axis holography using structured illumination

Dynamic measurement of 3D displacements using dual-camera lensless Fourier transform digital holography

Dynamic 3D displacement field measurement is an effective means to characterize the electrical performance stability and structural soundness of microsystems. Combining off-axis lensless Fourier transform multiplexed digital holography and multi-illumination profilometry, a dual-wavelength dual-camera optical setup with a multi-illumination system is developed to simultaneously acquire four phase images with different sensitivity vectors, as well as the object shapes. Meanwhile, the shared reference wave in off-axis lensless Fourier holography gives a convenient way for sensitivity vector modification and phase image registration, which are based on the stereo checkerboard calibration method. The dynamic 3D displacement fields and the strain maps of an energized integrated circuit board reveal that the inhomogeneous thermal expansion may cause some damage to chips, such as pin desoldering and microstructure fracture.

High-precision rotation angle measurement method based on a lensless digital holographic microscope

To accurately measure ultrasmall rotation angles, a robust and effective method based on lensless digital holographic microscopy is proposed in this paper. The method combines holographic microscopy, solid geometry, and 3D measurement, including holographic measurement and angle measurement processes. We can calculate the 3D shape by the angular spectrum algorithm and the least-squares phase-unwrapping algorithm in the holographic process. According to the relationship between the surface shape and rotation angles, the real-time rotation angles can be calculated. To validate the feasibility and practicability of the proposed approach, numerical noise simulations and experiments were performed. The measurement precision of rotation angle can reach 0.5″ in the range of 1000″ in this paper's experiments. The holographic method has high measurement precision and good stability. In addition, the compact small volume has great potential in small-angle sensor applications.

3D-point-cloud-based apparent magnitude model of space objects

A new 3D-point-cloud-based model is presented for calculating the apparent magnitude of space objects. This model does not consider topological relations of space objects, but it can accurately describe the shape of a space object and calculate its apparent magnitude. Once a 3D point cloud of a space object and its material parameters under a certain wavelength are obtained, the apparent magnitude can be solved. Through this model, the apparent magnitude of space objects with different shapes and the wrinkled surface can be calculated easily. Simulation results show that the increase in the number of points can improve the accuracy of this model.

Dynamical measurement of refractive index distribution using digital holographic interferometry based on total internal reflection

We present a method for dynamically measuring the refractive index distribution in a large range based on the combination of digital holographic interferometry and total internal reflection. A series of holograms, carrying the index information of mixed liquids adhered on a total reflection prism surface, are recorded with CCD during the diffusion process. Phase shift differences of the reflected light are reconstructed exploiting the principle of double-exposure holographic interferometry. According to the relationship between the reflection phase shift difference and the liquid index, two dimensional index distributions can be directly figured out, assuming that the index of air near the prism surface is constant. The proposed method can also be applied to measure the index of solid media and monitor the index variation during some chemical reaction processes.

Partially coherent digital in-line holographic microscopy in characterization of a microscopic target

Digital holographic microscopy enables the capture of large three-dimensional volumes. Instead of using a laser as an illumination source, partially coherent alternatives can be used, such as light-emitting diodes, which produce parasitic reflection and speckle-free holograms. Captured high-contrast holograms are suitable for the characterization of micrometer-sized particles. As the reconstructed phase is not usable in the case of multiple overlapping objects, depth extraction can be conducted on a reconstructed intensity. This work introduces a novel depth extraction algorithm that takes into consideration the possible locations of multiple objects at various depths in the imaged volume. The focus metric, the Tamura coefficient, is applied for each pixel in the reconstructed amplitude throughout the volume. This work also introduces an optimized version of the algorithm, which is run in two stages. During the first stage, coarse positions of the objects are extracted by applying the Tamura coefficient to nonoverlapping window blocks of intensity reconstructions. The second stage produces high-precision characterizations of the objects by calculating the Tamura coefficient with overlapping window blocks around axial positions extracted in the first stage. Experimental results with real-world microscopic objects show the effectiveness of the proposed method.

Instrumentation in Diffuse Optical Imaging

Diffuse optical imaging is highly versatile and has a very broad range of applications in biology and medicine. It covers diffuse optical tomography, fluorescence diffuse optical tomography, bioluminescence, and a number of other new imaging methods. These methods of diffuse optical imaging have diversified instrument configurations but share the same core physical principle – light propagation in highly diffusive media, i.e., the biological tissue. In this review, the author summarizes the latest development in instrumentation and methodology available to diffuse optical imaging in terms of system architecture, light source, photo-detection, spectral separation, signal modulation, and lastly imaging contrast.

Development of site-specific locking plates for acetabular fractures

Site-specific locking plates have gained popularity for the treatment of fractures. However, the clinical use of a site-specific locking plate for acetabular fractures remains untested due to production limits. To design a universal site-specific locking plate for acetabular fractures, the 3-dimensional (3D) photographic records of 171 pelvises were retrospectively studied to generate a universal posterior innominate bone surface. Using 3D photographical processing software, the 3D coordinate system was reset according to bony landmarks and was scaled based on the acetabular diameter to allow a direct comparison between surfaces. The measured surface was separated into measurement units. At each measurement unit, the authors calculated the average z-axis values in all samples and obtained the 3D coordinate values of the point cloud that could be reconstructed into the universal surface. A plate was subsequently designed in 3D photographical processing software, and the orientation and distribution of locking screws was included. To manufacture a plate, the data were entered into Unigraphics NX version 6.0 software (Siemens PLM Software, Co, Ltd, Plano, Texas) and a CNC digital milling machine (FANUC Co, Ltd, Yamanashi, Japan). The resulting locking plate fit excellently with the reduced bone surface intraoperatively. Plate contouring was avoided intraoperatively. Universal 3.5-mm locking screws locked successfully into the plate, and their orientations were consistent with the design. No screw yielded to acetabular penetration. This method of designing a site-specific acetabular locking plate is practical, and the plates are suitable for clinical use. These site-specific locking plates may be an option for the treatment of acetabular fractures, particularly in elderly patients.

Real-time monitoring of the solution concentration variation during the crystallization process of protein-lysozyme by using digital holographic interferometry

We report a real-time measurement method of the solution concentration variation during the growth of protein-lysozyme crystals based on digital holographic interferometry. A series of holograms containing the information of the solution concentration variation in the whole crystallization process is recorded by CCD. Based on the principle of double-exposure holographic interferometry and the relationship between the phase difference of the reconstructed object wave and the solution concentration, the solution concentration variation with time for arbitrary point in the solution can be obtained, and then the two-dimensional concentration distribution of the solution during crystallization process can also be figured out under the precondition which the refractive index is constant through the light propagation direction. The experimental results turns out that it is feasible to in situ, full-field and real-time monitor the crystal growth process by using this method.

Measurement of three-dimensional deformation vectors with digital holography and stereophotogrammetry

We present a method to determine the three-dimensional (3D) deformation vectors of an arbitrary stressed object by combining stereophotogrammetry and digital holography in a setup with four cameras. The resulting data consists of a dense 3D point cloud, where every point is associated with a deformation vector. Our method is able to calculate the deformation without prior knowledge of the sensitivity vectors or the object surface. In the experimental setup only the base distance of the cameras needs to be known.

Stereophotogrammetric 3D shape measurement by holographic methods using structured speckle illumination combined with interferometry

We present a unique combination of the numerical three-dimensional (3D) reconstruction of the shape of an object with interferometric deformation measurements. Two cameras record several holograms of an object that is illuminated by structured illumination. This illumination is realized by speckle patterns. To improve the image quality, an inplace speckle reduction technique is combined with the structured illumination to reduce the effect of disturbing subjective speckles which appear in the reconstructed images. Stereophotogrammetric methods are applied to extract the 3D surface information of the object out of the reconstructed images. Since the recording is done by holography and because stereophotogrammetry enables a pointwise correlation between the two views, it is possible to combine other holographic techniques with the reconstructed 3D shape. This is demonstrated by an interferometric deformation measurement of an object cooling down. The resulting interferometric fringes are mapped onto the reconstructed 3D surface. Hence, the proposed method enables automatic and dense matching of interferometric fringe-maps recorded by spatially separated holograms onto the surface of the object, which has not yet been realized by existing techniques.