Photonic crystal fiber for layer-by-layer assembly and measurements of polyelectrolyte thin films

Long-Period Fiber Grating Sensors for Chemical and Biomedical Applications

Optical fiber biosensors (OFBS) are being increasingly proposed due to their intrinsic advantages over conventional sensors, including their compactness, potential remote control and immunity to electromagnetic interference. This review systematically introduces the advances of OFBS based on long-period fiber gratings (LPFGs) for chemical and biomedical applications from the perspective of design and functionalization. The sensitivity of such a sensor can be enhanced by designing the device working at or near the dispersion turning point, or working around the mode transition, or their combination. In addition, several common functionalization methods are summarized in detail, such as the covalent immobilization of 3-aminopropyltriethoxysilane (APTES) silanization and graphene oxide (GO) functionalization, and the noncovalent immobilization of the layer-by-layer assembly method. Moreover, reflective LPFG-based sensors with different configurations have also been introduced. This work aims to provide a comprehensive understanding of LPFG-based biosensors and to suggest some future directions for exploration.

Noncontact characterization of microstructured optical fibers coating in real time

Functional nanocoatings have allowed hollow-core microstructured optical fibers (HC-MOFs) to be introduced into biosensing and photochemistry applications. However, common film characterization tools cannot evaluate the coating performance in situ. Here we report the all-optical noncontact characterization of the HC-MOF coating in real time. Self-assembled multilayers consisting of inversely charged polyelectrolytes (PEs) are deposited on the HC-MOF core capillary, and a linear spectral shift in the position of the fiber transmission minima with increasing the film thickness is observed as small as ∼1.5-6nm per single PE bilayer. We exemplify the practical performance of our approach by registering an increase in the coating thickness from 6±1 to 11±1nm per PE bilayer with increasing ionic strength in the PE solutions from 0.15 to 0.5 M NaCl. Additionally, we show real-time monitoring of pH-induced coating dissolving. Simplicity and high sensitivity make our approach a promising tool allowing noncontact analysis of the HC-MOF coating which is still challenging for other methods.

Optofluidics in Microstructured Optical Fibers

In this paper, we review the development and applications of optofluidics investigated based on the platform of microstructured optical fibers (MOFs) that have miniature air channels along the light propagating direction. The flexibility of the customizable air channels of MOFs provides enough space to implement light-matter interaction, as fluids and light can be guided simultaneously along a single strand of fiber. Different techniques employed to achieve the fluidic inlet/outlet as well as different applications for biochemical analysis are presented. This kind of miniature platform based on MOFs is easy to fabricate, free of lithography, and only needs a tiny volume of the sample. Compared to optofluidics on the chip, no additional waveguide is necessary to guide the light since the core is already designed in MOFs. The measurements of flow rate, refractive index of the filled fluids, and chemical reactions can be carried out based on this platform. Furthermore, it can also demonstrate some physical phenomena. Such devices show good potential and prospects for applications in bio-detection as well as material analysis.

Rapid 3D Patterning of Poly(acrylic acid) Ionic Hydrogel for Miniature pH Sensors

Poly(acrylic acid) (PAA), as a highly ionic conductive hydrogel, can reversibly swell/deswell according to the surrounding pH conditions. An optical maskless -stereolithography technology is presented to rapidly 3D pattern PAA for device fabrication. A highly sensitive miniature pH sensor is demonstrated by in situ printing of periodic PAA micropads on a tapered optical microfiber.