Passively phase-stable, monolithic, all-reflective two-dimensional electronic spectroscopy based on a four-quadrant mirror

Attosecond stable dispersion-free delay line for easy ultrafast metrology

We demonstrate a dispersion-free wavefront splitting attosecond resolved interferometric delay line for easy ultrafast metrology of broadband femtosecond pulses. Using a pair of knife-edge prisms, we symmetrically split and later recombine the two wavefronts with a few tens of attosecond resolution and stability and employ a single-pixel analysis of interference fringes with good contrast using a phone camera without any iris or nonlinear detector. Our all-reflective delay line is theoretically analyzed and experimentally validated by measuring 1st and 2nd order autocorrelations and the SHG-FROG trace of a NIR femtosecond pulse. Our setup is compact, offers attosecond stability with flexibility for independent beam-shaping of the two arms. Furthermore, we suggest that our compact and in-line setup can be employed for attosecond resolved pump-probe experiments of matter with few-cycle pulses.

Coherent Two-Dimensional and Broadband Electronic Spectroscopies

Over the past few decades, coherent broadband spectroscopy has been widely used to improve our understanding of ultrafast processes (e.g., photoinduced electron transfer, proton transfer, and proton-coupled electron transfer reactions) at femtosecond resolution. The advances in femtosecond laser technology along with the development of nonlinear multidimensional spectroscopy enabled further insights into ultrafast energy transfer and carrier relaxation processes in complex biological and material systems. New discoveries and interpretations have led to improved design principles for optimizing the photophysical properties of various artificial systems. In this review, we first provide a detailed theoretical framework of both coherent broadband and two-dimensional electronic spectroscopy (2DES). We then discuss a selection of experimental approaches and considerations of 2DES along with best practices for data processing and analysis. Finally, we review several examples where coherent broadband and 2DES were employed to reveal mechanisms of photoinitiated ultrafast processes in molecular, biological, and material systems. We end the review with a brief perspective on the future of the experimental techniques themselves and their potential to answer an even greater range of scientific questions.

Achromatic frequency doubling of supercontinuum pulses for transient absorption spectroscopy

We present achromatic frequency doubling of supercontinuum pulses from a hollow core fiber as a technique for obtaining tunable ultrashort pulses in the near UV and blue spectral range. Pulse energies are stable on a 1.1% level, averaged over 100 000 shots. By the use of conventional optics only, we compress a 0.2 µJ pulse at a center wavelength of 475 nm to a pulse duration of 12 fs, as measured by X-FROG. We test the capabilities of the approach by employing the ASHG-pulses as a pump in a transient absorption experiment on β-carotene in solution.

Rapid acquisition of broadband two-dimensional electronic spectra by continuous scanning with conventional delay lines

A passively phase-stable, broadband (∼7fs, >2000cm^-1) two-dimensional (2D) electronic spectroscopy apparatus that achieves rapid acquisition rates by continuously-rather than step-wise-scanning the Fourier-transform dimension is demonstrated for the first time, to the best of our knowledge. This is made possible through use of a partially common path interferometer design in which the coherence time τ is sampled in a "rotating frame." Rapid, continuous scanning of τ increases the duty cycle of signal collection, rejects the majority of excitation pulse scatter, and enables the measurement of a complete 2D spectrum in 92 ms, which minimizes the influence of pulse intensity and delay fluctuations on the 2D spectrum. In practice, these improvements make possible the acquisition of hundreds of 2D spectra in tens of minutes, which opens the door to dense sampling of ultrafast relaxation dynamics and to generating extremely broadband 3D Fourier-transform spectra.

Ultrabroadband 2D electronic spectroscopy with high-speed, shot-to-shot detection

Two-dimensional electronic spectroscopy (2DES) is an incisive tool for disentangling excited state energies and dynamics in the condensed phase by directly mapping out the correlation between excitation and emission frequencies as a function of time. Despite its enhanced frequency resolution, the spectral window of detection is limited to the laser bandwidth, which has often hindered the visualization of full electronic energy relaxation pathways spread over the entire visible region. Here, we describe a high-sensitivity, ultrabroadband 2DES apparatus. We report a new combination of a simple and robust setup for increased spectral bandwidth and shot-to-shot detection. We utilize 8-fs supercontinuum pulses generated by gas filamentation spanning the entire visible region (450 - 800 nm), which allows for a simultaneous interrogation of electronic transitions over a 200-nm bandwidth, and an all-reflective interferometric delay system with angled nanopositioner stages achieves interferometric precision in coherence time control without introducing wavelength-dependent dispersion to the ultrabroadband spectrum. To address deterioration of detection sensitivity due to the inherent instability of ultrabroadband sources, we introduce a 5-kHz shot-to-shot, dual chopping acquisition scheme by combining a high-speed line-scan camera and two optical choppers to remove scatter contributions from the signal. Comparison of 2D spectra acquired by shot-to-shot detection and averaged detection shows a 15-fold improvement in the signal-to-noise ratio. This is the first direct quantification of detection sensitivity on a filamentation-based ultrabroadband 2DES apparatus.

Post-processing phase-correction algorithm in two-dimensional electronic spectroscopy

In a typical two-dimensional electronic spectroscopy (2DES) experiment, the timing errors of the coherence and emission time when determining the absolute time zeros usually introduce extraneous spectral phase slopes and distort the 2D spectrum. In this work, a phase-correction method that merely relies on the data post-processing algorithm is proposed. The method allows reconstructing the spectrum by simply subtracting the artificial linear spectral-phase slopes from the phase component of the 2D spectrum along both coherence and emission frequency axes. The new method has the advantages of ease of implementation and no need for the supplementary experiments and iterative fitting algorithm as commonly-used phasing methods, which may improve the phasing issue in 2DES and serve as a cross-check of now available phasing methods.

Vibronic coupling in organic semiconductors for photovoltaics

Ultrafast two-dimensional electronic spectroscopy reveals vibronically-assisted coherent charge transport and separation in organic materials and opens up new perspectives for artificial light-to-current conversion.

Precise phase determination with the built-in spectral interferometry in two-dimensional electronic spectroscopy

A new method determining the precise phase of pulse sequences in two-dimensional electronic spectroscopy (2DES) is proposed merely using the already built-in spectral interferometry. The approach is easily implemented without the supplementary instrumental construction, only at the expense of a few additional scanning and data-fitting processes. This method is executed with the sample in place, effectively avoiding the phase ambiguities of the beam propagation in samples, thus calibrating the absolute phase at the exact interaction region. The new proposed method is expected to improve the phasing procedure in 2DES in a more convenient way.

Multidimensional Electronic Spectroscopy of Photochemical Reactions

Coherent multidimensional electronic spectroscopy can be employed to unravel various channels in molecular chemical reactions. This approach is thus not limited to analysis of energy transfer or charge transfer (i.e. processes from photophysics), but can also be employed in situations where the investigated system undergoes permanent structural changes (i.e. in photochemistry). Photochemical model reactions are discussed by using the example of merocyanine/spiropyran-based molecular switches, which show a rich variety of reaction channels, in particular ring opening and ring closing, cis-trans isomerization, coherent vibrational wave-packet motion, radical ion formation, and population relaxation. Using pump-probe, pump-repump-probe, coherent two-dimensional and three-dimensional, triggered-exchange 2D, and quantum-control spectroscopy, we gain intuitive pictures on which product emerges from which reactant and which reactive molecular modes are associated.

Experimental implementations of two-dimensional fourier transform electronic spectroscopy

Two-dimensional electronic spectroscopy (2DES) reveals connections between an optical excitation at a given frequency and the signals it creates over a wide range of frequencies. These connections, manifested as cross-peak locations and their lineshapes, reflect the underlying electronic and vibrational structure of the system under study. How these spectroscopic signatures evolve in time reveals the system dynamics and provides a detailed picture of coherent and incoherent processes. 2DES is rapidly maturing and has already found numerous applications, including studies of photosynthetic energy transfer and photochemical reactions and many-body interactions in nanostructured materials. Many systems of interest contain electronic transitions spanning the ultraviolet to the near infrared and beyond. Most 2DES measurements to date have explored a relatively small frequency range. We discuss the challenges of implementing 2DES and compare and contrast different approaches in terms of their information content, ease of implementation, and potential for broadband measurements.

Dispersion-free continuum two-dimensional electronic spectrometer

Electronic dynamics span broad energy scales with ultrafast time constants in the condensed phase. Two-dimensional (2D) electronic spectroscopy permits the study of these dynamics with simultaneous resolution in both frequency and time. In practice, this technique is sensitive to changes in nonlinear dispersion in the laser pulses as time delays are varied during the experiment. We have developed a 2D spectrometer that uses broadband continuum generated in argon as the light source. Using this visible light in phase-sensitive optical experiments presents new challenges in implementation. We demonstrate all-reflective interferometric delays using angled stages. Upon selecting an ~180  nm window of the available bandwidth at ~10  fs compression, we probe the nonlinear response of broadly absorbing CdSe quantum dots and electronic transitions of Chlorophyll a.