Superlensing plano-convex-microsphere (PCM) lens for direct laser nano-marking and beyond

Self-Sensing Scanning Superlens for Three-Dimensional Noninvasive Visible-Light Nanoscale Imaging on Complex Surfaces

Microsphere-assisted super-resolution imaging technology offers label-free, real-time dynamic imaging via white light, which has potential applications in living systems and the nanoscale detection of semiconductor chips. Scanning can aid in overcoming the limitations of the imaging area of a single microsphere superlens. However, the current scanning imaging method based on the microsphere superlens cannot achieve super-resolution optical imaging of complex curved surfaces. Unfortunately, most natural surfaces are composed of complex curved surfaces at the microscale. In this study, we developed a method to overcome this limitation through a microsphere superlens with a feedback capability. By maintaining a constant force between the microspheres and the sample, noninvasive super-resolution optical imaging of complex abiotic and biological surfaces was achieved, and the three-dimensional information on the sample was simultaneously obtained. The proposed method significantly expands the universality of scanning microsphere superlenses for samples and promotes their widespread use.

Focusing light with a metal film coated patchy particle

Microsphere-assisted super-resolution imaging is a promising technique that can significantly enhance the resolution of conventional optical microscopes. The focus of a classical microsphere is called photonic nanojet, which is a symmetric high-intensity electromagnetic field. Recently, patchy microspheres have been reported to have superior imaging performance than pristine microspheres, and coating microspheres with metal films leads to the formation of photonic hooks, which can enhance the imaging contrast of microspheres. Understanding the influence of metal patches on the near-field focusing of patchy particles is important for the rational design of a nanostructured microlens. In this work, we theoretically and experimentally showed that the light waves can be focused and engineered using patchy particles. When coating dielectric particles with Ag films, light beams with a hook-like structure or S-shaped structure can be generated. Simulation results show that the waveguide ability of metal films and the geometric asymmetry of patchy particles cause the formation of S-shaped light beams. Compared with classical photonic hooks, S-shaped photonic hooks have a longer effective length and a smaller beam waist at far-field region. Experiments were also carried out to demonstrate the generation of classical and S-shaped photonic hooks from patchy microspheres.

Optical-field-induced surface nanobumps in near-infrared laser direct cleaning of nanoparticles on silicon

The evolution of surface damage in laser direct cleaning (LDC) of nanoparticulate contamination on silicon (Si) was theoretically and experimentally investigated. Nanobumps with a volcano-like shape were found in near-infrared laser cleaning of polystyrene latex nanoparticles on Si wafers. According to the finite-difference time-domain simulation and the high-resolution surface characterization, unusual particle-induced optical field enhancement in the vicinity of the interface between Si and nanoparticles is mainly responsible for the generation of volcano-like nanobumps. This work is of fundamental significance for the understanding of the laser-particle interaction during LDC and will promote the development of nanofabrication and nanoparticle cleaning applications in optics, microelectromechanical systems, and semiconductors.

Special Issue on Photonic Jet: Science and Application

Photonic jets (PJs) are important mesoscale optical phenomena arising from electromagnetic waves interacting with dielectric particles with sizes around several to several tens wavelengths (~2–40 λ) [...]

Near-Field Light-Bending Photonic Switch: Physics of Switching Based on Three-Dimensional Poynting Vector Analysis

Photonic hook is a high-intensity, bent light focus with a proportional curvature to the wavelength of the incident light. Based on this unique light-bending phenomenon, a novel near-field photonic switch by means of a right-trapezoid dielectric Janus particle-lens embedded in the core of a planar waveguide is proposed for switching the photonic signals at two common optical communication wavelengths, 1310 nm and 1550 nm, by using numerical simulations. The signals at these two wavelengths can be guided to different routes according to their oppositely bent photonic hooks to realise wavelength selective switching. The switching mechanism is analysed by an in-house developed three-dimensional (3D) Poynting vector visualisation technology. It demonstrates that the 3D distribution and number of Poynting vector vortexes produced by the particle highly affect the shapes and bending directions of the photonic hooks causing the near-field switching, and multiple independent high-magnitude areas matched by the regional Poynting vector streamlines can form these photonic hooks. The corresponding mechanism can only be represented by 3D Poynting vector distributions and is being reported for the first time.

High resolution imaging of viruses: Scanning probe microscopy and related techniques

Scanning probe microscopy is a group of measurements that provides 3D visualization of viruses in different environmental conditions including liquids and air. Besides 3D topography it is possible to measure the properties like mechanical rigidity and stability, adhesion, tendency to crystallization, surface charge, etc. Choosing the right substrate and scanning parameters makes it much easier to obtain reliable data. Rational interpretation of experimental results should take into account possible artifacts, proper filtering and data presentation using specially designed software packages. Animal and human virus characterization is in the focus of many intensive studies because of their potential harm to higher organisms. The article focuses on high-resolution visualization of plant viruses. Tobacco mosaic virus, potato viruses X and B and others are not dangerous for the human being and are widely used in different applications such as vaccine preparation, construction of building units in nanotechnology and material science applications, nanoparticle production and delivery, and even metrology. The methods of virus's deposition, visualization, and consequent image processing and interpretation are described in details. Specific examples of viruses imaging are illustrated using the FemtoScan Online software, which has typical and all the necessary built-in functions for constructing three-dimensional images, their processing and analysis. Despite visible progress in visualizing the viruses using probe microscopy, many unresolved problems still remain. At present time the probe microscopy data on viruses is not systemized. There is no descriptive atlas of the images and morphology as revealed by this type of high resolution microscopy. It is worth emphasizing that new virus investigation methods will appear due to the progress of science.

Microsphere-Based Super-Resolution Imaging for Visualized Nanomanipulation

Nanomanipulation provides high operating accuracy and has been successfully applied in many fields such as nanoparticle assembly, nanowire alignment, and semiconductor device manufacturing. However, because of the limits of optical diffraction, the use of nanomanipulation is challenged by a lack of visual feedback at the nanoscale, and thus, its efficiency is difficult to be improved. In this study, we developed a novel method of microlens-enhanced nanomanipulation capable of real-time super-resolution imaging. Nanomanipulation was performed using the atomic force microscopy (AFM) mechanism by coupling a microlens to an AFM probe, and optical imaging with a minimum characteristic size of 80 nm is realized by combining the microlens with the optical imaging system. Under the conditions of fluorescent illumination and white light illumination, nanomanipulations were achieved under real-time visual guidance for fluorescent nanoparticles with a diameter of 100 nm and silver nanowires with a diameter of 80 nm, respectively. This method enables the possibility of in situ observation and manipulation, which can potentially be used for biological samples.

Unibody microscope objective tipped with a microsphere: design, fabrication, and application in subwavelength imaging

Microsphere-based subwavelength imaging technique was first demonstrated in 2011. After nearly a decade of efforts, such technique has spawned numerous interests in fields such as laser nano-machining, imaging, sensing, and biological detection. For wider industrial-scale application of the technique, a robust and low-cost objective lens incorporating a microsphere lens is highly desired and sought by many researchers. In this work, we demonstrate a unibody microscope objective lens formed by tipping a high-index microsphere onto a plano-convex lens and subsequently fitting them into a conventional objective lens. We call this the plano-convex-microsphere (PCM) objective, which resembles the appearance and operation of an ordinary microscope objective while providing super-resolving power in discerning subwavelength 100 nm features ($\lambda /{4}.{7}$λ/4.7) in air and far-field conditions. The imaging performance of the PCM objective, along with the working distance, has been systematically investigated. It has a calibrated resolution of $\lambda /{3}$λ/3 in the far field, a numerical aperture of 1.57, and a working distance of 3.5 µm. With the assistance of a scanning process, larger-area imaging is realized. The PCM objective can be easily adapted to existing microscope systems and is appealing for commercialization.