Dual-mode electromagnetically induced transparency and slow light in a terahertz metamaterial

Tailoring dual-band electromagnetically induced transparency with polarization conversions in a dielectric-metal hybrid metastructure

Metastructure analogs of electromagnetically induced transparency (EIT) provide a new approach for engineering realizations of nonlinear optical manipulations regardless of harsh conditions; further can be employed in polarization conversions for its low-loss transmission and phase modulation. In this work, dual-band EIT in a dielectric-metal hybrid metasurface achieved via providing different coupling channels is theoretically investigated with a maximum group delay of 404 ps. The linear-to-circular polarization conversion (LCPC) behaviors are observed respectively holding the transmittance of 0.58 at 0.68 THz, 0.73 at 0.76 THz, 0.61 at 0.90 THz, 0.53 at 0.99 THz, owning to the asymmetric EIT responses in the transverse magnetic (TM) and transverse electric (TE) modes incidence. On the other hand, phase-transition VO₂ is doped to perturb the dark mode resonances. With its conductivity σ = 10⁵ S/m, dual transparency peaks transform into unimodal broadband transmission windows with relative bandwidths of 17.1% and 9.1% under the TE and TM excitations apart. Induced LCPC possesses a bandwidth of 10.4% centered at 0.76 THz attributed to the drastic dispersion. The as-proposed design exploits pattern asymmetry of EIT responses to realize LCPC, promising the wide prospect of reconfigurable multiplexings.

Switchable Multifunctional Terahertz Metamaterials Based on the Phase-Transition Properties of Vanadium Dioxide

Currently, terahertz metamaterials are studied in many fields, but it is a major challenge for a metamaterial structure to perform multiple functions. This paper proposes and studies a switchable multifunctional multilayer terahertz metamaterial. Using the phase-transition properties of vanadium dioxide (VO2), metamaterials can be controlled to switch transmission and reflection. Transmissive metamaterials can produce an electromagnetically induced transparency-like (EIT-like) effect that can be turned on or off according to different polarization angles. The reflective metamaterial is divided into I-side and II-side by the middle continuous VO2 layer. The I-side metamaterials can realize linear-to-circular polarization conversion from 0.444 to 0.751 THz when the incident angle of the y-polarized wave is less than 30°. The II-side metamaterials can realize linear-to-linear polarization conversion from 0.668 to 0.942 THz when the incident angle of the y-polarized wave is less than 25°. Various functions can be switched freely by changing the conductivity of VO2 and the incident surface. This enables metamaterials to be used as highly sensitive sensors, optical switches, and polarization converters, which provides a new strategy for the design of composite functional metamaterials.

Resonance-order-dependent plasmon-induced transparency in orthogonally arranged nanocavities

We investigate plasmon-induced transparency (PIT) in a resonator structure consisting of two orthogonally arranged metal-insulator-metal nanocavities. Finite-difference time- domain simulations reveal that when both cavities in this structure resonate at the same frequency, the PIT effect can be used to induce spectral modulation. This spectral modulation depends on the resonance order of the cavity coupled directly to the external field, as it occurs when first-order resonance is exhibited but not with second-order resonance. We confirmed that this behavior is caused by the discrepancies between odd-order and even-order resonances using classical mechanical models analogous to nanocavities. By tuning the resonance frequency and resonance order of the cavities, one can modulate the spectrum of the resonator structure in an order-selective manner. The resonant order-dependent PIT provides insight into the development of metamaterials that function only at specific resonant orders for incident waves of various bands.

Triple plasmon-induced transparency and optical switch desensitized to polarized light based on a mono-layer metamaterial

A mono-layer metamaterial comprising four graphene-strips and one graphene-square-ring is proposed herein to realize triple plasmon-induced transparency (PIT). Theoretical results based on the coupled mode theory (CMT) are in agreement with the simulation results obtained using the finite-difference time-domain (FDTD). An optical switch is investigated based on the characteristics of graphene dynamic modulation, with modulation degrees of the amplitude of 90.1%, 80.1%, 94.5%, and 84.7% corresponding to 1.905 THz, 2.455 THz, 3.131 THz, and 4.923 THz, respectively. Moreover, the proposed metamaterial is insensitive to the change in the angle of polarized light, for which the triple-PIT is equivalent in the cases of both x- and y-polarized light. The optical switch based on the proposed structure is effective not only for the linearly polarized light in different directions but also for left circularly polarized and right circularly polarized light. As such, this work provides insight into the design of optoelectronic devices based on the polarization characteristics of the incident light field on the optical switch and PIT.

Tunable dual plasmon-induced transparency based on a monolayer graphene metamaterial and its terahertz sensing performance

In this paper, tunable dual plasmon-induced transparency (PIT) is achieved by using a monolayer graphene metamaterial in the terahertz region, which consists of two graphene strips of different sizes and a graphene ring. As the dual PIT effect is induced by the destructive interference between the two quasi-dark modes and the bright mode, we propose a four-level plasmonic system based on the linearly coupled Lorentzian oscillators to explain the mechanism behind the dual PIT. It is proved that the theoretical results agree well with the simulation results. Most importantly, the sensing properties of the designed device have been investigated in detail and we found that it can exhibit high sensitivities and figure of merit (FOM). Furthermore, the dual PIT windows can be effectively modulated by changing the Fermi energy of the graphene layer and the angle of incidence. Thus, the proposed graphene-based metamaterial can hold wide applications for switches, modulators, and multi-band refractive index sensors in the terahertz region.

Slow-light application using dielectrics in a metallic terahertz plasmonic waveguide

In this paper, a metallic terahertz (THz) plasmonic waveguide comprising subwavelength scale pillars is proposed. The pillars are periodically arranged in one dimension and are assumed to be metallic; on the top of the pillars, dielectric material is deposited. The fundamental guided resonant mode properties of the waveguide are comprehensively examined with and without dielectric material. Furthermore, guided modes are examined while varying the refractive index value (n) of the dielectric material, and it is observed that resonant modes supported by the waveguide strongly depend on n value of dielectrics. The dispersion relations of the guided modes are analyzed to ensure the plasmonic response. To support the numerical results, a Drude model is employed to fit the real and imaginary parts of the complex dielectric function for the proposed waveguide design. The group velocity of the fundamental guided terahertz mode is calculated in order to investigate slow-light properties of the terahertz wave. Additionally, the phase of transmission output and electric field profiles are studied in support of slow-light phenomena. The slow-light phenomenon using a dielectric-metal-based plasmonic waveguide could be very useful in construction of terahertz buffers, storage devices, terahertz sensors, detectors, etc.

Independently tunable electromagnetically induced transparency effect and dispersion in a multi-band terahertz metamaterial

In this article, we experimentally and numerically investigate a planar terahertz metamaterial (MM) geometry capable of exhibiting independently tunable multi-band electromagnetically induced transparency effect (EIT). The MM structure exhibits multi-band EIT effect due to the strong near field coupling between the bright mode of the cut-wire (CW) and dark modes of pair of asymmetric double C resonators (DCRs). The configuration allows us to independently tune the transparency windows which is challenging task in multiband EIT effect. The independent modulation is achieved by displacing one DCR with respect to the CW, while keeping the other asymmetric DCR fixed. We further examine steep dispersive behavior of the transmission spectra within the transparency windows and analyze slow light properties. A coupled harmonic oscillator based theoretical model is employed to elucidate as well as understand the experimental and numerical observations. The study can be highly significant in the development of multi-band slow light devices, buffers and modulators.

Wideband and Large Angle Electromagnetically Induced Transparency by the Equivalent Transmission Line in a Metasurface

A classical structure for a U-shaped metasurface exhibiting a wideband and large angle electromagnetically induced transparency (EIT) effect in the terahertz range is proposed. One horizontal and two vertical strips, which represent the bright and dark modes, respectively, are created for the U-shaped structure. The finite integration time domain (FITD) and equivalent circuit method are compared with the EIT result. The EIT effect is affected by the length of the vertical bar and by the distance from the vertical bar to the symmetry axis. The results show that the asymmetry of the main structure in the x and y axes makes it easier to achieve the EIT effect. In addition, by changing the incident angle, the EIT effect always exists until the angle of the incidental electromagnetic wave is 85 degrees. These results have many potential applications for terahertz filtering, large-angle switching and sensors.

Design of Broad Stopband Filters Based on Multilayer Electromagnetically Induced Transparency Metamaterial Structures

Broad stopband filters are proposed, based on multilayer electromagnetically induced transparency (EIT) metamaterial structures. The single EIT metamaterial consists of a U-shaped resonator and a strip on a polyimide substrate. The EIT-like spectral feature is firstly utilized to achieve stopband filters by properly coupling two layers of EIT structure. Influences of different rotation angles on the transmission properties of the two-layer EIT structure are investigated. It is found the wider low-transmission band can be obtained for the Transverse Magnetic (TM) polarization when the two EIT metal structures are vertical to each other. Furthermore, the bandwidth of the stopband can be controlled by increasing layers of the EIT structures with the proper architectural design. The design using a coupling effect of multi EIT-like resonances in the metamaterial would provide a new method for broad stopband filters in highly integrated optical circuits.

Angular dependent strong coupling between localized waveguide resonance and surface plasmon resonance in complementary metamaterials

We give direct evidence of both surface plasmon resonance (SPR) and localized waveguide resonance (LWR) contribution to the extraordinary optical transmission in complementary metamaterials. Strong coupling between SPR and LWR are also observed with clear evidence of Rabi splitting and anti-crossing phenomena. The splitting introduces sharp phase shift, which in turn enhances group velocity delay by the incident angle without geometric parameter change. The results not only clarify SPR and LWR effects in the extraordinary optical transmission, but also provide a novel route to control light-metamaterial interaction by angular modulation for on-chip slow light devices.

Optical chirality breaking in a bilayered chiral metamaterial

We propose a planar optical bilayered chiral metamaterial, which consists of periodic metallic arrays of two L-shaped structures and a nanorod twisted on both sides of a dielectric slab, to investigate the optical chirality breaking effect by using finite-difference time-domain (FDTD) method. Even the metamaterial is with chiral symmetry, an optical chirality breaking window in the asymmetric transmission pass band is obtained in chiral metamaterial structure. We analyze the plasmonic mode properties and attribute the mechanism of the optical chirality breaking effect to the plasmonic analogue of EIT. The optical chirality breaking window can be modulated by changing the geometric parameters of the nanorods in the structure.

Transition from capacitive coupling to direct charge transfer in asymmetric terahertz plasmonic assemblies

We experimentally and numerically analyze the charge transfer THz plasmons using an asymmetric plasmonic assembly of metallic V-shaped blocks. The asymmetric design of the blocks allows for the excitation of classical dipolar and multipolar modes due to the capacitive coupling. Introducing a conductive microdisk between the blocks, we facilitated the excitation of the charge transfer plasmons and studied their characteristics along with the capacitive coupling by varying the size of the disk.

Multispectral plasmon-induced transparency in hyperfine terahertz meta-molecules

We experimentally and theoretically demonstrated an approach to achieve multispectral plasmon-induced transparency (PIT) by utilizing meta-molecules that consist of hyperfine terahertz meta-atoms. The feature size of such hyperfine meta-atoms is 400 nm, which is one order smaller than that of normal terahertz metamaterials. The hyperfine meta-atoms with close eigenfrequencies and narrow resonant responses introduce different metastable energy levels, which makes the multispectral PIT possible. In the triple PIT system, the slow light effect is further confirmed as the effective group delay at three transmission windows can reach 7.3 ps, 7.4 ps and 4.5 ps, respectively. Precisely controllable manipulation of the PIT peaks in such hyperfine meta-molecules was also proven. The new hyperfine planar design is not only suitable for high-integration applications, but also exhibits significant slow light effect, which has great potential in advanced multichannel optical information processing. Moreover, it reveals the possibility to construct hyperfine N-level energy systems by artificial hyperfine plasmonic structures, which brings a significant prospect for applications on miniaturized plasmonic devices.

Tailoring electromagnetically induced transparency with different coupling mechanisms

Tailoring electromagnetically induced transparency with two different coupling mechanisms has been numerically demonstrated. The results show that EIT based on simultaneous electric resonance and magnetic resonance has relatively larger coupling distance compared with that based on electric resonance near field coupling to magnetic resonance. The relatively large coupling distance is due to the relatively small susceptibility change. For EIT based on simultaneous electric resonance and magnetic resonance, not only incident electric field but also the incident magnetic field pays a role on the susceptibility of system. The influence of the incident magnetic field leads to relatively smaller susceptibility change compared with that based on electric resonance near field coupling to magnetic resonance.

Coexistence of Scattering Enhancement and Suppression by Plasmonic Cavity Modes in Loaded Dimer Gap-Antennas

Plasmonic nanoantenna is of promising applications in optical sensing and detection, enhancement of optical nonlinear effect, surface optical spectroscopy, photoemission, etc. Here we show that in a carefully-designed dimer gap-antenna made by two metallic nanorods, the longitudinal plasmon antenna mode (AM) of bonding dipoles can compete with the transverse plasmonic cavity modes (CMs), yielding dramatically enhanced or suppressed scattering efficiency, depending on the CMs symmetry characteristics. More specifically, it is demonstrated that an appropriately loaded gap layer enables substantial excitation of toroidal moment and its strong interaction with the AM dipole moment, resulting in Fano- or electromagnetically induced transparency (EIT)-like profile in the scattering spectrum. However, for CMs with nonzero azimuthal number, the spectrum features a cumulative signature of the respective AM and CM resonances. We supply both detailed near-field and far-field analysis, showing that the modal overlap and phase relationship between the fundamental moments of different order play a crucial role. Finally, we show that the resonance bands of the AM and CMs can be tuned by adjusting the geometry parameters and the permittivity of the load. Our results may be useful in plasmonic cloaking, spin-polarized directional light emission, ultra-sensitive optical sensing, and plasmon-mediated photoluminescence.

Plasmon-Induced Transparency by Hybridizing Concentric-Twisted Double Split Ring Resonators

As a classical analogue of electromagnetically induced transparency, plasmon induced transparency (PIT) has attracted great attention by mitigating otherwise cumbersome experimental implementation constraints. Here, through theoretical design, simulation and experimental validation, we present a novel approach to achieve and control PIT by hybridizing two double split ring resonators (DSRRs) on flexible polyimide substrates. In the design, the large rings in the DSRRs are stationary and mirror images of each other, while the small SRRs rotate about their center axes. Counter-directional rotation (twisting) of the small SRRs is shown to lead to resonance shifts, while co-directional rotation results in splitting of the lower frequency resonance and emergence of a PIT window. We develop an equivalent circuit model and introduce a mutual inductance parameter M whose sign is shown to characterize the existence or absence of PIT response from the structure. This model attempts to provide a quantitative measure of the physical mechanisms underlying the observed PIT phenomenon. As such, our findings can support the design of several applications such as optical buffers, delay lines, and ultra-sensitive sensors.

Impact of Substrate and Bright Resonances on Group Velocity in Metamaterial without Dark Resonator

Manipulating the speed of light has never been more exciting since electromagnetic induced transparency and its classical analogs led to slow light. Here, we report the manipulation of light group velocity in a terahertz metamaterial without needing a dark resonator, but utilizing instead two concentric split-ring bright resonators (meta-atoms) exhibiting a bright Fano resonance in close vicinity of a bright Lorentzian resonance to create a narrowband transmittance. Unlike earlier reports, the bright Fano resonance does not stem from an asymmetry of meta-atoms or an interaction between them. Additionally, we develop a method to determine the metamaterial “effective thickness”, which quantifies the influence of the substrate on the metamaterial response and has remained challenging to estimate so far. By doing so, very good agreement between simulated and measured group delays and velocities is accomplished. The proposed structure and method will be useful in designing optical buffers, delay lines, and ultra-sensitive sensors.