Ultra-broadband fiber optical parametric amplifier pumped by chirped pulses

Noise analysis in a seeded four-wave mixing process generated in a photonic crystal fiber pumped by a chirped pulse

Four-wave mixing is investigated when chirped pump and signal pulses are injected in a photonic crystal fiber. The shot-to-shot stability of the amplified coherent signal was measured by using the dispersive Fourier transform method and compared with numerical simulations. We highlight that the signal-to-noise ratio (SNR) of the pulsed signal increases with the injected power and show that it is not deteriorated through the amplification when the fiber optical parametric amplifier is strongly saturated. The SNR of the signal remains nearly constant after the amplifier.

High-energy normal-dispersion fiber optical parametric chirped-pulse oscillator

We demonstrate a fiber optical parametric chirped-pulse oscillator (FOPCPO) pumped in the normal-dispersion regime by chirped pulses at 1.036 µm. Highly chirped idler pulses tunable from 1210 nm to 1270 nm with energies higher than 250 nJ are generated from our system, along with signal pulses tunable from 870 nm to 910 nm. Numerical simulations demonstrate that further energy scaling is possible and paves the way for the use of such FOPCPOs for applications requiring high-energy, compact, and low-noise sources, such as in biophotonics or spectroscopy.

Spectral correlation of four-wave mixing generated in a photonic crystal fiber pumped by a chirped pulse

We report the spectral distribution of the parametric process generated in a photonic crystal fiber pumped by a chirped pulse. The spectral correlation of four-wave mixing has been measured using the dispersive Fourier transform method. From statistical analysis of multiple shot-to-shot spectral measurements, the spectral correlation between the signal and idler photons reveals physical insights into the particular portion of the pump spectrum responsible for generating the four-wave mixing. Therefore, the shape of the correlation map indicates directly the temporal and spectral links between the signal and the pump, which are highly important to design a four-wave mixing based amplifier.

All-fiber high-power 1700 nm femtosecond laser based on optical parametric chirped-pulse amplification

We present the design and construction of an all-fiber high-power optical parametric chirped-pulse amplifier working at 1700 nm, an important wavelength for bio-photonics and medical treatments. The laser delivers 1.42 W of output average power at 1700 nm, which corresponds to ∼40 nJ pulse energy. The pulse can be de-chirped with a conventional grating pair compressor to ∼450 fs. Furthermore, the laser has a stable performance with relative intensity noise typically below the -130 dBc/Hz level for the idler pulses at 1700 nm from 10kHz to 16.95 MHz, half of the laser repetition rate f/2.

Design guidelines for normal-dispersion fiber optical parametric chirped-pulse amplifiers

We theoretically investigate methods of controlling pulse generation in normal-dispersion fiber optical parametric chirped-pulse amplifiers. We focus on high-energy, ultrashort pulses at wavelengths widely separated from that of the pump, and find that within this regime, a number of simple properties describe the essential phase and gain dynamics. Of primary importance are the relationships between the chirps of the pump, seed, and parametric gain, which we theoretically predict and then experimentally validate. By properly arranging these parameters, the signal and idler waves can be widely customized to fulfill a remarkable range of application requirements, spanning from narrowband to few-cycle.

Temporal Distribution Measurement of the Parametric Spectral Gain in a Photonic Crystal Fiber Pumped by a Chirped Pulse

The temporal distribution of the spectral parametric gain was experimentally investigated when a chirped pump pulse was injected into a photonic crystal fiber. A pump-probe experiment was developed and the important characteristics were measured as the chirp of the pump, the signal pulse, and the gain of the parametric amplifier. We highlight that the amplified spectrum depends strongly on the instantaneous pump wavelength and that the temporal evolution of the wavelength at maximum gain is not monotonic. This behavior is significantly different from the case in which the chirped pump has a constant peak power. This measurement will be very important to efficiently include parametric amplifiers in laser systems delivering ultra-short pulses.

Normal-dispersion fiber optical parametric chirped-pulse amplification

We demonstrate a fiber optical parametric chirped-pulse amplifier pumped in the normally dispersive regime. This approach is readily scalable, offering a route to microjoule-level, femtosecond pulses at new wavelengths. As a first demonstration, we pump with chirped pulses at 1.03 μm and seed with a continuous-wave beam at 0.85 μm, and are able to generate idlers at 1.3 μm with durations as short as 210 fs or energies as high as 180 nJ.

Ultra-broadband two-pump optical parametric amplifier in tellurite waveguides with engineered dispersion

The capacity of communication networks may be significantly improved by simply enhancing the optical amplifier bandwidth. This paper presents a numerical investigation of an ultra-broadband, low-ripple, two-pump-optical parametric amplifier (2P-OPA) that employs a tellurite glass buried-channel type nano-waveguide as nonlinear medium. The nano-waveguide was designed as a 25-cm-long Archimedean spiral that occupies a footprint of only ~2.5 mm², with a ~0.7 μm² effective cross section. Its zero-dispersion wavelength is ~1550 nm, the nonlinear coefficient is ~3000 W^-1 km^-1 _, and the attenuation coefficient is ~0.5 dB/m (1100 to 1900 nm). Simulations suggest a 2P-OPA based on such waveguide will be able to amplify 243 QPSK input channels modulated at 56 Gbps over 102 nm bandwidth, over metropolitan area network scales.

110 nm versatile fiber optical parametric amplifier at 1.0 μm

The fiber optical parametric amplifier (FOPA) has been well investigated and widely adopted at the telecommunication window, and outstanding progress has been achieved in areas such as high gain, wide bandwidths, and even flexible gain-spectrum shape. In contrast, a FOPA at the bio-favorable window, 1.0 μm, has been largely underexploited, especially for its relatively limited bandwidth. Here, we demonstrate an all-fiber single-pump FOPA at 1.0 μm with versatile performances, including ultrahigh gain (∼52  dB), wide bandwidth (∼110  nm), and good gain-spectrum flatness (∼3  dB). To showcase the practical applications, the FOPA is utilized to amplify the broadband optical image signal from a spectrally encoded microscopy, yielding a sensitivity enhancement of 47 dB. Thus, it is promising that this all-fiber versatile FOPA works well as an add-on module in boosting sensitivity for existing optical systems at a 1.0 μm window.

12 THz flat gain fiber optical parametric amplifiers with dispersion varying fibers

We report a fiber-optic parametric amplifier with ultra-broad and flat gain band by using a longitudinally tailored optical fiber. The parametric amplifier has been designed from realistic numerical simulations combined with an inverse algorithm to obtain a flat and wide gain band through fiber dispersion management. We experimentally report ~12 THz gain bandwidth on the Stokes side of the pump with a gain ripple as low as 7 dB and a mean gain up to ~60 dB. Experimental results show good agreement with numerical predictions for different pump powers and wavelength detuning.