1
|
Nagano A, Ihara T, Tanaka U, Hayasaka K. Multi-stage coherent beam combination of semiconductor optical amplifiers in ready-made fiber couplers. OPTICS EXPRESS 2024; 32:6903-6916. [PMID: 38439385 DOI: 10.1364/oe.511127] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/09/2023] [Accepted: 01/28/2024] [Indexed: 03/06/2024]
Abstract
We report on multi-stage coherent beam combination (CBC) of continuous-wave (CW) outputs from semiconductor optical amplifiers (SOAs) in ready-made fiber couplers. The first CBC stage combines two 120-mW outputs from SOAs seeded by an extended-cavity diode laser (ECDL) at 1458 nm in a 2×2 50%:50% fiber coupler. Two beams generated by two such CBC setups are then combined in the second stage. By concatenating three stages we obtained an output power of 723 mW at 1458 nm from eight SOAs with a total combining efficiency of 75.3%. Stable power generation without interrupts nor degradation over three days was successfully implemented using a simple low-bandwidth servo system. An averaged single-stage combining efficiency of 89.5% deduced from seven CBC setups constituting the three-stage CBC is used to estimate scaling to further stages. As a practical application the output is used to second harmonic generation (SHG) in a nonlinear crystal to achieve an output power of 239 mW at 729 nm.
Collapse
|
2
|
Wang Z, Liu L, Jiang P, Liao J, Xu J, Sun Y, Jin L, Lu Z, Feng J, Cao C. Innovative OPA-based optical chip for enhanced digital holography. OPTICS EXPRESS 2023; 31:44028-44043. [PMID: 38178484 DOI: 10.1364/oe.507097] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/02/2023] [Accepted: 12/01/2023] [Indexed: 01/06/2024]
Abstract
Digital holographic imaging has emerged as a transformative technology with significant implications for AR/VR devices. However, existing techniques often suffer from limitations such as restricted field of view (FOV), high power consumption, and contrast distortion. This paper introduces an innovative optical phased array (OPA)-based chip, integrating polarization, amplitude, and phase multiplexing for enhanced complex amplitude holographic imaging. A checkerboard-style staggered array is employed in the control strategy, substantially reducing power consumption and enabling the potential for large-scale array integration. To further enhance imaging quality, we introduce what we believe are two novel calibration strategies: one is to achieve super-resolution through block imaging methods, and the other is to image using sparse aperture methods. These advancements not only provide a robust foundation for high-quality holographic imaging, but also present a new paradigm for overcoming the inherent limitations of current active holographic imaging devices. Due to challenges in chip fabrication, the research is primarily simulation-based. Nevertheless, this work presents meaningful advancements in digital holographic imaging for AR/VR applications and provides a foundation for future experimental validations.
Collapse
|
3
|
Wang Q, Zhou J. Small-angle measurement system enhanced by an optical phased array. APPLIED OPTICS 2023; 62:7338-7345. [PMID: 37855590 DOI: 10.1364/ao.498711] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/22/2023] [Accepted: 09/06/2023] [Indexed: 10/20/2023]
Abstract
Small-angle measurement can be realized by embedding the laser beam in a reflective sector, within which multiple reflections enlarge the angle between the input and the output beams. However, the maximum detectable angle is limited by the detector aperture at the receiver side. In this work, we propose, to the best of our knowledge, a novel small-angle measurement system enhanced by an optical phased array (OPA), which is loaded on a spatial light modulator (SLM) to increase the maximum measurement range. The experimental results verify the effectiveness of the proposed system, and a wider measurement range with an unaffected measurement accuracy can be obtained. In the proof-of-concept demonstration, the measurement range of the system is enlarged by at least five times compared to the system without OPA, while maintaining the same measurement accuracy.
Collapse
|
4
|
McSorley S, Gozzard DR, Karpathakis SFE, Dix-Matthews BP, Schediwy SW. Stabilized free space optical frequency transfer using digitally enhanced heterodyne interferometry. OPTICS LETTERS 2023; 48:3637-3640. [PMID: 37450713 DOI: 10.1364/ol.492356] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/21/2023] [Accepted: 06/15/2023] [Indexed: 07/18/2023]
Abstract
Free-space continuous-wave laser interferometry using folded links has applications in precision measurement for velocimetry, vibrometry, optical communications, and verification of frequency transfer for metrology. However, prompt reflections from the transceiver optics degrade the performance of these systems, especially when the power of the returning signal is equal to or less than the power of the prompt reflections. We demonstrate phase stabilized free-space continuous-wave optical frequency transfer that exploits the auto-correlation properties of pseudo-random binary sequences to filter out prompt reflections. We show that this system significantly improves the stability and robustness of optical frequency transfer over a 750 m turbulent free-space channel, achieving a best fractional frequency stability of 8 × 10-20 at an integration time of τ = 512 s, and cycle-slip-free periods up to 162 min.
Collapse
|
5
|
Freier C, Legge S, Roberts L, Wigley PB, Close JD, Hardman KS. Scalable all-fiber coherent beam combination using digital control. APPLIED OPTICS 2022; 61:4543-4548. [PMID: 36256296 DOI: 10.1364/ao.456360] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/21/2022] [Accepted: 04/27/2022] [Indexed: 06/16/2023]
Abstract
This paper describes a filled-aperture coherent beam combining (CBC) system based on locking of optical coherence via single-detector electronic-frequency tagging (LOCSET). The sensing and control architecture is implemented using a field-programmable gate array and high-bandwidth electro-optic phase modulators. The all-fiber optical configuration consists of a narrow linewidth 1560 nm seed laser separated into three channels, each containing 7 W erbium-doped fiber amplifiers. The system was demonstrated experimentally, achieving a total stabilized output power of 20 W, a combination efficiency greater than 95%, and an output RMS phase stability of λ/493. As this architecture employs an entirely digital sensing and control scheme based on LOCSET, it presents a highly scalable and cost-effective solution for CBC that is wavelength agnostic and can support an arbitrarily large number of channels.
Collapse
|
6
|
Wang X, Liu C, Cao Y, Liu R, Zhang L, Zhao X, Lu F, Miao Z, Li Q, Han X. High-precision two-dimensional beam steering with a 64-element optical fiber phased array. APPLIED OPTICS 2021; 60:10002-10008. [PMID: 34807195 DOI: 10.1364/ao.434473] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/20/2021] [Accepted: 10/18/2021] [Indexed: 06/13/2023]
Abstract
Large-scale optical fiber phased arrays (OFPAs) are capable of realizing high-power lasers and high-speed beam steering, which are widely used in long-distance detection and communication. However, dephasing occurring from optical fiber jitter and power amplifier noise can reduce beam quality and steering precision in applications. We demonstrate a two-dimensional 64-element OFPA system that employs a stochastic parallel gradient descent algorithm to synchronize the phases and thus achieve high-quality multi-beam output. Using multi-beam steering, the total scan time for covering a certain field of view can be shorter compared to single-beam steering. Moreover, an avalanche photodiode array is used to enhance the precision of the voltage for beam steering. Experimental results show that the peak sidelobe ratio of the main beam achieves 23.7 dB, and the speed of the beam steering between two discretionary angles is 128 kHz.
Collapse
|
7
|
Wang Y, Wang Y, Yang G, Li Q, Zhang Y, Yan S, Wang C. All-Solid-State Optical Phased Arrays of Mid-Infrared Based Graphene-Metal Hybrid Metasurfaces. NANOMATERIALS (BASEL, SWITZERLAND) 2021; 11:1552. [PMID: 34208301 PMCID: PMC8231197 DOI: 10.3390/nano11061552] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 04/21/2021] [Revised: 05/28/2021] [Accepted: 06/10/2021] [Indexed: 11/23/2022]
Abstract
Optical phased arrays (OPAs) are essential optical elements in applications that require the ability to manipulate the light-wavefront, such as beam focusing and light steering. To miniaturize the optical components, active metasurfaces, especially graphene metasurfaces, are used as competent alternatives. However, the metasurface cannot achieve strong resonance effect and phase control function in the mid-infrared region only relying on a single-layer graphene. Here we present a graphene-metal hybrid metasurface that can generate a specific phase or a continuous sweep in the range of a 275°-based single-layer graphene structure. A key feature of our design is that the phase adjustment mainly depends on the combination mechanism of resonance intensity and frequency modulation. An all-solid-state, electrically tunable, and reflective OPA is designed by applying the bias voltage to a different pixel metasurface. The simulation results show that the maximum deflection angle of the OPA can reach 42.716°, and the angular resolution can reach 0.62°. This design can be widely applied to mid-infrared imaging, optical sensing, and optical communication systems.
Collapse
Affiliation(s)
- Yue Wang
- National Key Laboratory of Tunable Laser Technology, Harbin Institute of Technology, Harbin 150001, China; (Y.W.); (Y.W.); (Q.L.); (Y.Z.); (S.Y.)
- Shenzhen Glint Institute of AI and Robotics, Shenzhen 518057, China
| | - Yu Wang
- National Key Laboratory of Tunable Laser Technology, Harbin Institute of Technology, Harbin 150001, China; (Y.W.); (Y.W.); (Q.L.); (Y.Z.); (S.Y.)
| | - Guohui Yang
- School of Electronic and Information Engineering, Harbin Institute of Technology, Harbin 150001, China;
| | - Qingyan Li
- National Key Laboratory of Tunable Laser Technology, Harbin Institute of Technology, Harbin 150001, China; (Y.W.); (Y.W.); (Q.L.); (Y.Z.); (S.Y.)
| | - Yu Zhang
- National Key Laboratory of Tunable Laser Technology, Harbin Institute of Technology, Harbin 150001, China; (Y.W.); (Y.W.); (Q.L.); (Y.Z.); (S.Y.)
| | - Shiyu Yan
- National Key Laboratory of Tunable Laser Technology, Harbin Institute of Technology, Harbin 150001, China; (Y.W.); (Y.W.); (Q.L.); (Y.Z.); (S.Y.)
| | - Chunhui Wang
- National Key Laboratory of Tunable Laser Technology, Harbin Institute of Technology, Harbin 150001, China; (Y.W.); (Y.W.); (Q.L.); (Y.Z.); (S.Y.)
- Shenzhen Glint Institute of AI and Robotics, Shenzhen 518057, China
| |
Collapse
|
8
|
Li Y, Liu X, Li X, Wang S, Ye H, Zhang L, Li Y, Sun S, Chen B, Ma Y, Guo P, Gao F, Li X, Lo G, Song J. Surface illuminated interdigitated Ge-on-Si photodetector with high responsivity. OPTICS EXPRESS 2021; 29:16346-16361. [PMID: 34154200 DOI: 10.1364/oe.427343] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/08/2021] [Accepted: 05/05/2021] [Indexed: 06/13/2023]
Abstract
To address the problem of traditional surface illuminated detectors being of low responsivity, this work proposes a large-size interdigitated "finger-type" germanium-on-silicon (Ge-on-Si) photodetector (PD) based on the surface illumination approach. For 1550 nm light with a surface incident power of -20 dBm at room temperature, the best responsivity of the PD achieved is ∼0.64 A/W at 0.5 V. At the same time, the optimal bandwidth reaches 1.537 MHz with 3.5 V applied voltage. In order to suppress the dark current induced noise, a Ge-on-Si avalanche photodiode (APD) with the interdigitated structure is designed. The avalanche voltage is designed ∼13.3 V at room temperature, and the dark current density in linear region is at mA/cm2 order. We believe this type of device can be applied in weak light detection condition.
Collapse
|
9
|
Coherent Beam Combining Using an Internally Sensed Optical Phased Array of Frequency-Offset Phase Locked Lasers. PHOTONICS 2020. [DOI: 10.3390/photonics7040118] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/17/2022]
Abstract
Coherent beam combining can be used to scale optical power and enable mechanism-free beam steering using an optical phased array. Coherently combining multiple free-running lasers in a leader-follower laser configuration is challenging due to the need to measure and stabilize large and highly dynamic phase differences between them. We present a scalable technique based on frequency-offset phase locking and digitally enhanced interferometry to clone the coherence of multiple lasers without the use of external sampling optics, which has the potential to support both coherent and spectral beam combining, and alleviates issues of voltage wrapping associated with actuating feedback control using electro-optic modulators. This technique was demonstrated experimentally using a tiled-aperture optical phased array in which the relative output phase of three free-running lasers was stabilized with an RMS output phase stability of λ/104.
Collapse
|