In situ characterization of few-cycle laser pulses in transient absorption spectroscopy

Flexible experimental platform for dispersion-free temporal characterization of ultrashort pulses

The precise temporal characterization of laser pulses is crucial for ultrashort applications in biology, chemistry, and physics. Especially in femto- and attosecond science, diverse laser pulse sources in different spectral regimes from the visible to the infrared as well as pulse durations ranging from picoseconds to few femtoseconds are employed. In this article, we present a versatile temporal-characterization apparatus that can access these different temporal and spectral regions in a dispersion-free manner and without phase-matching constraints. The design combines transient-grating and surface third-harmonic-generation frequency-resolved optical gating in one device with optimized alignment capabilities based on a noncollinear geometry.

XUV-beamline for attosecond transient absorption measurements featuring a broadband common beam-path time-delay unit and in situ reference spectrometer for high stability and sensitivity

Measuring bound-state quantum dynamics, excited and driven by strong fields, is achievable by time-resolved absorption spectroscopy. Here, a vacuum beamline for spectroscopy in the attosecond temporal and extreme ultraviolet (XUV) spectral range is presented, which is a tool for observing and controlling nonequilibrium electron dynamics. In particular, we introduce a technique to record an XUV absorption signal and the corresponding reference simultaneously, which greatly improves the signal quality. The apparatus is based on a common beam path design for XUV and near-infrared (NIR) laser light in a vacuum. This ensures minimal spatiotemporal fluctuations between the strong NIR laser and the XUV excitation and reference beams, while the grazing incidence optics enable broadband spectral coverage. The apparatus combines high spectral and temporal resolution together with an increase in sensitivity to weak absorption signatures by an order of magnitude. This opens up new possibilities for studying strong-field-driven electron dynamics in bound systems on their natural attosecond time scale.

Direct measurement of intense sub-4-fs pulses in a gas target by 3rd-harmonic dispersion-scan

We demonstrate the on-target temporal characterization of sub-4-fs pulses by third-harmonic dispersion-scan, using a minimal in-line setup where a gas target optimized for high-harmonic generation doubles as nonlinear medium, obtaining excellent agreement with independent SEA-F-SPIDER measurements.

Universal route to optimal few- to single-cycle pulse generation in hollow-core fiber compressors

Gas-filled hollow-core fiber (HCF) pulse post-compressors generating few- to single-cycle pulses are a key enabling tool for attosecond science and ultrafast spectroscopy. Achieving optimum performance in this regime can be extremely challenging due to the ultra-broad bandwidth of the pulses and the need of an adequate temporal diagnostic. These difficulties have hindered the full exploitation of HCF post-compressors, namely the generation of stable and high-quality near-Fourier-transform-limited pulses. Here we show that, independently of conditions such as the type of gas or the laser system used, there is a universal route to obtain the shortest stable output pulse down to the single-cycle regime. Numerical simulations and experimental measurements performed with the dispersion-scan technique reveal that, in quite general conditions, post-compressed pulses exhibit a residual third-order dispersion intrinsic to optimum nonlinear propagation within the fiber, in agreement with measurements independently performed in several laboratories around the world. The understanding of this effect and its adequate correction, e.g. using simple transparent optical media, enables achieving high-quality post-compressed pulses with only minor changes in existing setups. These optimized sources have impact in many fields of science and technology and should enable new and exciting applications in the few- to single-cycle pulse regime.

Strategies for achieving intense single-cycle pulses with in-line post-compression setups

Intense few- and single-cycle pulses are powerful tools in different fields of science Today, third- and higher-order terms in the remnant spectral phase of the pulses remain a major obstacle for obtaining high-quality few- and single-cycle pulses from in-line post-compression setups. In this Letter, we show how input pulse shaping can successfully be applied to standard post-compression setups to minimize the occurrence of high-order phase components during nonlinear propagation and to directly obtain pulses with durations down to 3 fs. Furthermore, by combining this pulse shaping of the input pulse with new-generation broadband chirped mirrors and material addition for remnant third-order phase correction, pulses down to 2.2 fs duration have been measured.

Attosecond transient absorption instrumentation for thin film materials: Phase transitions, heat dissipation, signal stabilization, timing correction, and rapid sample rotation

We present an extreme ultraviolet (XUV) transient absorption apparatus tailored to attosecond and femtosecond measurements on bulk solid-state thin-film samples, specifically when the sample dynamics are sensitive to heating effects. The setup combines methodology for stabilizing sub-femtosecond time-resolution measurements over 48 h and techniques for mitigating heat buildup in temperature-dependent samples. Single-point beam stabilization in pump and probe arms and periodic time-zero reference measurements are described for accurate timing and stabilization. A hollow-shaft motor configuration for rapid sample rotation, raster scanning capability, and additional diagnostics are described for heat mitigation. Heat transfer simulations performed using a finite element analysis allow comparison of sample rotation and traditional raster scanning techniques for 100 Hz pulsed laser measurements on vanadium dioxide, a material that undergoes an insulator-to-metal transition at a modest temperature of 340 K. Experimental results are presented confirming that the vanadium dioxide (VO₂) sample cannot cool below its phase transition temperature between laser pulses without rapid rotation, in agreement with the simulations. The findings indicate the stringent conditions required to perform rigorous broadband XUV time-resolved absorption measurements on bulk solid-state samples, particularly those with temperature sensitivity, and elucidate a clear methodology to perform them.

Tracking the insulator-to-metal phase transition in VO2 with few-femtosecond extreme UV transient absorption spectroscopy

Coulomb correlations can manifest in exotic properties in solids, but how these properties can be accessed and ultimately manipulated in real time is not well understood. The insulator-to-metal phase transition in vanadium dioxide (VO₂) is a canonical example of such correlations. Here, few-femtosecond extreme UV transient absorption spectroscopy (FXTAS) at the vanadium M_2,3 edge is used to track the insulator-to-metal phase transition in VO₂ This technique allows observation of the bulk material in real time, follows the photoexcitation process in both the insulating and metallic phases, probes the subsequent relaxation in the metallic phase, and measures the phase-transition dynamics in the insulating phase. An understanding of the VO₂ absorption spectrum in the extreme UV is developed using atomic cluster model calculations, revealing V³⁺/d² character of the vanadium center. We find that the insulator-to-metal phase transition occurs on a timescale of 26 ± 6 fs and leaves the system in a long-lived excited state of the metallic phase, driven by a change in orbital occupation. Potential interpretations based on electronic screening effects and lattice dynamics are discussed. A Mott-Hubbard-type mechanism is favored, as the observed timescales and d² nature of the vanadium metal centers are inconsistent with a Peierls driving force. The findings provide a combined experimental and theoretical roadmap for using time-resolved extreme UV spectroscopy to investigate nonequilibrium dynamics in strongly correlated materials.

Time-resolved four-wave-mixing spectroscopy for inner-valence transitions

Noncollinear four-wave-mixing (FWM) techniques at near-infrared (NIR), visible, and ultraviolet frequencies have been widely used to map vibrational and electronic couplings, typically in complex molecules. However, correlations between spatially localized inner-valence transitions among different sites of a molecule in the extreme ultraviolet (XUV) spectral range have not been observed yet. As an experimental step toward this goal, we perform time-resolved FWM spectroscopy with femtosecond NIR and attosecond XUV pulses. The first two pulses (XUV-NIR) coincide in time and act as coherent excitation fields, while the third pulse (NIR) acts as a probe. As a first application, we show how coupling dynamics between odd- and even-parity, inner-valence excited states of neon can be revealed using a two-dimensional spectral representation. Experimentally obtained results are found to be in good agreement with ab initio time-dependent R-matrix calculations providing the full description of multielectron interactions, as well as few-level model simulations. Future applications of this method also include site-specific probing of electronic processes in molecules.