Lensless in-line holographic microscope with Talbot grating illumination

Experimental optimization of lensless digital holographic microscopy with rotating diffuser-based coherent noise reduction

Laser-based lensless digital holographic microscopy (LDHM) is often spoiled by considerable coherent noise factor. We propose a novel LDHM method with significantly limited coherent artifacts, e.g., speckle noise and parasitic interference fringes. It is achieved by incorporating a rotating diffuser, which introduces partial spatial coherence and preserves high temporal coherence of laser light, crucial for credible in-line hologram reconstruction. We present the first implementation of the classical rotating diffuser concept in LDHM, significantly increasing the signal-to-noise ratio while preserving the straightforwardness and compactness of the LDHM imaging device. Prior to the introduction of the rotating diffusor, we performed LDHM experimental hardware optimization employing 4 light sources, 4 cameras, and 3 different optical magnifications (camera-sample distances). It was guided by the quantitative assessment of numerical amplitude/phase reconstruction of test targets, conducted upon standard deviation calculation (noise factor quantification), and resolution evaluation (information throughput quantification). Optimized rotating diffuser LDHM (RD-LDHM) method was successfully corroborated in technical test target imaging and examination of challenging biomedical sample (60 µm thick mouse brain tissue slice). Physical minimization of coherent noise (up to 50%) was positively verified, while preserving optimal spatial resolution of phase and amplitude imaging. Coherent noise removal, ensured by proposed RD-LDHM method, is especially important in biomedical inference, as speckles can falsely imitate valid biological features. Combining this favorable outcome with large field-of-view imaging can promote the use of reported RD-LDHM technique in high-throughput stain-free biomedical screening.

Ptychography-based high-throughput lensless on-chip microscopy via incremental proximal algorithms

Ptychography-based lensless on-chip microscopy enables high-throughput imaging by retrieving the missing phase information from intensity measurements. Numerous reconstruction algorithms for ptychography have been proposed, yet only a few incremental algorithms can be extended to lensless on-chip microscopy because of large-scale datasets but limited computational efficiency. In this paper, we propose the use of accelerated proximal gradient methods for blind ptychographic phase retrieval in lensless on-chip microscopy. Incremental gradient approaches are adopted in the reconstruction routine. Our algorithms divide the phase retrieval problem into sub-problems involving the evaluation of proximal operator, stochastic gradient descent, and Wirtinger derivatives. We benchmark the performances of accelerated proximal gradient, extended ptychographic iterative engine, and alternating direction method of multipliers, and discuss their convergence and accuracy in both noisy and noiseless cases. We also validate our algorithms using experimental datasets, where full field of view measurements are captured to recover the high-resolution complex samples. Among these algorithms, accelerated proximal gradient presents the overall best performance regarding accuracy and convergence rate. The proposed methods may find applications in ptychographic reconstruction, especially for cases where a wide field of view and high resolution are desired at the same time.

Dual wavelength Talbot self-imaging using facet patterned nonlinear crystals

A method for functional patterning of facets of a nonlinear crystal using focused ion beam milling has been developed. The near-field diffraction on periodic gratings has been experimentally and theoretically studied. The periodicity of the structure enables Talbot self-imaging at the fundamental and second-harmonic frequencies simultaneously. Spatial interference patterns for both harmonic frequencies are individual ones, which can enable the higher-accuracy optical testing, coupling the radiation at both frequencies, and wavelength-division demultiplexing. The impact of the aperture effect on a Talbot carpet is discussed.

Field-portable quantitative lensless microscopy based on translated speckle illumination and sub-sampled ptychographic phase retrieval

We report a compact, cost-effective, and field-portable lensless imaging platform for quantitative microscopy. In this platform, the object is placed on top of an image sensor chip without using a lens. We use a low-cost galvo scanner to rapidly scan an unknown laser speckle pattern on the object. To address the positioning repeatability and accuracy issues, we directly recover the positional shifts of the speckle pattern based on the phase correlation of the captured images. To bypass the resolution limit set by the imager pixel size, we employ a sub-sampled ptychographic phase retrieval process to recover the complex object. We validate our approach using a resolution target, phase target, and biological sample. Our results show that accurate, high-quality complex images can be obtained from a lensless dataset with as few as ∼10 images. We also demonstrate the reported approach to achieve a 6.4-mm by 4.6-mm field of view and a half-pitch resolution of 1 μm. The reported approach may provide a quantitative lensless imaging strategy for addressing point-of-care-, global-health-, and telemedicine-related challenges.

Multilayer pixel super-resolution lensless in-line holographic microscope with random sample movement

We report a multilayer lensless in-line holographic microscope (LIHM) with improved imaging resolution by using the pixel super-resolution technique and random sample movement. In our imaging system, a laser beam illuminated the sample and a CMOS imaging sensor located behind the sample recorded the in-line hologram for image reconstruction. During the imaging process, the sample was moved by hand randomly and the in-line holograms were acquired sequentially. Then the sample image was reconstructed from an enhanced-resolution hologram obtained from multiple low-resolution in-line holograms by applying the pixel super-resolution (PSR) technique. We studied the resolution enhancement effects by using the U.S. Air Force (USAF) target as the sample in numerical simulation and experiment. We also showed that multilayer pixel super-resolution images can be obtained by imaging a triple-layer sample made with the filamentous algae on the middle layer and microspheres with diameter of 2 μm on the top and bottom layers. Our pixel super-resolution LIHM provides a compact and low-cost solution for microscopic imaging and is promising for many biomedical applications.

Resolution enhancement method for lensless in-line holographic microscope with spatially-extended light source

We propose a resolution enhancement method for lensless in-line holographic microscope (LIHM) with spatially-extended light source, where the resolution is normally deteriorated by the insufficient spatial coherence of the illumination. In our LIHM setup, a light-emitting diode (LED), which was a spatially-extended light source, directly illuminated the sample, and the in-line hologram were recorded by a CMOS imaging sensor located behind the sample. In our holographic reconstruction process, the in-line hologram was first deconvoled with a properly resized image of the LED illumination area, and then back-propagated with scalar diffraction formula to reconstruct the sample image. We studied the hologram forming process and showed that the additional deconvolution process besides normal scalar diffraction reconstruction in LIHM can effectively enhance the imaging resolution. The resolution enhancements capability was calibrated by numerical simulations and imaging experiments with the U.S. air force target as the sample. We also used our LIHM to image the wing of a green lacewing to further demonstrate the capability of our methods for practical imaging applications. Our methods provide a way for LIHM to achieve satisfactory resolution with less stringent requirement for spatial coherence of the source and could reduce the cost for compact imaging system.