Spectral broadening of ultraviolet dispersive waves in gas-filled hollow-core fiber using pump pulse modulation

High-power supercontinuum lasers with a flat blue spectrum through pump modulation: a numerical study

We numerically investigate high-power, modulational instability-based supercontinuum sources. Such sources have spectra that reach the infrared material absorption edge and as a result the spectrum has a strong narrow blue peak (dispersive wave group velocity matched to solitons at the infrared loss edge) followed by a significant dip in the neighboring longer-wavelength region. In a wide range of applications one prefers a broader and more flat blue part within a certain minimum and maximum power spectral density. From the perspective of fiber degradation it would be desirable to achieve this at reduced pump peak powers. We show that it is possible to improve the flatness by more than a factor of 3 by modulating the input peak power, although this comes at the expense of slightly higher relative intensity noise. Specifically, we consider a standard 6.6 W, 80 MHz supercontinuum source with a 455 nm blue edge, which uses 7 ps pump pulses. We then modulate its peak power to generate a pump pulse train having two and three different sub-pulses.

Enhancement of UV-visible transmission characteristics in wet-etched hollow core anti-resonant fibers

We report on the feasibility of short-wavelength transmission window modification in anti-resonant hollow core fibers using post-processing by hydrofluoric (HF) acid etching. Direct drawing of stacked anti-resonant hollow core fibers with sub-micron thin cladding capillary membranes is technologically challenging, but so far this has been the only proven method of assuring over an octave-spanning transmission windows across the visible and UV wavelengths. In this study we revealed that low HF concentration allows us to reduce the thickness of the cladding capillary membranes from the initial 760 nm down to 180 nm in a controlled process. The glass etching rates have been established for different HF concentrations within a range non-destructive to the anti-resonant cladding structure. Etching resulted in spectral blue-shifting and broadening of anti-resonant transmission windows in all tested fiber samples with lengths between 15 cm and 75 cm. Spectrally continuous transmission, extending from around 200 nm to 650 nm was recorded in 75 cm long fibers with cladding membranes etched down to thickness of 180 nm. The experiment allowed us to verify the applicability and feasibility of controlling a silica fiber post-processing technique, aimed at broadening of anti-resonant transmission windows in hollow core fibers. A practical application of the processed fiber samples is demonstrated with their simple butt-coupling to light-emitting diodes centered at various ultraviolet wavelengths between 265 nm and 365 nm.