Sub-100 fs pulse generation from a Kerr-lens mode-locked Yb:Lu2O3 ceramic thin-disk laser

High-power modelocked thin-disk oscillators as potential technology for high-rate material processing

High average power femtosecond lasers have made spectacular progress in the last decades - moving from laboratory-based systems with maximum average powers of tens of watts to kilowatt-class mature industrial systems in a short time. The availability of such systems opens new possibilities in many fields; one of the most prominent ones that have driven many of these technological advances is precise high-speed material processing, where ultrashort pulses have long been recognized to provide highest precision processing of virtually any material, and high average power extends these capabilities to highest processing rates. Here, we focus our attention on one high-average power technology with large unexplored potential for this specific application: directly modelocked multi-MHz repetition frequency high-power thin-disk oscillators. We review their latest state-of-the-art and discuss future directions and challenges, specifically with this application field in mind.

Kerr-lens mode-locked Yb:LuAG ceramic thin-disk laser

A Kerr-lens mode-locked (KLM) thin-disk laser with Yb:LuAG ceramic was demonstrated. Yb:LuAG ceramic is an attractive material for high-power lasers due to its high thermal conductivity and large emission cross section. The highest output power of 17 W with a pulse duration of 130 fs was achieved. Moreover, the pulse duration of 88 fs was also obtained with a high-Q factor cavity. To the best of our knowledge, this is the first demonstration of a KLM thin-disk laser based on Yb:LuAG, including both ceramic and single crystal. The results show the usefulness of ceramic thin disks for high-power ultrashort pulse laser sources.

10-W-scale Kerr-lens mode-locked Yb:CALYO laser with sub-100-fs pulses

We reported a high-power pure Kerr-lens mode-locked Yb:CALYO laser based on the dual-confocal cavity delivering sub-100-fs pulses. The output pulses at 81 MHz have an average power of 10.4 W and the pulse duration of 98 fs, corresponding to the peak power of 1.14 MW. This is, to the best of our knowledge, the highest average power ever reported for a Kerr-lens mode-locked Yb-bulk oscillator. Analysis of the dual-confocal cavity was also conducted, which indicates a way to achieve higher average power. We believe the result described in this Letter may pave a way to develop Kerr-lens mode-locked bulk lasers with much higher average power.

Pressureless Crystallization of Glass for Transparent Nanoceramics

Transparent nanoceramics embedded with highly dense crystalline domains are promising for applications in missile guidance, infrared night vision, and laser and nuclear radiation detection. Unfortunately, current nanoceramics are strictly constrained by the stringent construction procedures such as super-high pressure and containerless processing. Here, a pressureless crystallization engineering strategy in glass for elaboration of transparent nanoceramics and fibers is proposed and experimentally demonstrated. By intentional creation of a sharp contrast between nucleation and growth rates, the crystal growth rate during glass crystallization can be significantly suppressed. Importantly, this unique phase-transition habit enables the achievement of transparent nanoceramics and even smooth fibers with extremely tiny crystalline size (≈20 nm) and high crystallinity (≈97%) under atmospheric pressure. This allows the generation of an attractive nonlinear optical response such as dynamic optical filtering and luminescence in the mid-infrared waveband of 4300-4950 nm. These findings highlight that the strategy to switch the phase-transition habit of glass into the unconventional crystallization regime may provide new opportunities for the creation of next-generation nanoceramics and fibers.