Temperature-insensitive curvature sensor based on Bragg gratings written in strongly coupled multicore fiber

Cascaded multicore fiber interferometers for enhanced bending sensing based on the Vernier effect

In this paper, cascaded modal interferometers constructed by strongly-coupled seven-core fiber (SC-SCF) with different lengths are demonstrated for enhanced bending sensing based on Vernier effect. The free spectral range (FSR) of a single SC-SCF interferometer is determined by the length of SC-SCF. Two SC-SCF interferometers with different FSRs are cascaded, in which, one functions as the sensor while the other functions as the reference. The wavelength shift of the envelope of the output spectrum is much larger than that of a single SC-SCF interferometer due to the Vernier effect. Therefore, enhanced sensing can be achieved. Experimental results show that the bending sensitivity of the proposed sensor is improved from -2.20 nm/m-1 (single SC-SCF interferometer) to 42.32 nm/m-1 (cascaded SC-SCF interferometers). The temperature response of the sensor is also investigated. Our proposed cascaded SC-SCF sensor has advantages of high sensitivity, ease of fabrication, and low cost. It is attractive for high precision bending sensing applications.

Supermode Bragg grating inscribed in a strongly coupled seven-core fiber and its responses to temperature and curvature

A Bragg grating is successfully inscribed in a piece of strongly coupled seven-core fiber (SCF). There are two separate Bragg resonance notches observed in the transmission spectrum, corresponding to backward coupling of HE₁₁-like and HE₁₂-like supermodes of the SCF. The mode coupling mechanism of the Bragg grating is theoretically investigated via modeling and analyzing modal properties of the SCF. The theoretical results agree well with the experimental results. Since the SCF is spliced between two standard single mode fibers with central alignments at both ends, the transmission spectrum of the device also contains a set of interference fringe due to modal interference between the supermodes. The device's responses to temperature and curvature are experimentally measured, respectively. The obtained temperature sensitivities and curvature sensitivities of the supermode Bragg grating notches are 9.55 pm/°C and 9.55 pm/°C, -1.8 pm/m^-1 and -112.3 pm/m^-1, respectively. The obtained temperature sensitivity and curvature sensitivity of one of the interference spectrum dips are 11.8 pm/°C and -3909.8 pm/m^-1, respectively. This device is potentially useful for simultaneous measurement of temperature and curvature.

Highly sensitive curvature sensor based on a sandwich multimode fiber Mach-Zehnder interferometer

A highly sensitive optical fiber Mach-Zehnder interference curvature sensor based on MMF-GIMMF-MMF, which was made by sandwiching the graded-index multimode fiber (GIMMF) between two pieces of very short stepped-index multimode fibers (SIMMFs) spliced with input-single-mode fiber (SMF) and output-SMF, respectively, was proposed. The core diameter of the SIMMFs and GIMMF was 105 µm and 50 µm, respectively, and cladding diameter of them were both 125 µm. The sensing principle of the MMF-GIMMF- MMF sensors and the influences of structure parameters on the interference spectrum characteristics were theoretically analyzed in detail. Experimental results showed that when the length of the GIMMF was short enough (usually ≤ 10 mm), interference spectrum was induced by the interaction between the core modes and the low-order cladding modes due to the special structure of the designed Mach-Zehnder interferometer. Intensity of the interference valleys was highly sensitive to the applied bending but nearly independent of the surrounding temperature, on the contrary, the dip wavelength showed negligible sensitivity to the applied bending but relatively high temperature sensitivity. Thus, a temperature- independent curvature sensor could be realized by tracing the intensity variation of interference valley. In addition, different interference valley exhibited different intensity-based curvature sensitivity, providing more options for curvature sensing applications. Especially, total length of the sensor could be as short as 3 mm with length of GIMMF and SIMMFs only 1mm, the maximum curvature sensitivity could reach up to -78.75 dB/m^-1 in the small curvature range of 0-2.36 m^-1. Owing to its compact size, easy fabrication, good reproducibility and low cost, the proposed sensor is promising for bending-related high-precision engineering applications.

Femtosecond laser-inscribed off-axis high-order mode long-period grating for independent sensing of curvature and temperature

We propose and demonstrate a novel curvature and temperature sensor based on an off-axis small-period long-period fiber grating (SP-LPG) which is inscribed in a single mode fiber by a femtosecond laser in one step. The total length of the SP-LPG is only 2.1 mm. The period of the SP-LPG is 30 µm, which is smaller than that of conventional long period fiber gratings. Essentially, the SP-LPG is a high-order mode long period fiber grating. Due to the off-axis structure, the SP-LPG can be used for two-dimensional vector bending sensing. The curvature can be demodulated by the intensity variation of the dips in the transmission spectrum. When the incident light is polarized, the instantaneous curvature sensitivity of the SP-LPG can exceed 20 dB/m^-1. Meanwhile, a series of Bragg resonant peaks can be observed in the reflection spectrum, which can be used to monitor the fluctuation of temperature. The transmission dip is insensitive to temperature and the reflection peak is insensitive to curvature, which allows the SP-LPG to measure curvature and temperature independently. The characteristics of high curvature sensitivity, two-dimensional bending direction identification, real-time temperature measurement, and compact structure make the device expected to be applied in the field of structural health monitoring and intelligent robotics.

Coupled-core fiber Bragg gratings for low-cost sensing

Sensors based on Bragg gratings inscribed in conventional single mode fibers are expensive due to the need of a sophisticated, but low-speed, interrogation system. As an alternative to overcome this issue, in this work, it is proposed and demonstrated the use of coupled-core optical fiber Bragg gratings. It was found that the relative reflectivity from such gratings changed when the coupled-core fiber was subjected to point or periodic bending. This feature makes the interrogation of such gratings simple, fast, and cost-effective. The reflectivity changes of the gratings are attributed to the properties of the supermodes supported by the coupled-core fiber. As potential applications of the referred gratings, intensity-modulated vector bending and vibration sensing are demonstrated. We believe that the results reported here can pave the way to the development of many inexpensive sensors. Besides, coupled-core fiber Bragg gratings may expand the use of grating technology in other areas.