PVA-SM microstructure enhanced ratiometric fluorescence probe for formaldehyde detection in solution and gas

Fluorimetric determination of aqueous formaldehyde employing heating and ultrasound-assisted approach through its derivatization with a ß-diketone-nickel(2+) complex immobilized in a PMMA flow cell

Formaldehyde (FA) is a highly toxic substance present in many matrices, including freshwater as well as found in natural mechanisms such as rainfall and combustion of organic matter. Consumption of water contaminated with high levels of FA can cause severe short-term or long-term health problems. Due to these health risks, procedures are necessary to determine and quantify FA in aqua sources This paper reports on a study of fluorimetric determination of FA using a nickel(2 + )-diketonate coordination compound immobilized as a solid precursor. The compound was characterized by electronic absorption, Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), thermogravimetry (TG), optical microscopy (OM), and scanner electron microscopy (SEM). The methodology was based on the reaction of the synthesized compound with an ammoniacal buffer generating a selective reagent for formaldehyde: fluoral-P. The product of the reaction generates 3,5-diacetyl-1,4-dihydrolutidine (DDL), which is responsible for the fluorescence of the system. Several parameters such as temperature, duration of heating time, and dilution effect with the best effects were studied to carry out FA determination. Under the optimum experimental conditions, a linear response ranging from 1.0 to 10.0 mg/L FA (R = 0.997 and n = 10), and a detection (3σ criterion) and quantification (10 σ criterion) limit estimated at 0.129 and 0.389 mg/L, respectively were achieved. The FA analysis was able to be conducted in 05 min with a relative standard deviation estimated at 1.10 %.

Highly stable and recoverable humidity sensor using fluorescent quantum dot film

Fluorescent sensors are resistant to electromagnetic interference and are electrically insulated, allowing for highly accurate measurements. Quantum dots (QDs) serve as outstanding sensing materials owing to the unique optical properties such as tunable photoluminescence (PL), excellent visible light activity, and high chemical and physical stability. In this paper, we develop an optical humidity sensor based on a QDs nanocomposite film. The film is made of polyvinyl alcohol (PVA), SiO₂ microsphere (SM), and QDs through the layer-by-layer self-assembly method. The mechanism of humidity detection is moisture-induced quenching of the QDs fluorescence intensity. The results reveal that our sensor shows a good linear response to relative humidity in the range of 5% to 97%, a fast response-recovery time of 25 s and 20 s, and good repeatability for more than 50 cycles as well as high stability for over 180 days. Possessing the remarkable property, optical humidity sensors are envisaged for great potential applications in environmental monitoring.