Broadband second-harmonic generation in step-chirped periodically poled lithium niobate waveguides

Extremely high extinction ratio electro-optic modulator via frequency upconversion to visible wavelengths

Intensity modulators are fundamental components for integrated photonics. From near-infrared (NIR) to visible spectral ranges, they find applications in optical communication and quantum technologies. In particular, they are required for the control and manipulation of atomic systems such as atomic clocks and quantum computers. Typical integrated electro-optic modulators operating at these wavelengths show high bandwidth and low-voltage operation, but their extinction ratios are moderate. Here we present an integrated thin-film lithium niobate electro-optic (EO) modulator operating in the C-band, which uses a subsequent periodically poled waveguide to convert the modulated signal from 1536 to 768 nm using the second-harmonic (SH) generation. We demonstrate that the upconverted signal retains the characteristics of the modulated input signal, reaching a measured high bandwidth of 35 GHz. Due to the nature of the nonlinear process, it exhibits, with respect to the fundamental signal, a doubled extinction ratio of 46 dB, which is the highest, to the best of our knowledge, recorded for near-infrared light on this platform.

Tunable sum-frequency generation in modal phase-matched thin film lithium niobate rib waveguides

In this work, we report a highly efficient and tunable on-chip sum-frequency generation (SFG) on a thin-film lithium niobate platform via modal phase matching (e + e→e). It provides on-chip SFG a solution with both high efficiency and poling-free by using the highest nonlinear coefficient d₃₃ instead of d₃₁. The on-chip conversion efficiency of SFG is approximately 2143%W^-1 with a full width at half maximum (FWHM) of 4.4 nm in a 3-mm-long waveguide. It can find applications in chip-scale quantum optical information processing and thin-film lithium niobate based optical nonreciprocity devices.

150 Gbps multi-wavelength FSO transmission with 25-GHz ITU-T grid in the mid-infrared region

The 3∼5 µm mid-infrared (mid-IR) light has several exceptional benefits in the case of adverse atmospheric conditions compared to the 1.5 µm band, so it is a promising candidate for optical carriers for free-space communication (FSO) through atmospheric channels. However, the transmission capacity in the mid-IR band is constrained in the lower range due to the immaturity of its devices. In this work, to replicate the 1.5 µm band dense wavelength division multiplexing (DWDM) technology to the 3 µm band for high-capacity transmission, we demonstrate a 12-channel 150 Gbps FSO transmission in the 3 µm band based on our developed mid-IR transmitter and receiver modules. These modules enable wavelength conversion between the 1.5 µm and 3 µm bands based on the effect of difference-frequency generation (DFG). The mid-IR transmitter effectively generates up to 12 optical channels ranging from 3.5768 µm to 3.5885 µm with a power of 6.6 dBm, and each channel carries 12.5 Gbps binary phase shift keying (BPSK) modulated data. The mid-IR receiver regenerates the 1.5 µm band DWDM signal with a power of -32.1 dBm. Relevant results of regenerated signal demodulation have been collected in detail, including bit error ratio (BER), constellation diagram, and eye diagram. The power penalties of the 6th to 8th channels selected from the regenerated signal are lower than 2.2 dB compared with back-to-back (BTB) DWDM signal at a bit error ratio (BER) of 1E-6, and other channels can also achieve good transmission quality. It is expected to further push the data capacity to the terabit-per-second level by adding more 1.5 µm band laser sources and using wider-bandwidth chirped nonlinear crystals.

Second-harmonic and cascaded third-harmonic generation in generalized quasiperiodic poled lithium niobate waveguides

Lithium niobate (LN) thin film has recently emerged as an important platform for nonlinear optical investigations for its large χ⁽²⁾ nonlinear coefficients and ability of light localization. In this Letter, we report the first, to the best of our knowledge, fabrication of LN-on-insulator ridge waveguides with generalized quasiperiodic poled superlattices using the electric field polarization technique and microfabrication techniques. Benefiting from the abundant reciprocal vectors, we observed efficient second-harmonic and cascaded third-harmonic signals in the same device, with normalized conversion efficiency of 1735% W^-1 cm^-2 and 0.41% W^-2 cm^-4, respectively. This work opens a new direction for nonlinear integrated photonics based on LN thin film.

Broadband second-harmonic generation in an angle-cut lithium niobate-on-insulator waveguide by a temperature gradient

Frequency conversion via nonlinear wave mixing is an important technology to broaden the spectral range of lasers, propelling their applications in optical communication, spectroscopy, signal processing, and quantum information. Many applications require not only a high conversion efficiency but also a broad phase matching bandwidth. Here, we demonstrate broadband birefringence phase matching (BPM) second-harmonic generation (SHG) in angle-cut lithium niobate-on-insulator (LNOI) ridge waveguides based on a temperature gradient scheme. The bandwidth and shift of the phase matching spectrum can be effectively tuned by controlling the temperature gradient of the waveguide. Broadband SHG of a telecom C-band femtosecond laser is also demonstrated. The approach may open a new avenue for tunable broadband nonlinear frequency conversion in various integrated photonics platforms.

Broadband yellow-orange light generation based on a step-chirped PPMgLN ridge waveguide

Yellow-orange lights, valuable in photodynamic therapies, spectroscopy, and optogenetics, are limited by the narrow bandwidth and bulky setup via the conventional Raman or optical parametric oscillation processes. Moreover, flatness in the broad-band spectrum is also important for the aforementioned applications with extended functions. In this paper, by carefully designing grating-periods of a step-chirped PPMgLN ridge waveguide for sum frequency generation (SFG), we report a compact broad-band yellow-orange light with bandwidth of 5.6 nm and an un-reported flatness (<1.5 dB). Correspondingly, the optical conversion efficiency is 232.08%/W, which is the best SFG efficiency for PPMgLN at the yellow-orange region, to the best of our knowledge. The results could also be adopted for other broad-band SFG process toward the vis-infrared region in an integrated structure.