Narrow bandwidth spatiotemporal mode-locked Yb-doped fiber laser

Transverse mode switchable mode-locked laser with narrow bandwidth

Transverse mode switchable ultrashort optical pulses with narrow bandwidths can create potential for exploring what we believe are new physical effects. We demonstrate the generation of transverse mode switchable ultrashort pulses with narrow bandwidths in an all-fiber mode-locked laser by exploring a mode-selective photonic lantern (MSPL). The laser cavity serves not only as a ring resonator but also as an intrinsic spectral filter. For mode-locking with the LP01, LP11a, and LP11b modes, the bandwidths are 3.0 nm, 86.7 pm and 101.7 pm, respectively. The narrowband pulses with higher-order modes are generated by an intrinsic spectral filter due to the spectral-domain intermodal interference. Mode-locked pulses with a signal-to-noise ratio better than 60 dB for LP01, LP11a, and LP11b modes are independently generated, i.e., transverse mode switchable by changing the input port of the MSPL. The mode-locked wavelength can be tuned for the LP11a mode and LP11b mode by adjusting the state of polarization. Furthermore, our experimental results also show that, the slope efficiency of LP11a and LP11b modes can be improved, by the use of LP11 mode pump scheme. We anticipate that, narrowband pulses with complex mode profiles can be generated by simultaneously phase-locked transverse and longitudinal modes.

A High-Energy, Wide-Spectrum, Spatiotemporal Mode-Locked Fiber Laser

In this article, we demonstrate a high-energy, wide-spectrum, spatiotemporal mode-locked (STML) fiber laser. Unlike traditional single-mode fiber lasers, STML fiber lasers theoretically enable mode-locking with various combinations of transverse modes. The laser can deliver two different STML pulse sequences with different pulse widths, spectra and beam profiles, due to the different compositions of transverse modes in the output pulses. Moreover, we achieve a wide-spectrum pulsed output with a single-pulse energy of up to 116 nJ, by weakening the spectral filtering and utilizing self-cleaning. Strong spatial and spectral filtering are usually thought to be necessary for achieving STML. Our experiment verifies the necessity of spatial filtering for achieving STML, and we show that weakening unnecessary spectral filtering provides an effective way to increase the pulse energy and spectrum width of mode-locked fiber lasers.

All-multimode fiber spatiotemporal mode-locked figure-eight laser based on multimode gain fiber

In this paper, we report for the first time on an all-multimode fiber spatiotemporal mode-locked figure-eight laser operating at 1.0 µm. This laser utilizes a multimode gain fiber and a nonlinear amplifying loop mirror mechanism. It can generate mode-locked noise-like pulses at different central wavelengths. Additionally, we observed the presence of a multi-soliton state within the cavity by reducing intracavity gain. This study contributes to a broader investigation of various pulse phenomena in spatiotemporal mode-locked lasers and provides valuable insights into further exploring the evolution of spatiotemporal dynamics in such systems.

Buildup of multiple spatiotemporal nonlinear dynamics in an all-fiber multimode laser

Ultrafast lasers based on multimode fibers have attracted extensive attention owing to the large mode-field area and nonlinear tolerance. The high spatial degree of freedom of multimode fibers is significant for spatiotemporal pulses locked both in transverse and longitudinal modes, where the energy of output pulses can be remarkably improved. Herein, the 1.5-μm all-fiber spatiotemporal mode-locked laser was realized based on carbon nanotubes as a saturable absorber. Moreover, by tuning the polarization controller and the pump power carefully, the output wavelengths can be ranged from 1529 to 1565 nm based on the multimode interference filter. In addition, Q-switched mode-locking and spatiotemporal mode-locked dual combs were also observed by further adjusting the polarization controller. Such a kind of an all-fiber multimode laser offers a crucial insight into the spatiotemporal nonlinear dynamics, which is of great significance in scientific research and practical applications.

Wavelength-tunable broadband lasers based on nanomaterials

Nanomaterials are widely used in the fields of sensors, optoelectronics, biophotonics and ultrafast photonics due to their excellent mechanical, thermal, optical, electrical and magnetic properties. Particularly, owing to their nonlinear optical properties, fast response time and broadband operation, nanomaterials are ideal saturable absorption materials in ultrafast photonics, which contribute to the improvement of laser performance. Therefore, nanomaterials are of great importance to applications in wavelength-tunable broadband pulsed lasers. Herein, we review the integration and applications of nanomaterials in wavelength-tunable broadband ultrafast photonics. Firstly, the two integration methods, which are direct coupling and evanescent field coupling, and their characteristics are introduced. Secondly, the applications of nanomaterials in wavelength-tunable broadband lasers are summarized. Finally, the development of nanomaterials and broadband tunable lasers is reviewed and discussed.

Dissipative soliton resonance in a figure-eight multimode fiber laser

We report, for the first time to the best of our knowledge, a spatiotemporal mode-locked (STML) multimode fiber laser based on nonlinear amplifying loop mirror (NALM), generating dissipative soliton resonance (DSR) pulses. Due to the complex filtering characteristics caused by the inherent multimode interference filtering structure and NALM in the cavity, the STML DSR pulse has wavelength tunable function. What's more, kinds of DSR pulses are also achieved, including multiple DSR pulses, and the period doubling bifurcations of single DSR pulse and multiple DSR pulses. These results contribute to further understand the nonlinear properties of STML lasers and may shed some light on improving the performance of the multimode fiber lasers.

Nonlinear dynamics of beam self-cleaning on LP11 mode in multimode fibers

We investigate the modal energy flow of the femtosecond-pulsed beam self-cleaning on LP₁₁ mode with the influence of different factors such as the initial fraction of LP₁₁ mode, initial peak power, distribution of high-order modes and the numerical aperture of the fiber. It is interesting that there is a critical value of the initial peak power, Pcr, which is the watershed, not only in the quantitatively dominant transverse mode converting from LP₁₁ mode to LP₀₁ mode, but also in the behavior of HOMs of the transition from Attractor to chaos. Our simulation results may provide a novel perspective to understanding the beam self-cleaning on LP₁₁ mode.