Wave-band-tunable optical fiber broadband orbital angular momentum mode converter based on dispersion turning point tuning technique

Full C- and L-band covered second-order OAM mode generator based on a thinned helical long-period fiber grating

A full C- and L-band covered second-order orbital-angular-momentum (OAM) mode generator has been proposed and experimentally demonstrated, which is realized by using a helical long-period fiber grating (HLPG) but inscribed in a thinned four-mode fiber. By optimizing the design of grating period and fiber diameter of the proposed HLPG, an ultra-broadband rejection filter with a depth of ∼23 dB, a bandwidth of ∼156 nm @-10 dB (ranging from 1522 nm to 1678 nm) and a bandwidth of ∼58 nm @-20 dB (ranging from 1574 nm to 1632 nm), has been successfully obtained as a typical sample. To the best of our knowledge, this is the first demonstration of such ultra-broadband second-order OAM mode generator by using only one fiber component, i.e., the thinned HLPG. In addition, the proposed generator is less polarization-dependent and less temperature-sensitive than those of the conventional HLPGs, which is believed to be considerably helpful to find potential applications of the device itself in wavelength division multiplexing (WDM) and OAM mode division multiplexing (MDM) optical fiber communication systems.

On-demand flat-top wideband OAM mode converter based on a cladding-etched helical fiber grating

A new method enabling to provide an on-demand flat-top wideband orbital angular momentum (OAM) mode converter is proposed and experimentally demonstrated, which is based on utilization of a cladding-etched helical long-period fiber grating (CEHLPG). By appropriately selecting the grating period and precisely controlling the diameter of the CEHLPG in-situ, both the radial order and central wavelength of the flat-top band for the generated OAM mode can be flexibly tailored according to specific requirements. As typical examples, the first azimuthal order OAM modes with a flat-top bandwidth of 95 nm at -20 dB, a central operating wavelength of ∼1500 nm, and the radial-orders of 9, 8, 5, and 2, respectively, have been demonstrated consecutively. The proposed method provides an excellent flexibility and robustness in controlling both the radial order and the central wavelength of the resulting flat-top wideband OAM mode conversion, which may support a variety of practical optical vortex applications.

Fabrication of High-Sensitivity Optical Fiber Sensor by an Improved Arc-Discharge Heating System

We proposed a high-sensitivity optical fiber sensor based on a dual-resonance helical long-period fiber grating (HLPG). The grating is fabricated in a single-mode fiber (SMF) by using an improved arc-discharge heating system. The transmission spectra and the dual-resonance characteristics of the SMF-HLPG near the dispersion turning point (DTP) were studied through simulation. In the experiment, a four-electrode arc-discharge heating system was developed. The system can keep the surface temperature of optical fiber relatively constant during the grating preparation process, which shows an advantage in preparing high-quality triple- and single-helix HLPGs. In particular, benefiting from this manufacturing system, the SMF-HLPG operating near the DTP was successfully prepared directly by arc-discharge technology, without secondary processing of the grating. As a typical application example of the proposed SMF-HLPG, physical parameters such as temperature, torsion, curvature and strain can be measured with high sensitivity by monitoring the variation of the wavelength separation in the transmission spectrum. Therefore, the proposed sensor and its fabrication technology have potential application prospects in practical sensing measurement.