Development of a Stability-Indicating LC Assay Method for Determination of Chloroquine

Convex optimization for maximizing the degradation efficiency of chloroquine in a flow-by electrochemical reactor

The degradation efficiency of chloroquine phosphate (CQ), an anti-COVID-19 drug, was investigated in a flow-by electrochemical reactor (FBER) provided with two boron-doped diamond (BDD) electrodes (as cathode and anode) under batch recirculation mode. A central composite rotatable design (CCRD) was run down to model and assess the influence of initial pH in an interval of 3.71 to 11.28, the current density in an interval of 34.32 to 185.68 mA cm-2, and liquid volumetric flow rate in an interval of 0.58 to 1.42 L min-1, and conduct the convex optimization to obtain the maximum degradation efficiency. Experimental results were modeled through a second-order polynomial equation having a determination coefficient (R2) of 0.9705 with a variance coefficient of 1.1%. Optimal operating conditions found (initial pH of 5.38, current density (j) of 34.4 mA cm-2, and liquid flow rate (Q) of 1.42 L min-1) led to a global maximum degradation efficiency, COD removal efficiency, and mineralization efficiency of 89.3, 51.6 and 53.1%, respectively, with an energy consumption of 0.041 kWh L-1 within 9 h of treatment. Additionally, a pseudo-zero-order kinetic model was demonstrated to fit the experimental data and the calculated pseudo-zero-order kinetic constant (kapp) was 13.14 mg L-1 h-1 (2.54 × 10-5 mol dm-3 h-1). Furthermore, the total operating cost was of 0.47 US$ L-1. Finally, this research could be helpful for the treatment of wastewater containing an anti-COVID-19 drug such as CQ.

Supplementary Information

The online version contains supplementary material available at 10.1007/s10008-023-05452-7.

Investigation of Chloroquine Resinate Feasibility and In Vitro Taste Masking Evaluation for Pediatric Formulations

In this study, chloroquine resinates were prepared at a 1:1 (w:w) drug-to-resin ratio using the batch method with polacrilex (PC), sodium polystyrene sulfonate (SPS), and polacrilin potassium (PP) ion exchange resins (IER). The influence of drug/resin ratio and pH of the medium on drug loading efficiency was explored. UV-VIS spectrophotometric analysis showed that SPS resin had high loading efficiency for chloroquine diphosphate (CLP), above 89%, regardless of the pH. PP resin was more effective at pH 5.0 (90.68%) than at pH 1.0 (2.09%), and PC resin had only 27.63% of CLP loading efficiency. CLP complexation with IER yielded amorphous mixtures according to results from differential scanning calorimetry (DSC) and X-ray powder diffraction (XRPD), thus indicating drug-resin interaction. The taste masking efficiency was evaluated with in vitro methods using an adapted dissolution test and an electronic tongue system. During dissolution tests, SPS released only 1.0% of CLP after 300 s, while PP released over 10% after 90 s in simulated saliva solution. The electronic tongue distinguished the samples containing CLP, resins, and resinates by using multidimensional projection techniques that indicated an effective drug taste masking. In an accelerated stability study, the drug contents did not decrease in chloroquine resinates, and there was no physical degradation of the resinates after 60 days. Using chloroquine resinates therefore represents a novel way to evaluate taste masking in vitro which is relevant for the early formulation development process.

New liquid oral formulations of hydroxychloroquine: a physicochemical stability study

Objectives

Hydroxychloroquine (HCQ) presents many drug properties that increase its therapeutic use. There are, indeed, different research pathways in numerous autoimmune, inflammatory, and infectious diseases, as well as in cancerology. HCQ is only marketed as HCQ sulfate in film-coated or coated tablets for oral use. No pediatric liquid form is currently available on the market. The purpose of the present study is to develop oral liquid formulations for HCQ at 50 mg/mL with two different oral vehicle suspensions, namely ORA-Plus®/ORA-Sweet® (ORA) and Syrspend® SF PH 4 (SYR).

Methods

The suspension stability was assessed in different storage conditions (4 and 25 °C). A high-pressure liquid chromatography (HPLC) stability-indicating method with UV detection was developed to determine HCQ concentrations in the different formulations, and detect potential degradation products. Physical parameters, e.g. pH and osmolality were also monitored during the period of the stability study.

Results

HCQ concentration, osmolality, and pH remained stable for 90 days at 4 and 30 °C for HCQ in 50% ORA-Plus®/50% ORA-Sweet®. For HCQ suspension in SYR, the suspension remained stable 90 days at 4 °C and 60 days at 30 °C.

Conclusions

For all preparations, no significant physical or chemical modification was noticed during the period of the study.

Improving Encapsulation of Hydrophilic Chloroquine Diphosphate into Biodegradable Nanoparticles: A Promising Approach against Herpes Virus Simplex-1 Infection

Chloroquine diphosphate (CQ) is a hydrophilic drug with low entrapment efficiency in hydrophobic nanoparticles (NP). Herpes simplex virus type 1 (HSV-1) is an enveloped double-stranded DNA virus worldwide known as a common human pathogen. This study aims to develop chloroquine-loaded poly(lactic acid) (PLA) nanoparticles (CQ-NP) to improve the chloroquine anti- HSV-1 efficacy. CQ-NP were successfully prepared using a modified emulsification-solvent evaporation method. Physicochemical properties of the NP were monitored using dynamic light scattering, atomic force microscopy, drug loading efficiency, and drug release studies. Spherical nanoparticles were produced with modal diameter of <300 nm, zeta potential of −20 mv and encapsulation efficiency of 64.1%. In vitro assays of CQ-NP performed in Vero E6 cells, using the MTT-assay, revealed different cytotoxicity levels. Blank nanoparticles (B-NP) were biocompatible. Finally, the antiviral activity tested by the plaque reduction assay revealed greater efficacy for CQ-NP compared to CQ at concentrations equal to or lower than 20 µg mL⁻¹ (p < 0.001). On the other hand, the B-NP had no antiviral activity. The CQ-NP has shown feasible properties and great potential to improve the antiviral activity of drugs.